Definitive Technology Mythos SSA-42 Manual de Usario

Definitive Technology Vocero Mythos SSA-42

Lee a continuación 📖 el manual en español para Definitive Technology Mythos SSA-42 (4 páginas) en la categoría Vocero. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
Unpacking Your SSA Speakers
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred in handling after it left our plant and should be reported
at once to your Definitive dealer or the delivery company that delivered your loud-
speaker. Please unpack your system carefully. Save all cartons and packing materials in
case you move or need to ship your system. Recor the serial number found on thed
back of the Mythos SSA in the appropriate place on the product registration card,
answer all questions and send it in.
VERY IMPORTANT: Accessories
Various parts and accessories that you will need to use your Mythos SSA are in the
carton but are easy to overlook. Open both ends of the shipping carton. Carefully
examine the contents of the shipping carton and packing material to find the plastic
bags with accessories.
Specifications
SSA-42
Dimensions: 403/8" W (107.6 cm) x 41/8" D (10.48 cm) x 41/2" H (11.4 cm)
(speaker only, not including bracket)
Driver Complement: Three 31/4" (8.3 cm) BDSS High-output drivers with coincident
array 3/4" (20 mm) ferro-magnetic fluid damped pure aluminum
dome tweeter.
Two 31/4" (8.3 cm) BDSS High-output full-range drivers.
Four 3" full-range high-output surround drivers(7.6 cm)
with butyl rubber surrounds.
Frequency Response: 60 Hz – 30 kHz
Nominal Impedance: 8 Ohms
Rec. Assoc. Amplification: 20 – 175 Watts/channel
Sensitivity: 89 dB
Weight: 20 lbs. (4.52 kG)
Specifications subject to change without notice.
Definitive Technology
SSA-42
OWNER’S MANUAL
Mythos Solo Surround Array Loudspeakers
Thank You
Thank you for choosing the Definitive Technology Mythos Solo Surround Array
Loudspeaker System featuring Spatial Array™ technology. The Mythos SSA-42 is a
unique speaker that provides a stunning 5-channel surround experience from just one
speaker. This extraordinary speaker makes enjoying a high performance surround audio
system mor convenient than ever before. You chose wisely.e
Our engineers spent many years developing this product. In order to ensure that you
experience the finest performance possible, we encourage you to take a moment to fully
read this owner’s manual and familiarize yourself with the proper installation and set-up
procedures for your Mythos SSA-42 speaker.
Definitive Technology
SSA-42
OWNER’S MANUAL
5. Use a bubble level to make sur the template is level. If the e
TV is wall mounted and not level, the speaker will look better
if it is off-level in exactly the same way as the TV.
6. Use push pins to secure the template to the wall.
7. Mark the location of pilot holes noted on the Mounting
Template with a pencil; remove the template.
8. Pre-drill the pilot hole locations for mounting screws
(not included). Use screws rated to hold securely in the
wall material (we recommend #10 screws).
9. It is best if at least one screw hits a wall stud. If there is no
stud behind the pilot hole location, install wall anchors (not
included) to secure the bracket screws. Follow the wall anchor
manufacturer’s directions. Each wall anchor should be rated
to hold at least one-half of the product net weight
[see specifications on front cover].
10. For masonr walls, use a masonry drill bit to pre-drill holes, y
and use masonry anchors and screws (not included).
11. Pull the five sets of speaker wires through the hole in the bracket.
12. Screw the bracket to the wall.
Wall Mounting the SSA
• We recommend that the SSA speaker be wall mounted
by professional installers or by those appropriately skilled in the
use of power tools and who have knowledge of building codes
and structural issues.
• We recommend that you determine a suitable location for
your speaker installation, and that you complete all wiring
(especially “hidden” in-wall wiring) before mounting the
bracket to your wall.
• Mythos Brackets are not suitable for ceiling mounting.
The Mythos Solo Surround Array loudspeaker comes with a wall
mounting bracket and template that makes secure mounting a breeze.
Follow these directions for installing the wall mounting bracket.
1. Two 1
⁄4"–20 screws have been factory installed on the back of the
speaker. Gently hand-tur the screws to make sur they ar in asn e e
far as they can go. Do not force them beyond the “stop” point.
The screws cannot screw all the way into the speaker and should
protrude as shown in the illustration.
2. Make sure the location you have selected for wall-mounting
does not conceal behind-wall electrical wiring or plumbing.
3. Hold the cardboard template (included) in the intended
location. Make sur the speaker clears the ceiling, adjacent e
walls, corners, beams, lighting fixtures and door/window
frames. Leave at least 11/2
" (38 mm) above the speaker location
to allow the speaker to slide down onto the bracket.
4. Make sure the center of the template is perfectly centered with
the TV screen.
Positioning the SSA
The SSA speaker may be mounted on
the wall above or below the video screen.
It may be placed on a table or shelf
in front of the TV.
If placed on a shelf under a TV, adjust the
leveling feet (screwed all the way in) to
aim the speaker up towards the listeners.
The SSA speaker may be placed directly
on top of TVs that have at least 5-inches
(13 cm) of flat surface on top. Do not
place the SSA speaker on top of any
surface that is not large or stable enough
to securely support the speaker. If the
speaker seems at all unstable or “tipsy”
place the speaker somewhere else. The
warranty does not cover damage
caused by falls due to improper
positioning of the speaker. If the
speaker is above seated listener height,
extend the leveling feet to point the
speaker downward [See Using the Leveling
Feet on page 3].
BACK OF SPEAKER
TOP OF SPEAKER
1
/ " –
4
20 SCREWS
THRE NSERTSADED I
+S URR OUN D RIGHT – + FRON T GHT – + CENT ER – + FR ONT LEF T – + SU RROU ND LEF T –RI
2
PILOT SLOTS
Even if you intend to place the SSA speaker on a TV or shelf you must attach the wall-mount bracket to the speaker. See Using the Leveling Feet on page 3.
13. When the wall mounting bracket is securely screwed to the wall, line
up the speaker’s protruding Mounting Screws with the keyhole slots
on the wall mounting bracket. Let the speaker slide straight down,
allowing the screw heads to slip behind the smaller end of the keyhole
slots. Gently push the bottom front edge of the speaker toward the wall
until the speaker snaps onto the lower lip of the bracket.
Mounting the SSA to an articulating TV bracket
If you have a Plasma or LCD TV that is attached to the wall via a
swing-out articulating bracket such as those offered by Chief, Sanus
and OmniMount, the SSA speaker may be attached to the bracket
without using the SSA wall-mount plate. Simply use 1
⁄4"–20 screws to
attach the SSA speaker directly to the TV bracket. Consult the TV
bracket manufacturer’s user manual for mor specific speaker e
mounting instructions.
Using the Leveling Feet
If you are going to use the speaker on a TV, shelf or table, first attach
the wall-bracket to the speaker as described above. Attach the two "L"
brackets to the wall-bracket using two M4 x 10 mm screws provided.
Thread the foot screws into the two "L" brackets and adjust to the
required height.
Connecting the SSA
Your Mythos SSA has one pair of 5-way binding posts for
each channel — Left Front, Right Front, Center, Left Surround
and Right Surround.
To start, strip 1/2" (3 mm) of insulation from
each speaker wir to expose the bare metal e
wire and twist each of the individual
conductors into single un-frayed strands.
Note that one of the terminals for each channel
is marked with red band (+) and the other is
marked with black band (–). Make certain that
you connect the wir om the red (+) tere fr minal
of your amplifier or receiver to the red (+) termi-
nal on your speaker and the wire from the black
(–) terminal of your amplifier or receiver to the
black (–) terminal on your speaker. Most speaker
wire has some indicator (such as color-coding, ribbing or writing)
on one of the two conductors to help you maintain consistency. It is
essential to connect all channels of the speaker to the amplifier in the
same way (in phase). If you experience a poor surround effect, it is
likely that one or more of the channels is connected in incorrect
polarity and needs to be rewired. Pay close attention and connect
positive to positive; negative to negative on all channels.
If you have a 6.1 or 7.1 channel receiver, connect the SSA’s surround
channel inputs to the “Surround” outputs of your receiver, not the “Rear”
or “Surround Back” outputs.
To connect wire to the binding post [see figure above], unscrew the knurled
nut and inser the bar wire into the hole near the base of the bindingt e
post. Do not insert the insulated part of the wire into the hole as this will
not give you a good connection. Twist the nut back down the binding post
until it firmly meets the wire. Do not over tighten.
Connect a single RCA cable from the “SUB OUT” of your receiver to
the LFE input of the subwoofer (not included). This connecting method
bypasses the subwoofer’s internal “crossover” or low pass filter and relies
on the crossover filter built into your receiver. NOTE: Make no other
signal connections. Do not use speaker wir to make the connection to e
the subwoofer
SSA-42
OWNER’S MANUAL
+ SURROUND RIGHT – + FRONT RIGHT – + CENTER – + FRONT LEFT – + SURROUND LEFT –
SSA-42
SUBWOOFER
95
15 040
Va ria b le
Low Pa ss Crossov er
120 V 80Hz T 3.2A L 250 V
Auto ma tic
Pow e r
O FFN/O
P r o C i n e m a
S u b w o f e ro
A c t i ve C r o s o v e rs
a n d P o w e r A m p l i f ie r
High Le vel
+
+
–
–
Lef t Right
®
LFE
IN
In
Out
RECEIVER
AUDIO
AUDIO
MULTI INPUT
SUBWOOFER
(LFE)
OUTPUT
COMPONENT VIDEO
FRON LEFT FRON IGHT SURROUND RIGHTT T R
CENTER
SURROUND LEFT
IMPEDAN ELECTORCE S
VIDEO
+–+–+
+
–
–
+–
SPEAKERS
FRONT
RIGHT
+
–
L LEFT RIGHT EFT
CENTER SU U DRRO N
RIGHT FTLE
SU C /RR. BA K REAR
FT
R
RIG
S
3

Especificaciones del producto

Marca: Definitive Technology
Categoría: Vocero
Modelo: Mythos SSA-42

¿Necesitas ayuda?

Si necesitas ayuda con Definitive Technology Mythos SSA-42 haz una pregunta a continuación y otros usuarios te responderán


Vocero Definitive Technology Manuales

Definitive Technology

Definitive Technology Dymension DW-45 MAX Manual de Usario

18 Septiembre 2024
Definitive Technology

Definitive Technology Dymension DW-65 MAX Manual de Usario

18 Septiembre 2024
Definitive Technology

Definitive Technology Dymension DW-65 PRO Manual de Usario

18 Septiembre 2024
Definitive Technology

Definitive Technology Dymension DC-80 MAX SUR Manual de Usario

18 Septiembre 2024
Definitive Technology

Definitive Technology Mythos LCR-75 Manual de Usario

17 Septiembre 2024
Definitive Technology

Definitive Technology Mythos LCR-85 Manual de Usario

17 Septiembre 2024
Definitive Technology

Definitive Technology Mythos LCR-65 Manual de Usario

15 Septiembre 2024
Definitive Technology

Definitive Technology Mythos ST Manual de Usario

13 Septiembre 2024
Definitive Technology

Definitive Technology C/L/R 3000 Manual de Usario

28 Agosto 2024
Definitive Technology

Definitive Technology Mythos ST-L SuperTower Manual de Usario

28 Agosto 2024

Vocero Manuales

Últimos Vocero Manuales

Continental Edison

Continental Edison CELED53HP20V2B4 Manual de Usario

27 Octubre 2024
Canton

Canton Vento 830.2 Manual de Usario

27 Octubre 2024
Jamo

Jamo S7-25C Manual de Usario

27 Octubre 2024
Bowers Wilkins

Bowers Wilkins 707 S2 Manual de Usario

27 Octubre 2024
Monacor

Monacor GLS-301/GR Manual de Usario

27 Octubre 2024
Monitor Audio

Monitor Audio Silver C150 Manual de Usario

26 Octubre 2024
FBT

FBT MITUS 210M Manual de Usario

26 Octubre 2024
CyberData Systems

CyberData Systems SIP 011398 Manual de Usario

26 Octubre 2024
Lamax

Lamax PartyGo1 Play Manual de Usario

26 Octubre 2024
IKEA

IKEA SYMFONISK 405.847.50 Manual de Usario

26 Octubre 2024