Deaf Bonce Avatar SVL-1547 D1/D2 Manual de Usario

Deaf Bonce Altavoz de subgraves Avatar SVL-1547 D1/D2

Lee a continuación 📖 el manual en español para Deaf Bonce Avatar SVL-1547 D1/D2 (20 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/20
SUBWOOFER
http://alphard.audio
SVL-1547 D1/D2 SVL-1847 D1/D2 VOLCANO SERIES
2
EN
competi torsapproved by
C O N T E N T S
1. Introduction.
2. Safety instructions.
3. Wiring diagrams.
4. Recommended enclosure parameters.
5. How to use.
6. Specifications.
7. Dimensions.
8. Box contents.
9. Warranty and maintenance info.
10. Information on disposal of the electrical and electronic equipment
(for the European countries with separate waste collection).
3
1 . IN T R O D UC T I O N
2 . S A F E T Y I NS T R U C T I O N S
3 . WI R I N G D I A G R A M S
C o nne c ti o n of t e rm i na l s
EN
Attention! You need to connect both voice coils of the subwoofer.
Do not expose your amplifier to loads below the value predetermined by the manufacturer.
Various examples of connection types are given at the pages below. Use these examples to determine the required load
impedance of your connection.
To t a l i m p e d a n c e = S u b 1 + S u b 2 + S u b 3 . . . ΩΩΩ
Se r i a l c on n ec t i o n
Thank you for purchasing th is Avatar product of Volcano series ! Our company is committed to the creation of extremely loud
systems with no loss of quality
To ensure proper use, please read through this manual before using this product. It is especially important that you carefully
read and observe caution’s in this manual. Please keep the manual in a safe and accessible place for future reference.
1. Fasten the subwoofer properly when installing it in the vehicle. If the component is disconnected during driving, it may
cause serious damage to the passengers of the vehicle or another vehicle.
2. Before installing the components, if possible store the product in its original package to avoid accidental damage to the
product.
3. Be careful when installing and dismantling the subwoofer! Do not let the subwoofer drop to avoid damage of its moving
parts.
4. When working with tools follow safety rules.
5. Before the installation switch off the head unit and all other audio devices to avoid their damage.
6. Make sure that the location of the subwoofer does not hinder the proper operation of mechanical and electrical devices of
the vehicle.
7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt.
ATTENTION!!! The product may be operated at +5 °C (41F) to +40 °C (104F). In case of moisture condensation, let the product to
dry.8. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel pipe or
other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.
9. When stretching back the speaker cables make sure that they are not in contact with sharp edges or moving mechanical
devices. Make sure that they are firmly fixed and protected over the entire length.
10. The diameter of the speaker cables must be selected in accordance with the length and applied power.
11. Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the
insulating layer, short circuit and fire.
12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies
close to the parts exposed to heat.
CAUTION!!! High sound pressure can damage your health!
Please use the common sense when controlling volume!

Especificaciones del producto

Marca: Deaf Bonce
Categoría: Altavoz de subgraves
Modelo: Avatar SVL-1547 D1/D2

¿Necesitas ayuda?

Si necesitas ayuda con Deaf Bonce Avatar SVL-1547 D1/D2 haz una pregunta a continuación y otros usuarios te responderán




Altavoz de subgraves Deaf Bonce Manuales

Altavoz de subgraves Manuales

Últimos Altavoz de subgraves Manuales