Datalogic 94A151107 Manual de Usario

Datalogic Cargador para dispositivo móvil 94A151107

Lee a continuación 📖 el manual en español para Datalogic 94A151107 (2 páginas) en la categoría Cargador para dispositivo móvil. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

ACCESSORIES

94A051013 WIN-NET VEHICLE POWER

CAB (CRADLE)

Cable containing an 8A slow-blow fuse for powering

the vehicle cradle from the car cigarette lighter.

94ACC1306 ADJUSTABLE ARM KIT FOR

VEHICLE CRADLE

positionable arm for mounting the cradle in the

vehicle.

TECHNICAL FEATURES

Kyman-NET™ Vehicle Cradle

Electrical Features

Power Supply from 10 to 32 VDC

Consumption (with mobile computer) Max. 1.8 A

Quiescent Consumption

(without mobile computer) Max. 5 mA

Indicators Power on LED (green)

Charge Time

(when mobile computer is off) Li-Ion Battery: max. 2.5 hours

Communication Features

Interface RS232

Baud Rate up to 115200 b/sec

Environmental Features

Working Temperature* -20° to +50 °C / -4° to +140 °F

Storage Temperature -20° to +70 °C / -4° to +158 °F

Humidity 90% non condensing

Degree of Protection IP20

Vibration Resistance EN60068-2-64 frequency range 5-1000 Hz; acceleration

RMS: 3.1 g; initial slope: 26dB/oct 5-10 Hz; final slope: -3dB/oct 10-1000 Hz

Shock Resistance EN60068-2-29 – ±25g, 6ms duration, 500 shock impacts per axis

Mechanical Features

Dimensions 118.5 x 321 x 104 mm / 4.66 x 12.63 x 4.09 in

Weight about 770 g / 27.16 oz

* Battery must be charged at a temperature ranging from 0° to +45 °C (+32° to +113 °F).

FCC COMPLIANCE

Modifications or changes to this equipment without the expressed written approval of Datalogic could void

the authority to use this equipment.

The device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference which may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are des protection against harmful igned to provide reasonable

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

822000692 (Rev. B)

Kyman-NET™ Vehicle Cradle

The Kyman-NET™ Vehicle Cradle allows charging the Kyman-NET™ mobile computer battery and

holding it securely in your vehicle. It also functions as a serial communication interface between a Host

(typically a Laptop PC) and the RS232 contacts on the mobile computer.

A) Microphone

B) Loudspeaker

C) Ext. Microphone/Headset Jack

D) LED Indicator

E) Mobile Computer Contacts

F) Mounting Holes

G) Adhesive Stylus Holder

H) Power Connector (Jack)

I) RS232 Connector

Figure 1 – Kyman-NET™ Vehicle Cradle

External microphone/headset jack, microphone and speaker allow managing a vocal communication (see

related paragraph on next page).

MOUNTING THE KYMAN-NET™ VEHICLE CRADLE

The Kyman-NET™ Vehicle Cradle can be mounted to the

desired surface using the 4 screws together with the 4 nuts.

Figure 2 – Mounting the Kyman-NET™ Vehicle Cradle

POWERING THE KYMAN-NET™ VEHICLE CRADLE

Once the cradle has been mounted, it is necessary to prepare the power cable termination to connect the

cradle to the vehicle power source.

− Brown wire: connect to a V+ (10 to 32 Vdc) vehicle power source;

− Blue wire: connect to the vehicle ground wire or chassis ground;

− Green/Yellow wire: not connected.

Figure 3 – Fuse Holder

For connection to the vehicle power source it is

possible to use the in-line fuse (with holder)

supplied with the cradle.

Verify that the a 8 A slow-blow fuse is contained

within the holder, then splice it to the end of the

brown wire of the cable. Make the distance

between fuse holder and power connection point as

short as possible and apply a caution label on the

fuse holder.

Once the power cable termination has been

completed, it is possible to connect the Kyman-

NET™ Vehicle Cradle to the vehicle power.

Figure 4 – Fuse Holder Connection

INSERTING THE KYMAN-NET™ INTO THE VEHICLE CRADLE

For correct functioning, first insert the

mobile computer into the cradle. Then,

push it towards the upper part of the cradle

until the retaining roller clicks.

When the cradle is powered, insert the

mobile computer and the green LED will

turn on. If the mobile computer is not

inserted, the LED remains off while the

cradle is still powered.

Click

Figure 5 – Inserting the Mobile Computer into the Kyman-NET™ Vehicle Cradle

EXTRACTING THE KYMAN-NET™ FROM THE VEHICLE CRADLE

To extract Kyman-NET™, push the clip o

the retaining roller up and extract the

mobile computer.

Figure 6 – Extracting the Mobile Computer from the Kyman-NET™ Vehicle Cradle

CONNECTION

The Kyman-NET™ Vehicle Cradle can be connected to a host by means of an RS232 interface.

RS232 Connection

The Kyman-NET™ Vehicle Cradle can be connected to the host by means of any standard null-modem

cable. A 9-pin female D-Sub connector must be connected to the RS232 port of the cradle. Once the host

has been turned on, insert the Kyman-NET™ mobile computer into the cradle.

Pin 9 of the Vehicle Cradle RS232 connector (normally not connected in null-modem cables), supplies

regulated +5 Vdc ± 5% 500 mA max power.

Figure 7 - RS232 Connection

Pinout

The Null Modem Cable allowing the RS232 connection has the following pinout:

DCD

RXD

TXD

DTR

GND

DSR

RTS

+5 V

CTS

RTS

4 6

5 5

Cradle side

9-pin D-sub

(

male

)

Host/PC side

9-pin D-sub

(

female

)

Figure 8 – Null Modem Cable Pinout

CONFIGURING KYMAN-NET™ MOBILE COMPUTER FOR VOCAL COMMUNICATION

By default vocal communication takes place through the Kyman-NET™ Mobile Computer integrated

loudspeaker and microphone. Once inserted into the vehicle cradle, the communication has to be

managed by the cradle itself. Thus, the mobile computer must be configured through the volume settings

applet available in the Windows CE .NET control panel to correctly manage the communication (refer to

the Kyman-NET™ User’s Manual for more details).

NOTE

Vocal Communication requires Kyman-NET™ Mobile Computer SW version 1.34

or later.

Fuse

Brown Wire

Host Computer

Standard Null-

Modem Cable

Kyman-NET™

Vehicle Cradle

To Vehicle Battery

Especificaciones del producto

Marca:	Datalogic
Categoría:	Cargador para dispositivo móvil
Modelo:	94A151107
Color del producto:	Black, Grey
Ancho:	917 mm
Profundidad:	640 mm
Altura:	1394 mm
Amable:	Multimediawagentje
Ajustable en altura:	300 mm
Número de estantes:	0 schappen
Interfaz de montaje en panel:	100 x 100 mm
Número-de-cajones:	0 lade(n)
Uso recomendado:	Vlakke paneel
Tamaño máximo de pantalla:	55 "
Tamaño mínimo de pantalla:	30 "
Teclado cargado:	Nee