Dangerous Music CONVERT-8 Manual de Usario

Dangerous Music No categorizado CONVERT-8

Lee a continuación 📖 el manual en español para Dangerous Music CONVERT-8 (13 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/13
CONVERT-8®
USER GUIDE
SAFETY REVIEW
The Exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying this product
Certain precautions should be taken when using electrical products. Please observe the safety hints by reading the manual and obtaining qualified
help if necessary to adhere to the precautions.
1. Always use a properly grounded power supply cord with this product. Please do not defeat the ground pin on the mains plug. This connection
provides earth to the chassis and signal grounds inside the device for clean and quiet operation.
2. Avoid high temperature operation in equipment racks by providing air circulation. The number one killer of electronic gear is HEAT. Vented rack
panels may look like wasted space to an interior decorator, but they look like beauty to a technician or equipment designer! If the front panel is
hot, it is roasting inside the box.
3. Avoid areas of high magnetic fields. The steel chassis is designed to shield the circuits from EMI and RFI (magnetic and radio interference).
When installing equipment in racks, it is prudent to put power amplifiers and large power supplies at least several rack spaces, if not in a different
rack, away from equipment that deals with low level signals. Separation of high level and low level equipment can pre-empt trouble caused by
heat and EMI.
4. Care should be taken to avoid liquid spills around equipment. If a spill occurs, please shut off the gear and disconnect the mains. A qualified
technician should investigate accidents to prevent further equipment damage or personnel hazards caused by spills.
5. If one is uncomfortable with opening gear and changing jumpers or making adjustments, please seek qualified help if necessary.
6. If adjustments or jumper changes are required, please disconnect the mains plug before opening the top. Dropped screws or tools on a live
circuit board can manifest themselves as burn marks and smoked components. While we feel your pain, (been there) subsequent damage is not
covered by the warranty.
Dangerous Music Incorporated reserves the right to change the specifications or modify the designs of its equipment. Sending in the registration
card is our way of keeping in touch with users of our equipment should this become necessary. Registration information is always kept confidential
and never disclosed to third parties for any reason. Company contact information is on the last page of this manual.
!
!
!
!
!
!
!
The CE sign on this product signifies the fact that this product has been tested and verified to conform to the appli-
cable standards of 89/336/EEC.EN55103-1 (emissions) EN61000-2 (immunity) and EN60065:2002 (safety requirements)
This product uses components of the types and quantities that comply with the EC RoHS standard 2002/95/EC. A list
of suppliers and materials is available from DMI. We tightly control production to use top quality materials.
1 | | II
THANK YOU
Thank you for choosing products from the exciting and innovative line of Dangerous Music recording equipment. Many years of reliable
service can be expected from our gear. This is made possible through careful design, construction, and component choices by recording
industry veterans.
D/A Conversion has been an integral part of the Dangerous Music audio legacy since 2002, when the MONITOR® set the standard for
mastering engineers worldwide. Even with these golden-eared luminaries satisfied, Dangerous chose to raise the bar once again. There are
comprehensive tips and application notes in this user’s guide, so don’t skip the read.
If you have any suggestions for applications or future products, feel free to forward them. We are users like you.
ABOUT DANGEROUS MUSIC
“Audio Integrity: non-negotiable.” This is the credo upon which Dangerous Music is founded. Conceived and designed by end users—not
by engineers in lab coats- the results are products that resurrect dynamic range, punch, intelligibility and emotion. These high-fidelity,
uncompromising signal paths are achieved by harnessing several decades of real-world experience. Then the critical listening skills of top
tier engineers are applied, with the result being musical tools that fulfill the actual needs of today’s flexible computer based studio.

Especificaciones del producto

Marca: Dangerous Music
Categoría: No categorizado
Modelo: CONVERT-8

¿Necesitas ayuda?

Si necesitas ayuda con Dangerous Music CONVERT-8 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Dangerous Music Manuales

Dangerous Music

Dangerous Music CONVERT-8 Manual de Usario

15 Septiembre 2024
Dangerous Music

Dangerous Music CONVERT-AD+ Manual de Usario

15 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024