Da-Lite Parallax 29843 Manual de Usario

Da-Lite No categorizado Parallax 29843

Lee a continuación 📖 el manual en español para Da-Lite Parallax 29843 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
INSTRUCTION BOOK FOR
Parallax Screen
2
Tools Required for Installation
Included Hardware
Phillips Screwdriver Tape MeasurePencil
Large Wall Bracket (47" Long)
Installation screws not included
Quantities vary by screen size:
Screens 80" and smaller viewing width = 1
Screens over 80" to 96" viewing width = 2
Screens over 96" viewing width = 3
Small Wall Bracket (8" Long)
Installation screws not included
Quantity = 1. Only for screens 80" and smaller viewing width.
#8 Stud with Shoulder (8 each) Black Flat Head Screw (12) Elastic Ring
(1 Pack - Usage Varies by Screen Size)
Foam Sheet (1)
Gloves (2 pair)
Disclaimer
Milestone and its ailiated corporations and subsidiaries
(collectively "Milestone"), intend to make this manual accurate
and complete. However, Milestone makes no claim that the
information contained herein covers all details, conditions or
variations, nor does it provide for every possible contingency in
connection with the installation or use of this subject to change
without notice or obligation of any kind. Milestone makes no
representation of warranty, expressed or implied, regarding the
information contained herein. Milestone assumes no
responsibility for accuracy, completeness or suiciency of the
information contained in this document.
Da-Lite® is a registered trademark of Milestone AV Technologies.
All rights reserved.
3
Material Handling Guidelines
CAUTION: Handle screen surface with care. Ambient light rejecting screen surfaces are delicate
and should remain lat at all times.
Carefully and evenly unroll screen surface to ensure latness.
Do not fold, stretch or crease screen surface.
Do not allow objects to rest on screen surface.
Do not puncture screen surface.
Keep sharp objects away from screen surface.
Rear side of screen surface is sensitive to scratches, cuts, and
abrasions. Handle with care.
1. Unwrap the frame pieces. Assemble frame pieces on provided
foam sheet. This will help keep the frame clean and protect it
from scratches.
NOTE: The frame pieces are labeled top” and bottom”. Be
sure the frame pieces are assembled according to the labels.
This will ensure the attachment pattern on the frame and
screen surface will match.
Figure 1 (Rear View)
Frame Assembly
Cleaning
Parallax screen surface can be cleaned as follows:
Using a white clean cloth (100% cotton preferred) that is dampened with clean water, gently wipe the area in a horizontal direction. Do
not wipe in a vertical direction or with a circular motion. Using a dry 100% cotton cloth, wipe screen surface dry in horizontal direction
after each cleaning. Windex Original spray cleaner can be used on tough to clean areas.
Do not attempt to clean rear side of Parallax screen surfaces.
2. Slide the frame pieces together at corners.
NOTE: The frame assembly holes may not appear toit
properly at the corners until all fasteners have been attached.
Once fasteners are attached, the frame corners will be drawn
in for a proper it.
3. Secure frame pieces with black lat head screws provided. Do
not tighten screws until all are started. See Figure 1.
4. Attach the eight #8 studs to the back of the frame in the
predrilled holes.
Black Flat Head Screws
#8 Studs

Especificaciones del producto

Marca: Da-Lite
Categoría: No categorizado
Modelo: Parallax 29843

¿Necesitas ayuda?

Si necesitas ayuda con Da-Lite Parallax 29843 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Da-Lite Manuales

No categorizado Manuales

Últimos No categorizado Manuales