Definitive Technology Mythos XTR-50 Manual de Usario
Definitive Technology
Altavoces
Mythos XTR-50
Lee a continuación 📖 el manual en español para Definitive Technology Mythos XTR-50 (2 páginas) en la categoría Altavoces. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Unpacking Your Mythos XTR-50 Speakers
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred in handling after it left our plant and should be reported
at once to your Definitive dealer or the delivery company that delivered your loud-
speaker.Please unpack your speaker carefully.Save all cartons and packing materials in
case you move or need to ship your speaker. Record the serial number found on the
back of the Mythos XTR-50 on this manual.
VERY IMPORTANT: Accessories
Various parts and accessories that you will need to use your Mythos XTR-50 are in
the carton but areeasy to overlook. Open both ends of the shipping carton. Carefully
examine the contents of the shipping carton and packing material to find the plastic
bags with accessories.
Specifications
Mythos XTR-50
Driver complement: 2 each 3-1⁄2" (90mm) XTDD dome mid/bass drivers pressure-coupled
to 4 each 3-1⁄2" (90mm) dome low-bass radiators, 1 each 1" (25mm)
Pure Aluminum Dome Tweeter
Frequency response:(overall on wall) 92Hz – 30kHz; (+/- 3dB on wall) 120Hz – 20kHz
Sensitivity: 92dB
Impedance: 8 Ohms nominal
Dimensions: (mounted on wall without bracket) 27" H x 6" W x 1-1⁄2" D
(686mm x 152mm x 38mm)
Dimensions: (mounted on wall with bracket) 27" H x 6" W x 1-9⁄16" D
(686mm x 152mm x 40mm)
Dimensions: (on table stand) 30" H (762mm)
Table-stand base dimensions: 8-11/16" W x 4-3/4" D (222mm x 136mm)
Product Weight: 5.1 lbs. (2.3kg)
Specifications subject to change without notice.
Notes:
This product complies with the essential requirements
of the EMC directive 89/336/EEC.
FJAT12102009
MYTHOS XTR-50
OWNER’S MANUAL
Definitive Technology
For more information on Definitive Technology Loudspeakers and accessories,
visit www.definitivetech.com, or email info@definitivetech.com.
Definitive Technology, Owings Mills, Maryland, USA. 800-228-7148
4
MYTHOS XTR-50
®
OWNER’S MANUAL
Mythos XTR-50 Loudspeakers
Thank You
Thank you for choosing the Definitive Technology Mythos XTR-50 Loudspeaker
System. Our engineers spent many years developing this product. In order to ensure
that you experience the finest performance possible, we encourage you to take a
moment to fully read this owner’s manual and familiarize yourself with the proper
installation and set-up procedures for your Mythos XTR-50 speakers.
DEI Sales Co., dba Definitive Technology (herein “Definitive”) warrants to the original retail pur-
chaser onlythat this Definitiveloudspeakerproduct (the “Product”) will be free from defects in materi-
aland workmanship for a period of five (5) years covering the drivers and cabinets, and three (3) years
for the electronic components from the date of the original purchase from a Definitive Authorized
Dealer.If the Product is defectivein material or workmanship, Definitiveor its Authorized Dealer will,
at its option, repair or replace the warranted product at no additional charge, except as set forth below.
All replaced parts and Product(s) become the property of Definitive. Product that is repaired or
replaced under this warranty will be returned to you, within a reasonable time, freight collect. This
warranty is non-transferrable and is automatically void if the original purchaser sells or otherwise
transfers the Product to any other party.
This Warranty does not include service or parts to repair damage caused by accident, misuse, abuse,
negligence, inadequate packing or shipping procedures, commercial use, voltage in excess of the rated
maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defects in material
or workmanship. This warranty does not cover the elimination of externally generated static or noise,
or the correction of antenna problems or weak reception. This warranty does not cover labor costs or
damageto the Product caused by installation or removal of the Product. Definitive Technology makes
no warranty with respect to its products purchased from dealers or outlets other than Definitive
Technology Authorized Dealer.
THE WARRANTY IS AUTOMATICALLY VOID IF:
1) The product has been damaged, altered in any way, mishandled during transportation, or tampered with.
2) The product is damaged due to accident, fire, flood, unreasonable use, misuse, abuse, customer
applied cleaners, failure to observe manufacturers warnings, neglect or related events.
3) Repair or modification of the Product has not been made or authorized by Definitive Technology.
4) The product has been improperly installed or used.
Product must be returned (insured and prepaid), together with the original dated proof of purchase to
the Authorized Dealer from whom the Product was purchased, or to the nearest Definitive factory
service center. Product must be shipped in the original shipping container or its equivalent. Definitive
is not responsible or liable for loss or damage to Product in transit.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY THAT APPLIES TO YOUR
PRODUCT. DEFINITIVE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY
TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH
Y
OUR PRODUCT OR THIS WARRANTY. ALL OTHER WARRANTIES, INCLUDING BUT NOT
LIMITED TO EXPRESS, IMPLIED,WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A P
ARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED TO THE
MAXIMUM EXTENT ALLOWED BY LAW. ALL IMPLIED WARRANTIES ON PRODUCT ARE
LIMITED TO THE DURATION OF THIS EXPRESSED WARRANTY. DEFINITIVE HAS NO
LIABILITY FOR ACTS OF THIRD PARTIES. DEFINITIVE’S LIABILITY, WHETHER BASED
ON CONTRACT, TORT, STRICT LIABILITY, OR ANY OTHER THEORY, SHALL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT FOR WHICH A CLAIM HAS BEEN
MADE. UNDER NO CIRCUMSTANCE WILL DEFINITIVE BEAR ANY LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. THE CONSUMER AGREES AND
CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND DEFINITIVE SHALL
BE RESOL
VED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY,
CALIFORNIA. DEFINITIVE RESERVES THE RIGHT TO MODIFY THIS WARRANTY STATE-
MENT A
TANY TIME.
Some states do not allowthe exclusion or limitation of consequential or incidental damages, or implied
warranties, so the above limitations may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Limited Warranty: 5-Years for Drivers and Cabinets,
3-Years for Electronic Components
Mythos XTR-50 can be mounted either vertically as main or surround
speakers or horizontally for use as a center channel speaker. The logo
badge is not pre-attached to the
grille and is packaged in a plastic
bag along with the other
accessories. It should be affixed
in the correct place on the grille
once you have determined the
speaker’salignment. For horizontal
(center channel) use, align the badge
with the location on the long side of the
grille; for vertical use, align the badge with the
location on the short side of the grille. [Figure 11] To affix
the logo badge, gently press the logo badge into the recess
on the grill. A magnet will hold the logo in place. Do not press
the badge too hard or you may crack the grille.
Receiver/Speaker Set-up
Access your receiver’s “Speaker Set-up” or “Speaker Configuration” Menu.
1. In the Speaker Set-up/Configure function of your receiver, set all
channels that areconnected to Mythos XTR-50s to “Small.”
2. Select “Yes” when asked if you areusing a subwoofer.
3. Set the subwoofer crossover
frequency on the receiver to
120 Hz if the speaker is mounted
on a wall and 150 Hz if the
speakers aresitting on a shelf.
Service
Service and warranty work on your Definitive loudspeakers will normally
be performed by your Definitive Technology dealer or importer. If, however,
you wish to return the speaker to us, please contact us first, describing the
problem and requesting authorization as well as the location of the nearest
factory service center. Please note that the address given in this
booklet is the address of our offices only. Under no circumstances
should loudspeakers be shipped to our offices or returned
without contacting us first and obtaining return authorization.
Definitive Technology Offices
11433 Cronridge Drive, Owings Mills, Maryland 21117
Phone: (800) 228-7148 (US & Canada),
01 (410) 363-7148 (all other countries)
Technical Assistance
If you have any questions regarding your Mythos XTR-50 or its set-up,
please contact your Definitive Technology dealer or importer. If your
dealer or importer is unable to help you, please contact us directly at
(800) 228-7148 (US & Canada), 01 (410) 363-7148 (all other countries)
or e-mail info@definitivetech.com.
Attaching the Logo Badge
Figure 9
Figure 10
Figure 11
©2009 DEI Sales Co. All rights reserved.
Definitive Technology
Connecting the Mythos XTR-50
The wire connection method used on the Mythos XTR-50 is
different than most speakers so please read these instructions!
(NOTE: if you are using the table stands, you should pass the wire through
the wire channels before attaching the green speaker wire connector.)
1. In the accessories plastic bag you will find a small green plastic
connector as shown in Figure 1.
2. Strip 1⁄2 inch (12 mm) of insulation from each conductor of the
speaker wire to expose the bare metal and twist each of the
individual conductors into single un-frayed strands.
3. Use a small jewelers screwdriver to loosen the screws on the
connector just enough to allow the wire ends to fit in
the holes. [Figure 1]
4. Slip the wire ends into the holes and tighten the screws until the
wire is firmly attached to the connector. (NOTE: if you are using
the table stands, you should pass the wire through the wire
channels before attaching the wire connector.)
Note that one of the terminals is marked
with “+” and the other is marked with “-“.
Make certain that you connect the wire
from the red (+) terminal of your amplifier
or receiver to the “+” terminal on your
speaker and the wire from the black (-)
terminal of your amplifier or receiver to the
“-“ terminal on your speaker. Most speaker
wirehas some indicator (such as color-
coding, ribbing or writing) on one of the
two conductors to help you maintain
consistency. It is essential to connect both
speakers to the amplifier in the same way
(in phase). If you experience a lack of bass
or poor surround effect, it is likely that one
or more of the channels is connected in
incorrect polarity and needs to be rewired.
Pay closer attention to connect
positive to positive and negative to
negative on all channels.
5. Gently push the male
connector with the wireinto
the female receptacle on the
speaker. The connector is
designed so that it can
only go in one way with the
correct orientation of positive
and negative pins. [Figure 2]
6. Connect a single RCA cable from the “SUB OUT” of your receiver
to the LFE input of the subwoofer (not included). [Figure 3] This
connecting method bypasses the subwoofer’sinternal “crossover”
or low pass filter and relies on the crossover filter built into
your receiver.
7. See page 4 for instructions on Speaker Set Up in your
surround receiver.
MYTHOS XTR-50
OWNER’S MANUAL
2 3
Wall Mounting the Mythos XTR-50
•We recommend that wall-mounting of speakers be performed by
professional installers or by those skilled in the use of power tools
and the knowledge of building codes and structural issues.
•We recommend that you determine a suitable location for your
speaker installation, and that you complete all wiring (especially
“hidden” in-wall wiring) before mounting the brackets to your walls.
•Mythos wall-mount brackets are not suitable for ceiling mounting.
The Mythos XTR-50 loudspeaker comes with a wall-mounting
bracket that can make mounting easier but in most cases the
bracket is not necessaryto wall-mount the speaker.The supplied
bracket may be necessary when mounting the speaker to a full-
motion or tilting TV wall-mount. You may choose to use the
supplied wall-mount bracket if you want the speaker to protrude a
bit more from the wall (total depth without the bracket is 1.5 inches
[38mm] and 1.6 inches [40mm] with the bracket). The bracket is
padded with foam that may be useful for damping rattles or
vibrations between speaker and wall surface.
Follow these directions for wall mounting the speaker without
using the bracket.
1. The supplied cardboard mounting template is double-sided; one
side is for horizontal orientation and the other is for vertical
mounting. Be sure to face the correct side toward you. Hold the
cardboard template in the intended location. Make sure
the speaker clears the ceiling, adjacent walls, corners, beams,
lighting fixtures and door/window frames. Leave at least 1" (25 mm)
above or to the side of the speaker location to allow the speaker to
slide onto the screws.
2. Make sure the center of the template is centered with the TV
screen’s center points.
3. When mounting the speaker horizontally,use a bubble level to
make sure the template is level.
4.
When mounting the speaker vertically, use a plumb line to find
perfect vertical. If the TV is off-level or off-plumb, the speaker will
look better if it is off-level or plumb in exactly the same way as the TV.
5. Use push pins to securethe template to the wall.
6. Make pencil marks in the holes labeled “Pilot Hole (for mounting
without bracket)”; remove the template.
If you intend to place the Mythos XTR-50 on a TV or shelf
in a horizontal orientation, see page 3.
7. Pre-drill the pilot-hole locations for mounting screws (not included).
Use screws rated to hold securely in the wall material and have
screw heads (flat or panhead are acceptable) at least 0.33 inch
(8.5mm) in diameter.
8. It is best if at least one screw hits a wall stud.
If there is no stud behind the pilot-hole
location, install wall anchors (not included)
to secure the bracket screws. [Figure 5] Follow
the wall anchor manufacturer’s directions.
Each wall anchor should be rated to hold at
least one half of the product net weight
[see specifications on page 1].
9. For masonry walls, use a masonry drill bit to
pre-drill holes, and use masonry anchors and
screws (not included).
10. Drive in the screws until the head is approxi-
mately 0.12 inch (3mm) away from the wall.
If the screws are driven too close to the wall,
you will not be able to slip the speaker onto
the screw heads. If the screws are not close
enough to the wall, the speaker will be loose
and may rattle when played.
11. Push the speaker connector into the female receptacle on the back
of the speaker (see page 2).
12. Line up the speaker so that the screws enter the center part of the
+shaped channels; slide the speaker down so that the screw heads
hold the speaker in place. [Figure 4]
13. Gently pull on the speaker to make sure the screws are firmly
holding the speaker.
14. If the speaker is not held tightly to the wall, drive the screws in a
little deeper and try again.
Follow these directions for installing the speaker with the wall-
mounting bracket.
1. The supplied cardboard mounting template is double-sided; one
side is for horizontal orientation and the other is for vertical
mounting. Be sure to face the correct side toward you. Hold the
cardboard template in the intended location. Make sure
the speaker clears the ceiling, adjacent walls, corners, beams,
lighting fixtures and door/window frames. Leave at least 1" (25 mm)
above or to the side of the speaker location to allow the speaker to
slide onto the screws.
2. Make sure the center of the
template is centered with the TV
screen’s center points.
3. When mounting the speaker
horizontally, use a bubble level to
make surethe template is level.
4.
When mounting the speaker vertically, use a plumb line to find
perfect vertical. If the TV is off-level or off-plumb, the speaker will
look better if it is off-level or plumb in exactly the same way as the TV.
5. Use push pins to secure the template to the wall.
6. Make pencil marks in the holes labeled “Pilot Hole”;
remove the template.
7. Pre-drill the pilot-hole locations for mounting screws (not included).
Use flat head screws rated to hold securely in the wall material and
have screws heads between 0.25 inch (6.4mm) and 0.33 inch
(8.4mm) in diameter.
8. It is best if at least one screw hits a wall stud. If
there is no stud behind the pilot-hole location,
install wall anchors (not included) to secure the
bracket screws. [Figure 5] Follow the wall anchor
manufacturer’s directions. Each wall anchor should
be rated to hold at least one half of the product net
weight [see specifications on page 1].
9. For masonry walls, use a masonry drill bit to
pre-drill holes, and use masonry anchors and
screws (not included).
10. Secure the bracket to the wall with screws driven
into the pilot holes or wall anchors. Bracket should
be tight to the wall, and screw heads should be
flush with the bracket.
11. Attach the supplied male connector to the speaker
wireand plug the connector into the receptacle on
the speaker (see page 2).
12. Line up the speaker so that the mounting heads enter the center
part of the + shaped channels; slide the speaker down so that the
mounting heads hold the speaker in place. [Figure6]
13. Gently pull on the speaker to make sure the screws are firmly
holding the speaker.
Mounting the Mythos XTR-50 to an
articulating TV bracket
If you have a Plasma or LCD TV that is attached to the wall via a
swing-out articulating bracket such as those offered by Chief and
Sanus, consult the TV bracket manufacturer’s user manual for
specific speaker mounting instructions.
Shelf/Table Mounting
If you are going to use the Mythos XTR-50 in horizontal mode on a
shelf or table, first attach the two supplied
rubber pads to the bottom edge of the speaker.
[Figure 7] Assemble the L-brackets to the
threaded holes in the back of the speaker using
the 1/4 20 x 12mm long screws provided.
[Figure8] Thread the foot screws into “L”
brackets and adjust to tilt the speaker up or down to aim
the speaker toward seated listener ear height.
If you aregoing to vertically mount the speaker on
a shelf or table, do not attach the wall mount
bracket to the speaker. Follow these steps:
1. Assemble the shelf stand using [Figure 9] as a guide.
2. Pass the speaker wire through the wire channel
and attach the male speaker connector to the
speaker wire as shown on Page 2.
3. Assemble the provided screw and square-neck nut onto the lower
hole in the back of stand leaving a 3mm gap between the nut
flange and the stand. [Figure10]
4. Line up the center of the + shaped channel with the square-neck
nut on the stand and push the speaker in and down on the nut.
5. Thread the provided 1/4 20 screw through the top hole in the
stand into the threaded hole in the speaker and tighten the screw.
MYTHOS XTR-50
OWNER’S MANUAL
Figure 1
Figure 2
Figure 3
Figure 5
Figure 4
Figure 6
Figure 7
Figure 8
Especificaciones del producto
| Marca: | Definitive Technology |
| Categoría: | Altavoces |
| Modelo: | Mythos XTR-50 |
¿Necesitas ayuda?
Si necesitas ayuda con Definitive Technology Mythos XTR-50 haz una pregunta a continuación y otros usuarios te responderán
Altavoces Definitive Technology Manuales
14 Octubre 2024
Altavoces Manuales
- Altavoces Philips
- Altavoces Panasonic
- Altavoces Daewoo
- Altavoces Pioneer
- Altavoces Hitachi
- Altavoces Nedis
- Altavoces Pyle
- Altavoces Livoo
- Altavoces Manta
- Altavoces Caliber
- Altavoces Klip Xtreme
- Altavoces OK
- Altavoces Blaupunkt
- Altavoces Exibel
- Altavoces Logik
- Altavoces Bowers And Wilkins
- Altavoces Harman Kardon
- Altavoces KEF
- Altavoces Salora
- Altavoces Denver
- Altavoces Sunstech
- Altavoces Bang And Olufsen
- Altavoces GoGEN
- Altavoces Marquant
- Altavoces Krüger And Matz
- Altavoces Steren
- Altavoces Bose
- Altavoces IWantit
- Altavoces McIntosh
- Altavoces Marshall
- Altavoces Focal
- Altavoces Naxa
- Altavoces Teac
- Altavoces Vakoss
- Altavoces Wharfedale
- Altavoces Audio Pro
- Altavoces Dali
- Altavoces Dymond
- Altavoces Tangent
- Altavoces SoundBot
- Altavoces Adam
- Altavoces Mission
- Altavoces Bolse
- Altavoces Xoopar
- Altavoces Streetz
Últimos Altavoces Manuales
21 Octubre 2024
20 Octubre 2024
20 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
17 Octubre 2024
17 Octubre 2024