Delta Dore Tyxal+ CS 8000 Manual de Usario

Delta Dore suena la alarma Tyxal+ CS 8000

Lee a continuación 📖 el manual en español para Delta Dore Tyxal+ CS 8000 (22 páginas) en la categoría suena la alarma. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/22

CS 8000 TYXAL +

* Up to 10 years valid under the condions of use specied in the installaon instrucons and the General Condions of Sale.

Alarm system

User guide

- 2 -

We recommend you read this user guide carefully before any use.

• The battery life speciﬁed is for normal use.

Warnings

Glossary

PSTN: Public Switched Telephone Network.

A PSTN telephone transmitter is connected to the

telephone line of your home.

GSM: Global System for Mobile communications.

A GSM telephone transmitter is connected to a wireless

phone network.

Tamper alarm: the products are protected against

being opened or dislodged.

If a burglar tries to open or dislodge one of the products,

a message is sent to the alarm control unit which triggers

its indoor siren, and the installation's sirens (indoor or

outdoor siren, telephone transmitter).

The tamper alarm is permanently activated even if the

system is off. It only generates the external siren noise if

the system is on.

Discreet emergency alarm: the "discreet emergency

alarm" function needs a telephone transmitter.

It can warn the outside of any aggressor by a discreet

call.

Emergency alarm with siren: the "emergency alarm

with siren" function immediately

warns the neighbours by triggering both a phone call

via a transmitter as well as the sound of the associated

sirens.

Maintenance mode: the Maintenance mode is reserved

for the installer. It is used to perform the activation,

maintenance and diagnostic operations.

The system must be off to access this mode.

The alarm control unit is switched to maintenance mode

by a keypad (touch screen or simple), a remote control or

a badge reader.

To open the products without triggering the alarm, you

must set the alarm control unit to maintenance mode.

Restricted code: a user code can be of the restricted

type, that is to say that it only gives access to the On and

Off commands of the zones with which it is associated

(e.g. maintenance personnel, delivery, etc.).

Problem beeps: They report that an action is rejected

by a series of beeps. You must consult the events on the

touch screen keypad (Info menu) to determine the nature

of the problem.

Warning beeps: They report that an alarm or automatic

operation is imminent through a series of beeps at

intervals. After the warning period, the alarm control unit

siren can be set off.

Contents

- 4 -

Contents

7. Changing your access code 25 ..............................................................................................................

7.1 General 25 .........................................................................................................................................................................

7.2 Using your touch screen keypad 25 ...................................................................................................................................

7.3 Using your simple keypad 25 .............................................................................................................................................

8. Personalising the products with your touch screen keypad 26 ..........................................................

8.1 Setting the clock 26 ............................................................................................................................................................

8.2 Language selection 26 .......................................................................................................................................................

8.3 Download 26 ......................................................................................................................................................................

8.4 Weekly programming ....................................................................................................................................................27

8.5 Name the products 29 .......................................................................................................................................................

8.6 Button lighting 30 ...............................................................................................................................................................

8.7 Button beeps 30 .................................................................................................................................................................

8.8 Screen brightness 30 .........................................................................................................................................................

8.9 Sound levels 31 .................................................................................................................................................................

8.10 Call numbers 32 ...............................................................................................................................................................

8.11 Incoming calls 33 .............................................................................................................................................................

8.12 Auto attendant 33 .............................................................................................................................................................

8.13 SMS alert to relatives (only with a GSM transmitter) 34 ..................................................................................................

8.14 SIM card (only with a GSM transmitter) 34 ......................................................................................................................

9. Zone management 35 ..............................................................................................................................

9.1 Naming the zone 35 ...........................................................................................................................................................

10. Door chime function 35 .........................................................................................................................

11. Testing your installation 36 ...................................................................................................................

11.1 Test under operating conditions 36 ..................................................................................................................................

11.2 Test on a speciﬁc product............................................................................................................................................37

12. Activating/Deactivating a product 38 ...................................................................................................

12.1 Using your touch screen keypad 38 .................................................................................................................................

12.2 Using your telephone transmitter 38 ................................................................................................................................

13. Summary of LEDs and audible signals 39 ..........................................................................................

13.1 Operation of the front panel LED 39 ................................................................................................................................

13.2 Audible signals 39 ............................................................................................................................................................

14. Signalling of dead batteries 40 .............................................................................................................

15. Troubleshooting ................................................................................................................................ 41