CyberLink Screen Recorder 4 Manual de Usario
CyberLink
Licencia de software y extensión
Screen Recorder 4
Lee a continuación 📖 el manual en español para CyberLink Screen Recorder 4 (77 páginas) en la categoría Licencia de software y extensión. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/77
All rights reserved.
To the extent allowed by law, Screen Recorder IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY FOR INFORMATION, SERVICES, OR
PRODUCTS PROVIDED THROUGH OR IN CONNECTION WITH Screen Recorder
AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, EXPECTATION OF PRIVACY, OR NON-INFRINGEMENT.
BY USING THIS SOFTWARE, YOU AGREE THAT CYBERLINK WILL NOT BE LIABLE
FOR ANY DIRECT, INDIRECT, OR CONSEQUENTIAL LOSS ARISING FROM THE
USE OF THIS SOFTWARE OR MATERIALS CONTAINED EITHER IN THIS
PACKAGE.
The terms and conditions here under shall be governed and construed in
accordance with the laws of Taiwan.
Screen Recorder is a registered trademark along with other company and
product names mentioned in this publication, used for identication purposes
and remain the exclusive property of their respective owners.
Mailing Address CyberLink Corporation
15F., No. 100, Minquan Rd., Xindian Dist.
New Taipei City 231, Taiwan (R.O.C.)
Web Site https://www.cyberlink.com
Telephone 886-2-8667-1298
Fax 886-2-8667-1385
Copyright © 2018 CyberLink Corporation. All rights reserved.
i
ii
1
Introduction
Chapter 1:
This chapter introduces CyberLink Screen Recorder and reviews the minimum
system requirements for the program.
Note: this document is for reference and informational use only. Its content
and the corresponding program are subject to change without notice.
Welcome to the CyberLink family of digital media tools. CyberLink Screen Recorder
lets you capture everything on your desktop, including screencasts, streaming
videos, Skype calls, and more. You can also use CyberLink Screen Recorder to
stream video from your desktop and webcam directly to Twitch, YouTube,
Facebook, and custom servers.
This section outlines some of the latest features within the Screen Recorder
program.
Stream video to multiple locations at once.
Stream video to custom servers.
Include video overlays, such as logos or other images, in your recordings or
streamed video.
Preview and set the size/location of the webcam video and video overlays in
the preview window.
Customize bitrates for recorded video and individual video streams.
Use chroma key to key out and replace the background in your webcam
video.
Customize keyboard hotkeys to your preferences.
2
CyberLink Screen Recorder 4
The features that are available in Screen Recorder are completely dependent on the
edition you have installed on your computer. Click the Screen Recorder logo in the
top left to determine the version, edition, and build number for your copy of Screen
Recorder.
Software upgrades and updates (patches) are periodically available from CyberLink.
Note: you must connect to the Internet to use this feature.
To update your software, do this:
1. Open the Notication Center by doing one of the following:
click the button when it's enabled.
click the Screen Recorder logo in the top left of the window, and then click
the Upgrade the About Screen Recorder windowbutton in .
2. Click the feature you would like to upgrade to, or the patch you want to
update to.
3. A web browser window opens, where you can purchase product upgrades or
download the latest patch update.
3
Introduction
The system requirements listed below are recommended as minimums for general
digital video production work.
Minimum System Requirements
Operating
System
Microsoft Windows 10, 8/8.1, 7 (Windows 10 64bit
recommended)
Processor (CPU)
Intel Core™ i-series or AMD Phenom® II
Graphics
Processor (GPU)
Desktop recording: 1 GB VGA VRAM
Game recording: 3 GB VGA VRAM
Memory
2 GB (6 GB or above recommended)
Hard Disk Space
600 MB for product installation
Capture Device
Webcam (built-in or external USB)
Sound Card
Windows compatible sound card
Internet
Connection
Required for program activation, streaming, and online
services
Screen
Resolution
1024 x 768, 16-bit color (up to 2560 x 1440)
Note: please consult the CyberLink web site (https://www.cyberlink.com) for
the most recent system requirements information.
4
CyberLink Screen Recorder 4
Chapter 2:
Screen Recorder lets you capture a video of your mouse movements and computer
usage, allowing you to create instruction videos, and record webcasts/screencasts,
streaming videos, Skype calls, and much more.
Note: while recording you can click the button on the UI, or use the
hotkey specified in preferences, to take a photo screenshot at any time. The
screenshot feature is only available during recording and streaming.
With the Screen Recorder, you can:
Record at Full Screen
Record a Custom Sized Area of Your Desktop
Record by Locking to a Desktop App
Record a Game
Record from a Connected Device
To launch the Screen Recorder, double-click on its desktop icon or select CyberLink
Screen Recorder 4 from the Windows start menu. The Screen Recorder window
displays.
The Full screen option in Screen Recorder lets you record your entire computer's
desktop. To record at full screen, do this:
1. Launch Screen Recorder.
2. On the Record tab, click the Full Screen option.
Note: this option records the entire desktop of your computer. If you try and
adjust the capture area, Screen Recorder will switch to the record a custom
area option.
5
Recording Video
3. Set the recording options as follows:
Video resolution: select the resolution of the recorded video from the drop-
down. Select the Original Resolution option to match your current Windows
display resolution.
Video framerate: select the framerate of the recorded video from the drop-
down.
Mouse clicks*: choose whether you want to include a colored animation used
to illustrate that a mouse click was performed in your recording. If you select
Yes, click (or the colored dot) to set the color of the animation. Select the
option, or No, if you don't want the animation to appear in your video.
Note: * this feature is only available in the Deluxe edition of Screen Recorder
4.
4. If required, you can choose to include the video feed from a webcam, audio
from a microphone, and video overlays in your recording. To include, do this:
Click the webcam button to enable and include the video
feed from a connected webcam in your recording. After
enabling, click on the button to set the size and
position of your webcam video in the preview window.
See Adjusting Webcam/PiP Image Size/Position for more
information.
At any time, you can click the down arrow to the right of
the button to quickly change the resolution of the
webcam video.
Note: the first time you enable this feature, you may be
asked to set up your webcam in Webcam Preferences.
Click the microphone button to enable and include the
audio from a connected microphone in your recording.
After enabling, use the available slider to set the input
volume for your microphone. You can also click the down
arrow to the right of the button to quickly access all of the
Audio Preferences.
6
CyberLink Screen Recorder 4
Note: the first time you enable this feature, you may be
asked to set up your microphone in Audio Preferences.
Click the video overlays button to enable and include
video overlays, such as images or logos, on your recorded
video. Click the + next to the button to add PiP images
and set the opacity of the images and webcam window.
See Video Overlays for more information.
5. If you'd like it to be a timed recording, select the Time limit option, and then
enter how long you want Screen Recorder to record in the field provided.
6. When ready, click REC to begin recording.
Note: before you start your recording, you can click to open the
preview window to see what your recording will look like. See Previewing
Recording/Stream for more information.
7. When you are done recording, click the Stop button, or press the hotkey
specified in preferences, to stop the recording and save the file in the folder
selected in File Preferences.
Note: trim out unwanted recorded video if required, you can and perform
other edits after the recording is complete.
The Game option in Screen Recorder lets you record a video game or other
program running in exclusive or Windows mode on your computer. To record a
game, do this:
1. Launch Screen Recorder.
2. On the Record tab, click the Game option.
3. Set the recording options as follows:
Video resolution: select the resolution of the recorded video from the drop-
down. Select the Original Resolution option to match your current Windows
display resolution.
7
Recording Video
Video framerate: select the framerate of the recorded video from the drop-
down.
Application: choose the game or program in the drop-down you want to
record.
Note: if you want to record a video game that runs in exclusive mode (i.e.
running in DirectX or OpenCL), you do not have to select anything from this
drop-down. Once you launch the video game/program in exclusive mode,
Screen Recorder will configure itself to record the exclusive mode content. If
the game is running in Window mode, then you need to select it here.
4. If required, you can choose to include the video feed from a webcam, audio
from a microphone, and video overlays in your recording. To include, do this:
Click the webcam button to enable and include the video
feed from a connected webcam in your recording. After
enabling, click on the button to set the size and
position of your webcam video in the preview window.
See Adjusting Webcam/PiP Image Size/Position for more
information.
At any time, you can click the down arrow to the right of
the button to quickly change the resolution of the
webcam video.
Note: the first time you enable this feature, you may be
asked to set up your webcam in Webcam Preferences.
Click the microphone button to enable and include the
audio from a connected microphone in your recording.
After enabling, use the available slider to set the input
volume for your microphone. You can also click the down
arrow to the right of the button to quickly access all of the
Audio Preferences.
Note: the first time you enable this feature, you may be
asked to set up your microphone in Audio Preferences.
8
CyberLink Screen Recorder 4
Click the video overlays button to enable and include
video overlays, such as images or logos, on your recorded
video. Click the + next to the button to add PiP images
and set the opacity of the images and webcam window.
See Video Overlays for more information.
5. If you'd like it to be a timed recording, select the Time limit option, and then
enter how long you want Screen Recorder to record in the field provided.
6. When ready, click REC to begin recording.
Note: before you start your recording, you can click to open the
preview window to see what your recording will look like. See Previewing
Recording/Stream for more information.
7. When you are done recording, click the Stop button, or press the hotkey
specified in preferences, to stop the recording and save the file in the folder
selected in File Preferences.
Note: if required, you can trim out unwanted recorded video and perform
other edits after the recording is complete.
The Lock to app option in Screen Recorder lets you select and record within a
running desktop app on your computer. To record by locking to a desktop app, do
this:
1. Launch Screen Recorder.
2. On the Record tab, click the Lock to app option.
3. Hover your mouse over the desktop app you want to record within and then
click in its window to set the capture area. Note that a yellow dotted line is
drawn around the program.
9
Recording Video
This indicates the screen area that will be captured during the recording. If
you move the desktop app, the Screen Recorder will follow the window.
4. Set the recording options as follows:
Video resolution: select the resolution of the recorded video from the drop-
down. Select the Original Resolution option to match your current Windows
display resolution.
Video framerate: select the framerate of the recorded video from the drop-
down.
Mouse clicks*: choose whether you want to include a colored animation used
to illustrate that a mouse click was performed in your recording. If you select
Yes, click (or the colored dot) to set the color of the animation. Select the
option, or No, if you don't want the animation to appear in your video.
Note: * this feature is only available in the Deluxe edition of Screen Recorder
4.
5. If required, you can choose to include the video feed from a webcam, audio
from a microphone, and video overlays in your recording. To include, do this:
10
CyberLink Screen Recorder 4
Click the webcam button to enable and include the video
feed from a connected webcam in your recording. After
enabling, click on the button to set the size and
position of your webcam video in the preview window.
See Adjusting Webcam/PiP Image Size/Position for more
information.
At any time, you can click the down arrow to the right of
the button to quickly change the resolution of the
webcam video.
Note: the first time you enable this feature, you may be
asked to set up your webcam in Webcam Preferences.
Click the microphone button to enable and include the
audio from a connected microphone in your recording.
After enabling, use the available slider to set the input
volume for your microphone. You can also click the down
arrow to the right of the button to quickly access all of the
Audio Preferences.
Note: the first time you enable this feature, you may be
asked to set up your microphone in Audio Preferences.
Click the video overlays button to enable and include
video overlays, such as images or logos, on your recorded
video. Click the + next to the button to add PiP images
and set the opacity of the images and webcam window.
See Video Overlays for more information.
6. If you'd like it to be a timed recording, select the Time limit option, and then
enter how long you want Screen Recorder to record in the field provided.
7. When ready, click REC to begin recording.
Note: before you start your recording, you can click to open the
preview window to see what your recording will look like. See Previewing
Recording/Stream for more information.
11
Recording Video
8. When you are done recording, click the Stop button, or press the hotkey
specified in preferences, to stop the recording and save the file in the folder
selected in File Preferences.
Note: trim out unwanted recorded video if required, you can and perform
other edits after the recording is complete.
The Custom option in Screen Recorder lets you manually customize the size of the
area on your computer's desktop that you record. To record a custom sized area on
your desktop, do this:
1. Launch Screen Recorder.
2. On the Record tab, click the Custom option.
3. Use your mouse to manually set the size of the capture area by clicking and
dragging your mouse.
12
CyberLink Screen Recorder 4
You can resize the selected capture area at any time before you start
recording.
Set the recording options as follows:
Video resolution: select the resolution of the recorded video from the drop-
down. Select the Original Resolution option to match your current Windows
display resolution.
Video framerate: select the framerate of the recorded video from the drop-
down.
Mouse clicks*: choose whether you want to include a colored animation used
to illustrate that a mouse click was performed in your recording. If you select
Yes, click (or the colored dot) to set the color of the animation. Select the
, if you don't want the animation to appear in your video.option, or No
Note: * this feature is only available in the Deluxe edition of Screen Recorder
4.
5. If required, you can choose to include the video feed from a webcam, audio
from a microphone, and video overlays in your recording. To include, do this:
13
Recording Video
Click the webcam button to enable and include the video
feed from a connected webcam in your recording. After
enabling, click on the button to set the size and
position of your webcam video in the preview window.
See Adjusting Webcam/PiP Image Size/Position for more
information.
At any time, you can click the down arrow to the right of
the button to quickly change the resolution of the
webcam video.
Note: the first time you enable this feature, you may be
asked to set up your webcam in Webcam Preferences.
Click the microphone button to enable and include the
audio from a connected microphone in your recording.
After enabling, use the available slider to set the input
volume for your microphone. You can also click the down
arrow to the right of the button to quickly access all of the
Audio Preferences.
Note: the first time you enable this feature, you may be
asked to set up your microphone in Audio Preferences.
Click the video overlays button to enable and include
video overlays, such as images or logos, on your recorded
video. Click the + next to the button to add PiP images
and set the opacity of the images and webcam window.
See Video Overlays for more information.
6. If you'd like it to be a timed recording, select the Time limit option, and then
enter how long you want Screen Recorder to record in the field provided.
7. When ready, click REC to begin recording.
Note: before you start your recording, you can click to open the
preview window to see what your recording will look like. See Previewing
Recording/Stream for more information.
14
CyberLink Screen Recorder 4
8. When you are done recording, click the Stop button, or press the hotkey
specified in preferences, to stop the recording and save the file in the folder
selected in File Preferences.
Note: if required, you can trim out unwanted recorded video and perform
other edits after the recording is complete.
The Device option in Screen Recorder lets you record from an external device that is
connected to your computer via HDMI, USB, etc. To record from a connected
device, do this:
1. Launch Screen Recorder.
2. On the Record tab, click the Device option.
3. Set the recording options as follows:
Input device: select the device in the drop-down that you want to record
from.
Note: make sure the device is firmly connected and powered on (if required)
before launching Screen Recorder.
Video resolution: select the resolution of the recorded video from the drop-
down. Select the Original Resolution option to match your current Windows
display resolution.
Video framerate: select the framerate of the recorded video from the drop-
down.
4. If required, you can choose to include the video feed from a webcam, audio
from a microphone, and video overlays in your recording. To include, do this:
Click the webcam button to enable and include the video
feed from a connected webcam in your recording. After
enabling, click on the button to set the size and
position of your webcam video in the preview window.
15
Recording Video
See Adjusting Webcam/PiP Image Size/Position for more
information.
At any time, you can click the down arrow to the right of
the button to quickly change the resolution of the
webcam video.
Note: the first time you enable this feature, you may be
asked to set up your webcam in Webcam Preferences.
Click the microphone button to enable and include the
audio from a connected microphone in your recording.
After enabling, use the available slider to set the input
volume for your microphone. You can also click the down
arrow to the right of the button to quickly access all of the
Audio Preferences.
Note: the first time you enable this feature, you may be
asked to set up your microphone in Audio Preferences.
Click the video overlays button to enable and include
video overlays, such as images or logos, on your recorded
video. Click the + next to the button to add PiP images
and set the opacity of the images and webcam window.
See Video Overlays for more information.
5. If you'd like it to be a timed recording, select the Time limit option, and then
enter how long you want Screen Recorder to record in the field provided.
6. When ready, click REC to begin recording.
Note: before you start your recording, you can click to open the
preview window to see what your recording will look like. See Previewing
Recording/Stream for more information.
7. When you are done recording, click the Stop button, or press the hotkey
specified in preferences, to stop the recording and save the file in the folder
selected in File Preferences.
16
CyberLink Screen Recorder 4
Note: trim out unwanted recorded video if required, you can and perform
other edits after the recording is complete.
17
Streaming Video
Streaming Video
Chapter 3:
Screen Recorder can stream video from your computer directly to Twitch, YouTube,
Facebook, and to a custom server. You can stream to just one of these locations, or
stream to multiple locations at once.
Note: button on the UI, or use thewhile streaming you can click the
hotkey specified in preferences, to take a photo screenshot at any time. The
screenshot feature is only available during recording and streaming.
Streaming Video to Twitch
Screen Recorder can stream video from your desktop, computer game, connected
device, etc. directly to Twitch. To stream video to Twitch, do this:
1. Launch Screen Recorder.
2. On the Record tab, first select and set up what you want to stream. See
Recording Video for detailed information.
3. Click on the Stream tab, on the Twitch button, and then select the check box
above the Twitch button to enable streaming.
4. Click the Login button and then follow the instructions to sign in to your
Twitch account and authorize Screen Recorder to stream video to it.
Note: once you sign in and authorize your account, Screen Recorder will
automatically get the stream key needed to broadcast your video stream on
Twitch.
5. Once you're signed in, click the button to set the following stream
options:
Server: select the server you want to use for streaming.
Title: enter a title for your streamed video.
6. Set the recording options as follows:
18
CyberLink Screen Recorder 4
Video resolution: select the resolution of the streamed video from the drop-
down. Select the Or iginal R esolution option to match your current Windows
display resolution.
Video framerate: select the framerate of the streamed video from the drop-
down.
Live URL: displays the URL for your live stream. Click the Copy button to copy
it for sharing.
7. If required, you can choose to include the video feed from a webcam, audio
from a microphone, and video overlays in your streaming video. To include,
do this:
Click the webcam button to enable and include the video
feed from a connected webcam in your video stream.
After enabling, click on the button to set the size
and position of your webcam video in the preview
window. See Adjusting Webcam/PiP Image Size/Position
for more information.
At any time, you can click the down arrow to the right of
the button to quickly change the resolution of the
webcam video.
Note: the first time you enable this feature, you may be
asked to set up your webcam in Webcam Preferences.
Click the microphone button to enable and include the
audio from a connected microphone in your video
stream. After enabling, use the available slider to set the
input volume for your microphone. You can also click the
down arrow to the right of the button to quickly access all
of the Audio Preferences.
Note: the first time you enable this feature, you may be
asked to set up your microphone in Audio Preferences.
Click the video overlays button to enable and include
video overlays, such as images or logos, in your video
stream. Click the + next to the button to add PiP images
and set the opacity of the images and webcam window.
See Video Overlays for more information.
19
Streaming Video
8. Select the Save streamed video to disk option if you want to save a copy of
the streamed video on your computer's hard drive. The file is saved in the
export folder selected in File Preferences.
9. When ready, click Live to begin streaming.
10. When you are done streaming, click the Stop button, or press the hotkey
specified in preferences, to stop the streaming.
Streaming Video to YouTube
Screen Recorder can stream video from your desktop, computer game, connected
device, etc. directly to YouTube. To stream video to YouTube, do this:
1. Launch Screen Recorder.
2. On the Record tab, first select and set up what you want to stream. See
Recording Video for detailed information.
3. Click on the Stream tab, on YouTube button, and then select the check box
above the YouTube button to enable streaming.
4. Click the Login button and then follow the instructions to log in to your
YouTube account and authorize Screen Recorder to stream video to it.
Note: once you sign in and authorize your account, Screen Recorder will
automatically get the stream key needed to broadcast your video stream on
YouTube.
5. Once you're signed in, click the button to set the following stream
options:
Title: enter a title for your streamed video.
Privacy: select whether you want the stream to be public, unlisted, or private.
6. Set the recording options as follows:
Video resolution: select the resolution of the streamed video from the drop-
down. Select the Original Resolution option to match your current Windows
display resolution.
Video framerate: select the framerate of the streamed video from the drop-
down.
20
CyberLink Screen Recorder 4
Live URL: displays the URL for your live stream. Click the Copy button to copy
it for sharing.
7. If required, you can choose to include the video feed from a webcam, audio
from a microphone, and video overlays in your streaming video. To include,
do this:
Click the webcam button to enable and include the video
feed from a connected webcam in your video stream.
After enabling, click on the button to set the size
and position of your webcam video in the preview
window. See Adjusting Webcam/PiP Image Size/Position
for more information.
At any time, you can click the down arrow to the right of
the button to quickly change the resolution of the
webcam video.
Note: the first time you enable this feature, you may be
asked to set up your webcam in Webcam Preferences.
Click the microphone button to enable and include the
audio from a connected microphone in your video
stream. After enabling, use the available slider to set the
input volume for your microphone. You can also click the
down arrow to the right of the button to quickly access all
of the Audio Preferences.
Note: the first time you enable this feature, you may be
asked to set up your microphone in Audio Preferences.
Click the video overlays button to enable and include
video overlays, such as images or logos, in your video
stream. Click the + next to the button to add PiP images
and set the opacity of the images and webcam window.
See Video Overlays for more information.
8. Select the Save streamed video to disk option if you want to save a copy of
the streamed video on your computer's hard drive. The file is saved in the
export folder selected in File Preferences.
9. When ready, click Live to begin streaming.
21
Streaming Video
10. When you are done streaming, click the Stop button, or press the hotkey
specified in preferences, to stop the streaming.
Streaming Video to Facebook
Screen Recorder can stream video from your desktop, computer game, connected
device, etc. directly to Facebook. To stream video to Facebook, do this:
1. Launch Screen Recorder.
2. On the Record tab, first select and set up what you want to stream. See
Recording Video for detailed information.
3. Click on the Stream tab, on the Facebook button, and then select the check
box above the Facebook button to enable streaming.
4. Click the Continue with Facebook button and then follow the instructions to
log in to your Facebook account and authorize Screen Recorder to stream
video to it.
Note: once you sign in and authorize your account, Screen Recorder will
automatically get the stream key needed to broadcast your video stream on
Facebook.
5. Once you're signed in, click the button to set the following stream
options:
Choose where to post: select where you want the steaming video to be posted
on Facebook.
Title: enter a title for your streamed video.
Description: enter a short description for your live streamed video.
Privacy: select whether you want the stream to be public, private, or only
viewable by certain friends.
6. Set the recording options as follows:
Video resolution: select the resolution of the streamed video from the drop-
down. Select the Or iginal Resolution option to match your current Windows
display resolution.
22
CyberLink Screen Recorder 4
Video framerate: select the framerate of the streamed video from the drop-
down.
Live URL: displays the URL for your live stream. Click the Copy button to copy
it for sharing.
7. If required, you can choose to include the video feed from a webcam, audio
from a microphone, and video overlays in your streaming video. To include,
do this:
Click the webcam button to enable and include the video
feed from a connected webcam in your video stream.
After enabling, click on the button to set the size
and position of your webcam video in the preview
window. See Adjusting Webcam/PiP Image Size/Position
for more information.
At any time, you can click the down arrow to the right of
the button to quickly change the resolution of the
webcam video.
Note: the first time you enable this feature, you may be
asked to set up your webcam in Webcam Preferences.
Click the microphone button to enable and include the
audio from a connected microphone in your video
stream. After enabling, use the available slider to set the
input volume for your microphone. You can also click the
down arrow to the right of the button to quickly access all
of the Audio Preferences.
Note: the first time you enable this feature, you may be
asked to set up your microphone in Audio Preferences.
Click the video overlays button to enable and include
video overlays, such as images or logos, in your video
stream. Click the + next to the button to add PiP images
and set the opacity of the images and webcam window.
See Video Overlays for more information.
8. Select the Save streamed video to disk option if you want to save a copy of
the streamed video on your computer's hard drive. The file is saved in the
export folder selected in File Preferences.
23
Streaming Video
9. When ready, click Live to begin streaming.
10. When you are done streaming, click the Stop button, or press the hotkey
specified in preferences, to stop the streaming.
Streaming to Custom Server
Screen Recorder can stream video from your desktop, computer game, connected
device, etc. directly up to two custom or personal servers.
Note: Screen Recorder can only stream to custom servers that support the
RTMP streaming protocol and stream keys.
To stream video to a custom server, do this:
1. Launch Screen Recorder.
2. On the Record tab, first select and set up what you want to stream. See
Recording Video for detailed information.
3. Click on the Stream tab, on the Custom button, and then select the check box
above the Custom button to enable streaming.
4. Once selected, set up following stream and recording options:
Platform name: enter a name for your custom stream.
Video resolution: select the resolution of the streamed video from the drop-
down. Select the Or iginal Resolution option to match your current Windows
display resolution.
Video framerate: select the framerate of the streamed video from the drop-
down.
Server/URL: enter in the URL to the server that will host your live stream.
Stream key: enter the stream key provided by the server that will host your
live stream.
5. If required, you can choose to include the video feed from a webcam, audio
from a microphone, and video overlays in your streaming video. To include,
do this:
24
CyberLink Screen Recorder 4
Click the webcam button to enable and include the video
feed from a connected webcam in your video stream.
After enabling, click on the button to set the size
and position of your webcam video in the preview
window. See Adjusting Webcam/PiP Image Size/Position
for more information.
At any time, you can click the down arrow to the right of
the button to quickly change the resolution of the
webcam video.
Note: the first time you enable this feature, you may be
asked to set up your webcam in Webcam Preferences.
Click the microphone button to enable and include the
audio from a connected microphone in your video
stream. After enabling, use the available slider to set the
input volume for your microphone. You can also click the
down arrow to the right of the button to quickly access all
of the Audio Preferences.
Note: the first time you enable this feature, you may be
asked to set up your microphone in Audio Preferences.
Click the video overlays button to enable and include
video overlays, such as images or logos, in your video
stream. Click the + next to the button to add PiP images
and set the opacity of the images and webcam window.
See Video Overlays for more information.
6. Select the Save streamed video to disk option if you want to save a copy of
the streamed video on your computer's hard drive. The file is saved in the
export folder selected in File Preferences.
7. When ready, click Live to begin streaming.
8. When you are done streaming, click the Stop button, or press the hotkey
specified in preferences, to stop the streaming.
25
Streaming Video
Streaming to Multiple Locations
Screen Recorder can stream video to multiple* locations at once. To stream video
to multiple locations, do this:
Note: * this feature is only available in the Deluxe edition of Screen Recorder
4.
1. Launch Screen Recorder.
2. On the Record tab, first select and set up what you want to stream. See
Recording Video for detailed information.
3. Click on the Stream tab, and then select the check box and enter in the
required options for each of the locations you want to stream video to, i.e.
Twitch, YouTube, etc.
4. When ready, click the Live button at the bottom of one of the selected stream
locations to begin streaming.
5. Confirm that you want to live stream to all the mentioned locations by
clicking the Yes button.
Note: you cannot add a new stream location once you start the live stream.
6. When you are done streaming, click the Stop button, or press the hotkey
specified in preferences, to stop the streaming.
26
CyberLink Screen Recorder 4
Video Overlays
Chapter 4:
When recording or streaming videos, you can include video overlays in the video
image. Video overlays can be any image in the BMP, GIF, JPG, or PNG format, such
as a logo or other image. Video overlays also include your webcam video feed.
Adding PiP Images
To add PiP (picture in picture) images to your recording or stream, do this:
Note: you can have up to 10 PiP images in your video.
1. Launch Screen Recorder.
2. On the Record or Stream tab, set up your recording or stream options as
required.
3. Click the + next to the video overlays button
4. In the Video Overlays window, click Insert Image.
5. Select the image le on your computer you want to use, and then click Open.
Note: Screen Recorder supports Images in the BMP, GIF, JPG, and PNG
formats.
6. Adjust the Opacity of the image using the slider next to the added image in
the list.
7. Click + again to close the Video Overlays window.
27
Video Overlays
You can edit the added PiP images and adjust the opacity of your webcam video in
the Video Overlays window. To edit video overlays, do this:
1. On the Record or Stream tab, click the + next to the video overlays button.
2. In the Video Overlays window,
you can perform the following edits:
use the Opacity sliders to adjust the opacity of the webcam video and the PiP
images.
click to hide the webcam video or a PiP image, or to have them
display in the video.
Especificaciones del producto
| Marca: | CyberLink |
| Categoría: | Licencia de software y extensión |
| Modelo: | Screen Recorder 4 |
¿Necesitas ayuda?
Si necesitas ayuda con CyberLink Screen Recorder 4 haz una pregunta a continuación y otros usuarios te responderán
Licencia de software y extensión CyberLink Manuales
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
Licencia de software y extensión Manuales
- Licencia de software y extensión Sony
- Licencia de software y extensión Panasonic
- Licencia de software y extensión Acronis
- Licencia de software y extensión Apple
- Licencia de software y extensión Adobe
- Licencia de software y extensión Axis
- Licencia de software y extensión Nec
- Licencia de software y extensión LevelOne
- Licencia de software y extensión Native Instruments
- Licencia de software y extensión Corel
- Licencia de software y extensión D-Link
- Licencia de software y extensión Eizo
- Licencia de software y extensión Steinberg
- Licencia de software y extensión Digi
- Licencia de software y extensión Autodesk
- Licencia de software y extensión Tandberg Data
- Licencia de software y extensión FileMaker
- Licencia de software y extensión Neets
- Licencia de software y extensión Lancom
- Licencia de software y extensión Trend Micro
- Licencia de software y extensión Quark
- Licencia de software y extensión Avid
- Licencia de software y extensión ABBYY
- Licencia de software y extensión Barracuda Networks
- Licencia de software y extensión IRIS
- Licencia de software y extensión Dell Wyse
- Licencia de software y extensión AMX
- Licencia de software y extensión Telestream
- Licencia de software y extensión Symantec
- Licencia de software y extensión Mobotix
Últimos Licencia de software y extensión Manuales
26 Octubre 2024
8 Octubre 2024
3 Octubre 2024
3 Octubre 2024
17 Septiembre 2024
17 Septiembre 2024
14 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024