Dahua Technology X24A3L Manual de Usario
Dahua Technology
grabadora de voz
X24A3L
Lee a continuación 📖 el manual en español para Dahua Technology X24A3L (12 páginas) en la categoría grabadora de voz. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/12
16-Channel 1080p 1.5U HDCVI Digital Video Recorder
X24A3L
Quick Start Guide
V .0.1 ersion 1
Dahua Technology USA Inc.
Table of Contents
1 1 Welcome........................................................................................................................
1.1 Important Safeguards and Warnings ................................................................. 1
Electrical safety ................................................................................................. 1
Environmental Precautions ............................................................................... 2
Operation and Daily Maintenance ..................................................................... 2
Warnings ........................................................................................................... 2
1.2 FCC Information ................................................................................................ 3
FCC compliance: ............................................................................................ 3
1.3 Legal Notices .................................................................................................... 3
Copyright ........................................................................................................... 3
Trademarks ....................................................................................................... 3
1.4 Disclaimer ......................................................................................................... 3
2 4 Unpacking......................................................................................................................
3 DVR Components.......................................................................................................... 5
3.1 Front Panel 5.......................................................................................................
3.2 Rear Panel ........................................................................................................ 5
4 Installing the Hard Drive ................................................................................................ 6
5 DVR Setup..................................................................................................................... 8
5.1 Making Connections .......................................................................................... 8
5.2 Logging In ......................................................................................................... 8
6 Accessing the DVR via the Web.................................................................................... 9
1
1 Welcome
This manual offers reference material and general information about the basic operation,
maintenance, and troubleshooting of the Dahua . Read, follow, and HCDVI Digital Video Recorder
retain the following safety instructions. Heed all warning on the unit and in the operating instructions s
before operating the unit. Keep this for future reference. guide
1.1 Important Safeguards and Warnings
Electrical safety
• I nstall the unit in accordance with the manufacturer’s instructions and in accordance with
applicable local codes.
• All installation and operation conform to your local electrical safety codes. must
• Do not overload outlets and extension cords, which may cause fire or electrical shock.
• Do not place the camera near or in a place where the camera may contact overhead power lines,
power circuits, or electrical lights.
• Ensure power conforms to SELV (Safety Extra Low Voltage) and imited power source is that the l
rated IEC60950AC 24V as specified in -1. (Power supply requirement is subject to the device
label).
• All input/output ports are circuits. Ensure that SELV circuits are connected only to other SELV
SELV circuits.
• Ground the unit using the ground connection of the power supply to protect the unit from damage,
especially in damp environments.
• Protect the plug and power cord from foot traffic, being pinched, and its exit from the unit.
• Units with or without an ON/OFF switch have power supplied to the unit whenever the power
cord is inserted into the power source; however, the unit is operational only when the ON/OFF
switch is in the ON position. The power cord is the main power disconnect device for switching
off the voltage for all units.
• Operate the unit only from the type of power source indicated on the label. Before proceeding,
disconnect the power from the cable to be installed into the unit.
• For external power supplied units, use only the recommended or approved power supplies.
• Limited power sources must comply with EN 60950. Substitutions may damage the unit or
cause fire or shock.
• For 24 VAC units, voltage applied to the unit’s input power should not exceed ±25%. User-
supplied wiring must comply with local codes (Class 2 power levels). Do not ground the
supply at the terminals or at the unit’s power supply terminal.
• Contact the local dealer or the power company to verify the correct power supply.
• Do not attempt to service the unit. Opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified personnel.
• If the unit is damaged and requires service, unplug the unit from the main power supply and refer
to qualified service personnel. Damage may include, but is not limited to:
• The power supply cord or plug is damaged.
• Liquid has spilled in or on the unit.
• An object has fallen on the unit.
• The unit has been dropped and the housing is damaged.
• The unit displays a marked change in performance.
• The unit does not operate in the expected manner when the user correctly follows the proper
operating procedures.
• Ensure a service technician uses replacement parts specified by the manufacturer, or that have
the same characteristics as the original parts. Unauthorized parts may cause fire, electrical
shock, or other hazards. Dahua is not liable for any damage or harm caused by unauthorized
modifications or repairs.
• Perform safety checks after completion of service or repairs to the unit.
• Use attachments and accessories only specified by the manufacturer. Any change or
modification of the equipment, not expressly approved by Dahua, could void the warranty.
Especificaciones del producto
Marca: | Dahua Technology |
Categoría: | grabadora de voz |
Modelo: | X24A3L |
¿Necesitas ayuda?
Si necesitas ayuda con Dahua Technology X24A3L haz una pregunta a continuación y otros usuarios te responderán
grabadora de voz Dahua Technology Manuales
19 Octubre 2024
18 Octubre 2024
30 Septiembre 2024
27 Septiembre 2024
22 Septiembre 2024
20 Septiembre 2024
16 Septiembre 2024
14 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
grabadora de voz Manuales
- grabadora de voz Sony
- grabadora de voz Philips
- grabadora de voz Panasonic
- grabadora de voz Grundig
- grabadora de voz Motorola
- grabadora de voz Olympus
- grabadora de voz Toshiba
- grabadora de voz Abus
- grabadora de voz Aiwa
- grabadora de voz Hikvision
- grabadora de voz Nedis
- grabadora de voz Kodak
- grabadora de voz RCA
- grabadora de voz Roland
- grabadora de voz DataVideo
- grabadora de voz Sanyo
- grabadora de voz Marantz
- grabadora de voz Audioline
- grabadora de voz Audiovox
- grabadora de voz GeoVision
- grabadora de voz Goclever
- grabadora de voz Planet
- grabadora de voz Konig
- grabadora de voz Swann
- grabadora de voz Zoom
- grabadora de voz Humax
- grabadora de voz Saramonic
- grabadora de voz Line 6
- grabadora de voz Blackmagic Design
- grabadora de voz EverFocus
- grabadora de voz M-Audio
- grabadora de voz Provision ISR
- grabadora de voz Neo
- grabadora de voz Epcom
- grabadora de voz Sound Devices
- grabadora de voz HiLook
- grabadora de voz Jammin Pro
- grabadora de voz Mach Power
- grabadora de voz Qian
Últimos grabadora de voz Manuales
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
21 Octubre 2024
19 Octubre 2024
11 Octubre 2024
11 Octubre 2024
10 Octubre 2024
7 Octubre 2024
7 Octubre 2024