Crestron HR-310-BTN Manual de Usario
Lee a continuación 📖 el manual en español para Crestron HR-310-BTN (2 páginas) en la categoría Cambiar. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
HR-310-BTN
Engravable Buttons for HR-310
Installation Guide
Product Page Instructional Video
Description
The Crestron® HR-310-BTN BLANK and the HR-310-BTN ENGRAVED are sets of blank and engravable buttons,
respectively, that are designed to replace the default button set installed in an HR-310 or HR-310-I handheld remote
(not included). Each button set contains nine congurable hard buttons. A custom-engraved button frame that
secures the custom button set to the remote is also included with each engraving order.
Customized hard buttons for the HR-310-BTN ENGRAVED can be created and ordered using Crestron Engraver
software. For more information, refer to the Crestron Engraver help le that is packaged with the software.
Installation
Use the following procedure to install the HR-310-BTN in an HR-310 or HR-310-I remote.
NOTE: To view an instructional video showing these steps, visit , or use a QR reader https://vimeo.com/250110905
application on your mobile device to scan the “Instructional Video” QR image located in “Additional Resources.”
1. Align the two pegs on top of the included button removal tool with the two small holes on the rear of the remote
(behind the button cover).
Aligning the Button Removal Tool with the Remote
Additional Resources
Visit the product page on the Crestron website
( ) for additional information and the latest www.crestron.com
rmware updates. An instructional video showing how to
install the HR-310-BTN buttons into an HR-310 or HR-310-I
remote can also be viewed. Use a QR reader application on
your mobile device to scan the QR images, or click the QR
images to load the web pages.
Button cover
HR-310-BTN
button removal
tool
HR-310/HR-310-I
2. Place the button removal tool on a at, level surface. Then, use two ngers to rmly press down on the left and
right buttons in the middle row of removable buttons on the remote until the frame pops up. Refer to the
illustration on the following page.
NOTE: The button cover can be removed only using the button removal tool.
Removing the Button Cover
HR-310/HR-310-I
(top rear view)
Align top pegs on
button removal tool
with these holes
3. Remove the button removal tool from the rear of the remote.
4. Remove the default button set from the button compartment by pulling it up and out of the compartment.
5. Position the HR-310-BTN replacement button set so that the tabs on top and bottom of the button set align
with the slots on the top and bottom of the button compartment, and then place the button set into the
compartment, bottom side rst. Refer to the following illustration.
Installing the Replacement Button Set in the Remote
Engraved button cover
HR-310-BTN
button set
Button compartment
6. Attach the custom-engraved button cover so that the tab on the bottom of the cover enters the slot on the
bottom of the button compartment. Then, gently press the top of the cover down into the remote until the cover
is secured.
Attaching the Engraved Button Cover to the Remote
Removing the Button Cover - Button Press Locations
1 2 3
454 6
7 8 9
0ENTER
x
Press the left and
right buttons in the
middle row rmly
until the cover pops up
Top slots in remote (2)
Bottom slots in remote (2) Bottom tabs on button set (2)
Top tabs on button set (2)
As of the date of manufacture, the product has been tested
and found to comply with specifications for CE marking.
Product warranty can be found at
www.crestron.com/warranty.
The specic patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or
registered trademarks of Crestron Electronics, Inc. in the
United States and/or other countries.
Other trademarks, registered trademarks, and trade names
may be used in this document to refer to either the entities
claiming the marks and names or their products. Crestron
disclaims any proprietary interest in the marks and names of
others. Crestron is not responsible for errors in typography or
photography.
This document was written by the Technical Publications
department at Crestron.
©2018 Crestron Electronics, Inc.
Crestron Electronics, Inc. Installation Guide
15 Volvo Drive DOC. 8224D
Rockleigh, NJ 07647 (2049461)
Tel: 888.CRESTRON 01.18
Fax: 201.767.7576 Specications subject to
www.crestron.com change without notice.
Especificaciones del producto
| Marca: | Crestron |
| Categoría: | Cambiar |
| Modelo: | HR-310-BTN |
¿Necesitas ayuda?
Si necesitas ayuda con Crestron HR-310-BTN haz una pregunta a continuación y otros usuarios te responderán
Cambiar Crestron Manuales
18 Septiembre 2024
17 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
Cambiar Manuales
- Cambiar Honeywell
- Cambiar Yamaha
- Cambiar Abus
- Cambiar Alcatel
- Cambiar Alecto
- Cambiar Apc
- Cambiar Alpine
- Cambiar Ansmann
- Cambiar Edimax
- Cambiar Intermatic
- Cambiar Brennenstuhl
- Cambiar Hikvision
- Cambiar Generac
- Cambiar Silvercrest
- Cambiar Nedis
- Cambiar Asus
- Cambiar Eminent
- Cambiar Renkforce
- Cambiar TP Link
- Cambiar Manhattan
- Cambiar Black Box
- Cambiar Elro
- Cambiar KlikaanKlikuit
- Cambiar Ei Electronics
- Cambiar Tripp Lite
- Cambiar DataVideo
- Cambiar Schneider
- Cambiar Chamberlain
- Cambiar Sylvania
- Cambiar Velleman
- Cambiar Tork
- Cambiar Techly
- Cambiar Emerson
- Cambiar Totolink
- Cambiar Vemer
- Cambiar Profile
- Cambiar Cisco
- Cambiar Matrox
- Cambiar Steren
- Cambiar Perel
- Cambiar Engenius
- Cambiar Plantronics
- Cambiar Digitus
- Cambiar Kathrein
- Cambiar AV:link
- Cambiar Belkin
- Cambiar Linksys
- Cambiar Dahua Technology
- Cambiar Audiovox
- Cambiar Netgear
- Cambiar LevelOne
- Cambiar Kaiser
- Cambiar QNAP
- Cambiar Boss
- Cambiar Shimano
- Cambiar Merten
- Cambiar Goobay
- Cambiar Hager
- Cambiar Mercusys
- Cambiar Chacon
- Cambiar Elation
- Cambiar Sygonix
- Cambiar Planet
- Cambiar ZyXEL
- Cambiar Rex
- Cambiar Clas Ohlson
- Cambiar Powerfix
- Cambiar Tesla
- Cambiar EVE
- Cambiar D-Link
- Cambiar Tenda
- Cambiar UPM
- Cambiar Finder
- Cambiar Delta Dore
- Cambiar Ubiquiti Networks
- Cambiar EBERLE
- Cambiar Grasslin
- Cambiar Eaton
- Cambiar Jung
- Cambiar CyberPower
- Cambiar Basetech
- Cambiar Trendnet
- Cambiar Mikrotik
- Cambiar WHALE
- Cambiar ATen
- Cambiar Fibaro
- Cambiar RGBlink
- Cambiar Gefen
- Cambiar Nexa
- Cambiar Dormakaba
- Cambiar Adder
- Cambiar Wago
- Cambiar Homematic IP
- Cambiar Monoprice
- Cambiar OSD Audio
- Cambiar SPC
- Cambiar Unify
- Cambiar ORNO
- Cambiar Berker
- Cambiar Provision ISR
- Cambiar Monacor
- Cambiar PCE
- Cambiar Logilink
- Cambiar Smart-AVI
- Cambiar StarTech.com
- Cambiar SIIG
- Cambiar Advantech
- Cambiar IOGEAR
- Cambiar Micro Connect
- Cambiar Extron
- Cambiar KanexPro
- Cambiar Blustream
- Cambiar Avocent
- Cambiar Shelly
- Cambiar Intellinet
- Cambiar Ebode
- Cambiar Lancom
- Cambiar Robbe
- Cambiar B-tech
- Cambiar Speaka
- Cambiar Kopp
- Cambiar Vimar
- Cambiar Kemo
- Cambiar GAO
- Cambiar H-Tronic
- Cambiar Legrand
- Cambiar Kraus & Naimer
- Cambiar Noble
- Cambiar Intertechno
- Cambiar Ecler
- Cambiar Inverto
- Cambiar Triax
- Cambiar Kramer
- Cambiar CYP
- Cambiar Suevia
- Cambiar Phoenix Contact
- Cambiar Maclean Energy
- Cambiar SmartAVI
- Cambiar Cudy
- Cambiar Heitronic
- Cambiar Lindy
- Cambiar SEC24
- Cambiar Cooking Performance Group
- Cambiar Ernitec
- Cambiar Atlona
- Cambiar Adviti
- Cambiar Flic
- Cambiar IB Connect
- Cambiar Liberty
- Cambiar Hamlet
- Cambiar Paladin
- Cambiar Equip
- Cambiar Noark
- Cambiar Vivolink
- Cambiar Cambium Networks
- Cambiar 2USB
- Cambiar Roline
- Cambiar KVM-TEC
- Cambiar AMX
- Cambiar BZBGear
- Cambiar STI
- Cambiar Epiphan
- Cambiar Mach Power
- Cambiar Axing
- Cambiar Juniper
- Cambiar Raritan
- Cambiar ConnectPro
- Cambiar SunBriteTV
- Cambiar Atlantis Land
- Cambiar GEV
- Cambiar Pizzato Elettrica
- Cambiar Baco
- Cambiar SEADA
- Cambiar Doepke
- Cambiar Comet
- Cambiar IPGARD
- Cambiar CSL
- Cambiar Setti+
- Cambiar PureLink
Últimos Cambiar Manuales
27 Octubre 2024
27 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024