Dali Evidence Manual de Usario
Lee a continuación 📖 el manual en español para Dali Evidence (8 páginas) en la categoría Oradores. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/8
OWNERS MANUAL
THANK YOU FOR
CHOOSING DALI
We know you cant wait to hear your new DALI loudspeakers, so well save the more
technical stuff until later. That way, youll have something to read once your system is up
and running.
But first, unless you are experienced and confident in hi-fi matters, please take the time to
read at least the sections on CONNECTIONS and PLACEMENT, before wiring your new
DALI loudspeakers to your system.
It is the goal of this manual to assist you in obtaining the finest possible performance from
your new DALI loudspeakers. If additional assistance is required, always feel free to contact
your authorised DALI dealer.
STEREO AND SURROUND
CONNECTION
The loudspeaker carton indicates whether the
speaker inside is Left or Right or Centre. Position
them correctly.
Always turn your amplifier off before connecting
or disconnecting any cables. Always use equal
lengths of cable for the left and right speakers.
Cable should be connected between loudspeaker
and amplifier, red plus (+) terminal to red plus (+)
terminal and black minus (-) terminal to black mi-
nus (-) terminal. It is important that the connections
are made correctly and in phase. Incorrect, out-
of-phase connection will result in a diffuse stereo
image and weak bass.
Your DALI Evidence loudspeakers have two pairs
of terminals. If you do not choose to use bi-wiring
or bi-amping, make sure that the enclosed metal
straps are in place and tightened by hand, one
connecting red terminal to red terminal, the other
connecting black terminal to black terminal. For
normal use, connect only one terminal pair to the
amp as shown in (Fig. 1).
In a surround system, connect centre, front and
rear surround loudspeakers to the surround amp
as shown in (Fig. 2).
Fig. 1. Normal Stereo Connection
Fig. 2. Surround Connection
2
BI-WIRING AND BI-AMPING
We recommend bi-wiring or bi-amping for
improved sound quality.
To bi-wire or bi-amp, remove the metal straps
before going on to the next steps. The top termi-
nal pair on each speaker connects to the high
frequency crossover section and the bottom ter-
minal pair connects directly to the low frequency
crossover section.
To bi-wire (fig. 3), connect cable from one pair of
terminals on each speaker to the amplifiers out-
put terminals. Then, connect another cable from
the second pair of speaker terminals to the SAME
terminals on the amplifier.
To bi-amp (fig. 4), two identical stereo amplifiers
should be used. Connect cable from the bass
terminals of the left speaker to the left channel of
one of the amplifiers. Connect cable from the
bass terminals of the right speaker to the right
channel of the same amplifier.
Connect cable from the high frequency terminals
of the left speaker to the left channel of the second
amplifier. Then, connect cable from the high
frequency terminals of the right speaker to the
right channel of the second amplifier.
Bi-wiring offers improvements in the areas of
openness and reduces intermodulation distort-
ion. Bi-amping offers further improvements in
these areas with the added benefit of increased
dynamics.
Tighten all connections securely so that the cable
cannot slip out. Make certain that no loose
strands of wire are sticking out. Wire connected
to a terminal must never touch wire connected
to any other terminal.
3
Cable quality and design do make a difference. Buy the best cable you can reasonably
afford. In this simple way, you can raise the performance of your system to a higher level.
Especificaciones del producto
| Marca: | Dali |
| Categoría: | Oradores |
| Modelo: | Evidence |
¿Necesitas ayuda?
Si necesitas ayuda con Dali Evidence haz una pregunta a continuación y otros usuarios te responderán
Oradores Dali Manuales
5 Octubre 2024
5 Octubre 2024
22 Septiembre 2024
20 Septiembre 2024
20 Septiembre 2024
3 Septiembre 2024
26 Agosto 2024
21 Agosto 2024
4 Agosto 2024
28 Julio 2024
Oradores Manuales
- Oradores JBL
- Oradores Onkyo
- Oradores Pioneer
- Oradores Yamaha
- Oradores Albrecht
- Oradores Amazon
- Oradores Gembird
- Oradores Lenco
- Oradores Harman Kardon
- Oradores Telestar
- Oradores Denver
- Oradores Maginon
- Oradores Ion
- Oradores Auna
- Oradores Numark
- Oradores Magnat
- Oradores Technaxx
- Oradores Pure Acoustics
- Oradores Peaq
- Oradores Veho
- Oradores Beats
- Oradores IHome
- Oradores Skytec
- Oradores Stereoboomm
- Oradores Jamo
- Oradores Dymond
- Oradores XtremeMac
- Oradores Hammond
- Oradores Iluv
- Oradores Power Dynamics
- Oradores Maxell
- Oradores Noxon
- Oradores Quadral
- Oradores Reflexion
- Oradores Novero
- Oradores REL Acoustics
- Oradores Labtec
- Oradores Konig Electronic
- Oradores Deluxa
- Oradores Beoplay
- Oradores Ideen Welt
Últimos Oradores Manuales
19 Octubre 2024
18 Octubre 2024
18 Octubre 2024
16 Octubre 2024
16 Octubre 2024
5 Octubre 2024
5 Octubre 2024
23 Septiembre 2024
23 Septiembre 2024
15 Septiembre 2024