CyberPower Essential B704 Manual de Usario

CyberPower No categorizado Essential B704

Lee a continuación 📖 el manual en español para CyberPower Essential B704 (3 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/3
© 2017 Cyber Power Systems (USA), Inc. All rights reserved.
CONGRATULATIONS ON YOUR PURCHASE
Thank Thank you for selecting the CyberPower B704 Surge
Protector. The information contained on this package
explains the features and operation of the B704. Please take
a few moments to read this package.
FEATURES
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15A
breaker. When an overload occurs, it will automatically
switch o. To resume operation, ensure the overload
condition is removed and reset the surge protector by
switching the unit ON.
2. Surge Protected Indicator
Illuminated when the surge protection is working properly.
3. Seven Outlets
Seven standard outlets with safety covers.
SPECIFICATIONS
• Model Number: B704
• Outlets: 7
• Surge Protection: 1200 Joules
• Electrical Rating: 125V/15A/1875W
• UL Clamping Voltage: UL 1449 3rd/400V (L-N), 500V
(L-G), 500V (N-G)
• Maximum Peak Current: 60,000A
• 3 AC Lines Protected: L-N: 30,000A, L-G: 15,000A, N-G:
15,000A; (The maximum surge possible on household
wiring is 6,000 volts)
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 32dB
• EMI/RFI Filtration: 150 kHz to 100 MHz
• Circuit Breaker: Resettable 15 Amp
7-Outlet Surge Protector
B704
USER’S MANUAL
1 2
CAUTION
TO REDUCE THE RICK OF ELECTRIC SHOCK - Use only in
dry locations and only indoors. plug into another DO NOT
relocatable power tap. DO NOT “daisy chain” surge
protectors. use with any aquarium equipment. DO NOT DO
NOT use if properly grounded outlets are not available. DO
NOT install this device if there is not at least 10 meters (30
feet) or more of wire between the electrical outlet and
electrical service panel. This device features an internal
protection that will disconnect the surge protective
component at the end of its useful life, but will maintain
power to the load – now unprotected.
TROUBLESHOOTING
If the ON/OFF is switched o, the 15A circuit breaker may
have tripped. Examine your connected equipment and
remove the device that is overloading the circuit. Then, turn
the ON/OFF switch back to RESET. If the Protected
indicator does not light, the surge protector’s AC line is no
longer protected from surge. Replace the surge protector.
The surge protector may have received a power surge or
spike beyond its specified limits that overloaded the
protection circuitry and rendered it inactive. The surge
protector has protected your connected equipment but it
will not protect against future surges and spikes.
TECHNICAL SUPPORT
Please contact our Tech Support department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday,
7:00am – 6:00pm CST
1
2
3
43
LIMITED WARRANTY AND CONNECTED EQUIPMENT
GUARANTEE
Read the following terms and conditions carefully before using
the CyberPower B704 (the “CPS Product”). By using the CPS
Product, you consent to be bound by the terms and conditions of
this Limited Warranty and Connected Equipment Guarantee
(together referred to as this “Warranty”). IF YOU DO NOT AGREE
TO THE TERMS AND CONDITIONS OF THIS WARRANTY, YOU
SHOULD RETURN THE PRODUCT FOR A FULL REFUND PRIOR
TO USING IT.
Who is providing this Warranty, what does it cover?
Cyber Power Systems (USA), Inc. (“CyberPower”) provides this
Limited Warranty. It only covers the original purchaser and ends if
you no longer own the CPS Product. This warranty covers defects
in materials and workmanship in the CPS Product under normal
use and conditions. It also covers equipment connected to the
CPS Product and damaged because of the failure of the CPS
Product. This warranty covers the CPS Product and connected
equipment for as long as you own the CPS Product.
How Do You Open A Connected Equipment Claim?
1. Call us at (877) 297-6937 or write to us at Cyber Power
Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN
55379, or send us an e-mail message at claims@cpsww.com for
instructions, within 10 days of the occurrence.
2. When you contact CyberPower, identify the Product, the
Purchase Date, and the item(s) of Connected Equipment. Have
information on all applicable insurance or other resources of
recovery/payment that are available to the Initial Customer and
Request a Claim Number.
3. You must provide a dated purchase receipt (or other proof of
the original purchase) for the CyberPower unit and connected
equipment. You also need to provide a description of the
damage to your connected equipment.
4. Pack and ship the product to CyberPower and, if requested, the
item(s) of Connected Equipment, a repair cost estimate for the
damage to the Connected Equipment, and all claim forms that
CyberPower provides to you. Show the Claim Number on the
shipping label or include it with the product. You must prepay
all shipping costs, you are responsible for packaging and
shipment, and you must pay the cost of the repair estimate.
What will CyberPower do to correct problems?
CyberPower will inspect and examine the CPS Product. If the CPS
Product is defective in material or workmanship, CyberPower will
repair or replace it at CyberPower’s expense, or CyberPower will
refund the full purchase price you paid for the CPS Product
(purchase receipt showing price paid is required).
If the CPS Product failed to protect any equipment plugged into
it, we will also send you forms for making your claim for the
connected equipment. We will repair or replace the equipment
that was damaged because of the failure of the CPS Product or
pay you the fair market value (NOT REPLACEMENT COST) of the
equipment at of the time of the damage. We will use Orion Blue
Book, another third-party valuation guide, eBay, craigslist, or
other source to establish that amount. Our maximum liability is
limited to $75,000 for the B704.
Who pays for shipping?
We pay when we send items to you; you pay when you send items
to us.
What are some things this Warranty does not cover?
1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT
WAS DAMAGED OR NEEDS TO BE REPLACED DUE TO THE
FAILURE OF THE CPS PRODUCT OR ANY DATA THAT IS LOST
AS A RESULT OF THE FAILURE OR THE RESTORATION OF
DATA OR RECORDS, OR THE REINSTALLATION OF
SOFTWARE.
2. This Warranty does not cover: misuse, modification, operation
or storage outside environmental limits of the CPS Product or
the equipment connected to it, or for damage while in transit
or in storage, nor if there has been improper operation or
maintenance, or use with items not designed or intended for
use with the CPS Product, such as laser printers, appliances,
aquariums, medical or life support devices, etc.
What are the other limitations?
The sole and exclusive remedies of the Initial Customer are those
provided by this Warranty.
1. This Warranty does not apply unless the CPS Product and the
connected equipment were connected to properly wired and
grounded outlets (including compliance with electrical and
safety codes of the most current electrical code), without the
use of any adapters or other connectors.
2. The CPS Product must have been plugged directly into the
power source and the equipment connected to the CPS
Product must be directly connected in the CPS Product, not
“daisy-chained” together in serial fashion with any extension
cords, another Product or device similar to the CPS Product,
surge suppressor, or power tap. Any such installation voids the
Warranty.
3. The CPS Product and connected equipment must have been
used properly in a suitable and proper environment, in
conformance with any applicable license, instruction manual, or
warnings.
4. The CPS Product must have been used at all times within the
limitations on the CPS Product’s VA capacity.
Where can I get more information?
Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee, MN
55379; call us at (877) 297-6937; or send us an e-mail message at
claims@cpsww.com.
PRODUCT REGISTRATION
Prompt product registration assures coverage under the Limited
Warranty, and also allows the opportunity to be notified of
product enhancements, upgrades, and other announcements.
Registration is quick and easy at
www.cyberpowersystems.com/account/registration.
CONTACT INFORMATION
Cyber Power Systems (USA), Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CyberPower.com
This device is manufactured using environmentally-safe
procedures in compliance with the Restriction of Hazardous
Substances (RoHS) directive.
Please join CyberPower in caring for the environment by
recycling this manual.
© 2017 Cyber Power Systems (USA), Inc.
All rights reserved. All other trademarks are the property of
their respective owners.
K01-XXXXXXX-00

Especificaciones del producto

Marca: CyberPower
Categoría: No categorizado
Modelo: Essential B704

¿Necesitas ayuda?

Si necesitas ayuda con CyberPower Essential B704 haz una pregunta a continuación y otros usuarios te responderán


No categorizado CyberPower Manuales

CyberPower

CyberPower Rackbar RKBS20ST6F12R Manual de Usario

12 Octubre 2024
CyberPower

CyberPower PR1000ELCDRT2U Manual de Usario

10 Octubre 2024
CyberPower

CyberPower Essential B704 Manual de Usario

10 Octubre 2024
CyberPower

CyberPower Rackbar RKBS20ST6F8R Manual de Usario

7 Octubre 2024
CyberPower

CyberPower RMCARD305 Manual de Usario

4 Octubre 2024
CyberPower

CyberPower Professional CSP708T Manual de Usario

4 Octubre 2024
CyberPower

CyberPower SB0602BA-DE-B50 Manual de Usario

24 Septiembre 2024
CyberPower

CyberPower SB0802AD-DE-W24 Manual de Usario

24 Septiembre 2024
CyberPower

CyberPower SB0502BA-DE-B70 Manual de Usario

24 Septiembre 2024
CyberPower

CyberPower SB0502BA-DE-W70 Manual de Usario

24 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024