D-Link DPE-301GS Manual de Usario
Lee a continuación 📖 el manual en español para D-Link DPE-301GS (3 páginas) en la categoría Splitter. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/3
Gigabit PoE+ Splitter
DPE-301GS
The DPE-301GS Gigabit PoE+ Splitter provides Gigabit connectivity and high wattage
electrical power to legacy devices that do not support PoE, by separating power and data
from a PoE source. Compliant with the 802.3at and 802.3af PoE standards, it can eectively
turns any device into a PoE device, giving you the ability to mount your non-PoE device
virtually anywhere in a building since it doesn’t require a power outlet.
Power a Wider Range of Devices
Remotely connect and power a wide variety of power demanding devices with the
DPE-301GS. The DPE-301GS outputs up to 5VDC, 9VDC, or 12VDC, making it better able
to cope with the demands of multi-feature surveillance cameras, 802.11ac wireless access
point, network switches and security equipment.
Greater Deployment Flexibility
Network administrators can use the DPE-301GS to deploy wireless access points and
network cameras in hard-to-reach places such as entryways, rooftops, ceilings or any
other location not in close proximity to a power outlet. This means that administrators can
position network devices where they will be most eective, rather than having to settle for
less desirable locations due to the limited availability of power. Avoiding the need to use
unsightly extension cables, or the hassle and expense of installing new electrical wiring.
Reliable Connectivity
With built-in overcurrent protection and high eciency DC-DC converter, the DPE-301GS
oers output short-circuit protection to avoid damaging the connected device.
Features
Simplicity
• Plug-and-Play, so no software required
• Reduces installation and network equipment
costs by removing the need for electrical wiring
• Provides power over existing network cabling
when paired with a Power Source Equipment
(such as the DPE-301GI) to a non-PoE device
Flexible Power Options
• Separates a PoE Ethernet cable into DC power
and a standard Ethernet cable
• Supports 5 V, 9 V, and 12 V output voltages
• Transforms incoming AC power to low-voltage
DC power
Gigabit Connectivity
• Receives power up to 100 metres away1
• Connect your devices at Gigabit speeds
• Auto-negotiation on Ethernet port
Reliability
• IEEE 802.3at (PoE+) and IEEE 802.3af (PoE)
compliant
• Compatible with all standard PoE devices and
restricts power input to avoid damaging Power
Sourcing Equipment (PSE)
• Overcurrent protection
More Power with PoE+
Bring the benets of more powerful IEEE 802.3at
PoE+ to non-PoE devices with this compact and cost-
eective PoE solution
Flexible Deployment
Install non-PoE devices in locations where there are
no outlets without using extension cords or installing
electrical infrastructure
Easy to Setup
Install devices easily by simply setting the correct
output voltage (5 V, 9 V, or 12 V) and plugging in
Ethernet cables; no additional software is required
Product Highlights
DPE-301GS Gigabit PoE+ Splitter
Setup Example - Powered by PoE Switch
DPE-301GS
Splitter or
or
or
or
PoE Switch
Power & Ethernet
using PoE
Power & Ethernet
using PoE
Ethernet
Ethernet
5V/9V/12V DC Power Out
5V/9V/12V DC Power Out
Workstation
DPE-301GI
PoE Injector
Workstation
Router
Ethernet
Setup Example - Powered by PoE Injector2
Power In
Power
Power over Ethernet
Ethernet
DPE-301GS
Splitter
Other Non-PoE Network Device
Other Non-PoE Network Device
Non-PoE Camera
Non-PoE Camera
Non-PoE Access Point
Non-PoE Access Point
54 V DC Power
Adapter
DPE-301GS Gigabit PoE+ Splitter
D-Link European Headquarters. D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX.
Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners. ©2016 D-Link Corporation. All rights reserved. E&OE.
Updated May 2016
For more information: www.dlink.com
Technical Specications
Ports
PoE In Supports half/full-duplex operation•
• 10/100/1000BASE-T port
• IEEE 802.3 compliant
• IEEE 802.3u compliant
• IEEE 802.3ab compliant
• IEEE 802.3at compliant
• IEEE 802.3af compliant
LAN Out Supports half/full-duplex operation•
• 10/100/1000BASE-T port
• IEEE 802.3 compliant
• IEEE 802.3u compliant
• IEEE 802.3ab compliant
LED Indicator Green: Power On•
Physical
Dimensions (L x W x H) 109.8 x 62.2 x 24.5 mm (4.32 x 2.45 x 0.96 inches)•
Weight • 98 grams (3.46 ounces)
Power Output 5V DC up to 2.5A •
• 9V DC up to 2A
• 12V DC up to 2A
Included Power Adapter Cables 5.5 mm to 3.8 mm male to male 5.5 mm to 5.5 mm male to male• •
Temperature • • Operating: 0 to 60 °C (32 to 140 °F) Storage: -30 to 70 °C (-22 to 158 °F)
Humidity • • Operating: 5% to 95% non-condensing Storage: 5% to 95% non-condensing
Certifications • CE
• FCC
• VCCI
• RCM
• RoHS
1 Maximum distance as per 802.3u specications
2 DPE-301GI (PoE Injector) sold separately
Note: If the DPE-301GS is connected to outdoor devices, it is recommended to install a surge protector.
Especificaciones del producto
| Marca: | D-Link |
| Categoría: | Splitter |
| Modelo: | DPE-301GS |
¿Necesitas ayuda?
Si necesitas ayuda con D-Link DPE-301GS haz una pregunta a continuación y otros usuarios te responderán
Splitter D-Link Manuales
29 Septiembre 2024
Splitter Manuales
- Splitter Samsung
- Splitter Nedis
- Splitter ACG
- Splitter Manhattan
- Splitter Black Box
- Splitter Audio-Technica
- Splitter Sun Joe
- Splitter Tripp Lite
- Splitter IFM
- Splitter Fujitsu
- Splitter Scheppach
- Splitter Konig
- Splitter Zipper
- Splitter Newstar
- Splitter ATen
- Splitter StarTech.com
- Splitter SmartAVI
- Splitter Lindy
- Splitter AMX
Últimos Splitter Manuales
30 Septiembre 2024
29 Septiembre 2024
29 Septiembre 2024
27 Septiembre 2024
27 Septiembre 2024
24 Septiembre 2024
23 Septiembre 2024
21 Septiembre 2024
20 Septiembre 2024
19 Septiembre 2024