D-Link DBA-X1230P Manual de Usario

D-Link punto de acceso DBA-X1230P

Lee a continuación 📖 el manual en español para D-Link DBA-X1230P (9 páginas) en la categoría punto de acceso. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/9
Documentation is also available on
the D-Link website
This document will guide you through the basic
installation process for your new D-Link
Nuclias Cloud-Managed AX1800 Access Point
DBA-X1230P
Quick Installation Guide
Access Point
2
ENGLISH
Hardware Overview
LED Indicators
1
Figure 1: Front Panel LED
# LED Status Description
1Power/
Cloud
Solid
orange
The DBA-X1230P is booting up.
Blinking
orange
The DBA-X1230P is resetting
to its default settings or is
upgrading its rmware.
Blinking
green
The DBA-X1230P is connecting
to the D-Link Nuclias cloud.
Solid
green
The DBA-X1230P is in cloud mode.
Solid
red
The DBA-X1230P is not working
properly in cloud mode.
Table 1: LED Description
Interface Connectors
1
23 4
Figure 2: Rear Connectors
# Connector Description
1 Lock slot
Slot to use with the lock plate for inserting
a physical lock to secure the DBA-X1230P
to the mounting plate (optional).
2 Console port Directly manage the AP with no wireless
connection through the console port.
3PoE LAN
port
Gigabit RJ-45 port for data and
Power over Ethernet (PoE) power.
4 Power input Input for the power adapter (optional).
Table 2: Interface Description
Before You Begin
This installation guide provides instructions for
installing the DBA-X1230P on your network.
Additional documentation is also available on the
D-Link support website.
• D-Link Nuclias User Manual: For additional
information and instructions on how to congure
the device using the D-Link Nuclias Cloud.
• DBA-X1230P User Manual: For additional
information and instructions on how to congure
the device using the web user interface.
Package Contents
This DBA-X1230P package should include the
following items:
• 1 x DBA-X1230P
• 1 x Power adapter (optional)*
• 1 x Mounting kit
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
*If the power adapter is not included, it can be
purchased separately. Please contact your local
D-Link reseller.
Setup Preparation
Please ensure that the following items are readily
available before continuing the installation process:
• An active D-Link Nuclias account.
• An active Internet connection to connect to the
D-Link Nuclias cloud.
• A valid device license. Contact your D-Link Nuclias
service provider for more information.
System Requirements
• A PC or laptop with a working Ethernet adapter
or wireless interface.
• Mozilla Firefox 52.0 or higher, Internet Explorer
11 or higher, Safari 10.1 or higher, Google
Chrome 59 or higher.
• OS X 10.8.5, Windows 7, Linux (Ubuntu 12).
3
ENGLISH
Powering the Access Point
The DBA-X1230P can be powered using one of the
following two methods:
Using Power over Ethernet (PoE)
Use a standard Ethernet cable to connect the LAN
port on the DBA-X1230P to a PoE power source
device such as a PoE switch or PoE injector.
(Optional) Using the Power Adapter
Connect the power connector of the adapter to
the power input on the DBA-X1230P and plug the
adapter into a nearby power outlet.
Conguring the Access Point
Using D-Link Nuclias
Note: To use D-Link Nuclias, the DBA-X1230P must
be connected to the Internet.
The DBA-X1230P is designed to be managed through
the D-Link Nuclias cloud. Refer to the D-Link Nuclias
User Manual for detailed conguration instructions.
Switch or RouterSwitch or Router Management
DBA-X1230P
D-Link Nuclias
Figure 3: Connecting through D-Link Nuclias
1. On an Internet-connected PC, open a web
browser and go to www.nuclias.com.
2. Enter your D-Link Nuclias user name and
password.
If a device’s login credentials are modied using
Nuclias Cloud, the local username and password
will also reect the changes made. To learn more
about conguring your password, please refer to
the Nuclias Cloud manual.
Manual Conguration
Note: D-Link recommends manually conguring the
device before mounting it.
If you are unable to connect to the D-Link Nuclias
cloud, you may need to manually configure the
DBA-X1230P using its web user interface (UI).
Refer to the DBA-X1230P User Manual for detailed
conguration instructions.
Use one of the following methods to access the web
user interface:
Connecting through Ethernet
Note: The management PC must be in the same
subnet as the DBA-X1230P.
1. Use an Ethernet cable to connect the DBA-X1230P
to the management PC or to the switch or router
the management PC is connected to.
2. Open a web browser and type in the default
host name of the DBA-X1230P and press Enter.
The default host name is DBA-X1230P-XXXX
where XXXX represents the last 4 characters
of the MAC address listed on the device label
located on the bottom of the device.
3. When prompted, enter the default login
credentials:
User name: admin
Password: admin
Connecting Wirelessly
1. Connect the management PC to the default SSID
of the DBA-X1230P. The SSID will be in the format
DBA-X1230P-XXX where XXXX represents the
last 4 characters of the MAC address listed on the
device label located on the bottom of the device.
2. Open a web browser and type in the default
host name of the DBA-X1230P and press Enter.
The default host name is DBA-X1230P-XXXX
where XXXX represents the last 4 characters
of the MAC address listed on the device label
located on the bottom of the device.
3. When prompted, enter the default login
credentials:
User name: admin
Password: admin
Attaching the Rubber Pads
The included rubber pads can be placed on the
bottom of the device to prevent the device from
damaging the surface it is placed on.
1. Remove the rubber pads from the adhesive strip.
2. Stick one pad on each foot on the bottom panel
of the access point.

Especificaciones del producto

Marca: D-Link
Categoría: punto de acceso
Modelo: DBA-X1230P

¿Necesitas ayuda?

Si necesitas ayuda con D-Link DBA-X1230P haz una pregunta a continuación y otros usuarios te responderán


punto de acceso D-Link Manuales

D-Link

D-Link DWL-1000AP+ Manual de Usario

24 Septiembre 2024
D-Link

D-Link DWL-700AP Manual de Usario

21 Septiembre 2024
D-Link

D-Link DBA-X1230P Manual de Usario

13 Septiembre 2024
D-Link

D-Link DAP-1155 Manual de Usario

12 Agosto 2024
D-Link

D-Link DWL-8720AP Manual de Usario

9 Agosto 2024
D-Link

D-Link DAP-X2810 Manual de Usario

7 Agosto 2024
D-Link

D-Link DAP-3666 Manual de Usario

5 Agosto 2024
D-Link

D-Link DAP-3410 Manual de Usario

31 Julio 2024
D-Link

D-Link DAP-2662 Manual de Usario

29 Julio 2024
D-Link

D-Link DWL-7620AP Manual de Usario

29 Julio 2024

punto de acceso Manuales

Últimos punto de acceso Manuales

Comtrend

Comtrend WAP-PC1750W Manual de Usario

26 Octubre 2024
Allied Telesis

Allied Telesis AT-TQm5403 Manual de Usario

26 Octubre 2024
Hawking Technologies

Hawking Technologies HW17ACM Manual de Usario

26 Octubre 2024
Trendnet

Trendnet TEW-738APBO Manual de Usario

18 Octubre 2024
Cisco

Cisco Aironet 3600i Manual de Usario

18 Octubre 2024
Cisco

Cisco Aironet 3600e Manual de Usario

17 Octubre 2024
Cisco

Cisco MR12 Manual de Usario

14 Octubre 2024
Draytek

Draytek VigorAP 920R Manual de Usario

13 Octubre 2024
Netgear

Netgear WNDAP360 Manual de Usario

12 Octubre 2024
Cisco

Cisco Aironet 3700P Manual de Usario

11 Octubre 2024