Delta 14-651 Manual de Usario
Delta
taladradora
14-651
Lee a continuación 📖 el manual en español para Delta 14-651 (43 páginas) en la categoría taladradora. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/43
Instruction manual
Manuel d’utilisation
Manual de instrucciones
14-651
Type III
www.DeltaMachinery.com
Français (16)
Español (29)
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO
Y PÓLIZA DE GARANTÍA. LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
1/2 HP BENCH MORTISER
Mortaiseuse à bédane creux de 1/2 HP
Mortajadora de cincel hueco de 1/2 HP
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all warnings and operating instructions before using any tool
or equipment. When using tools or equipment, basic safety precautions should always be followed
to reduce the risk of personal injury. Improper operation, maintenance or modication of tools or
equipment could result in serious injury and property damage. There are certain applications for
which tools and equipment are designed. DELTA® Power Equipment Corporation strongly recommends that
this product NOT be modied and/or used for any application other than for which it was designed.
If you have any questions relative to its application DO NOT use the product until you have written DELTA®
Power Equipment Corporation and we have advised you. Contact us online at www.DeltaMachinery.com or by
mail at Technical Service Manager, DELTA® Power Equipment Corporation , 4825 Highway 45 North, Jackson,
TN 38305.
Information regarding the safe and proper operation of this tool is available from the following sources:
• Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.
com
• National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
• American National Standards Institute, 25 West 43rd Street, 4 oor, New York, NY 10036 www.ansi.org - ANSI
01.1 Safety Requirements for Woodworking Machines
• U.S. Department of Labor www.osha.gov
SAVE THESE INSTRUCTIONS!
SAFETY GUIDELINES - DEFINITIONS
will death or serious injury
could death or serious
injury.
may minor or moderate
injury.
may property damage
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, al ways
wear NIOSH/OSHA approved, properly tting face mask or respirator when using such tools.
IMPORTANT SAFETY INSTRUCTIONS .......................2
SAFETY GUIDELINES - DEFINITIONS ........................2
GENERAL SAFETY RULES 3 ..........................................
ADDITIONAL SPECIFIC SAFETY RULES 4 ...................
FUNCTIONAL DESCRIPTION .......................................6
CARTON CONTENTS ...................................................6
ASSEMBLY ....................................................................7
OPERATION ................................................................11
TROUBLESHOOTING .................................................13
MAINTENANCE ...........................................................13
SERVICE ......................................................................14
ACCESSORIES ...........................................................14
WARRANTY .................................................................15
FRANÇAIS ...................................................................16
ESPAÑOL ....................................................................29
GENERAL SAFETY RULES
.
Failure to follow these rules may result in serious personal injury.
FOR YOUR OWN SAFETY, READ THE INSTRUCTION
MANUAL BEFORE OPERATING THE MACHINE.
WEAR EYE AND HEARING PROTECTION. ALWAYS
USE SAFETY GLASSES.
WEAR PROPER APPAREL.
DO NOT USE THE MACHINE IN A DANGEROUS
ENVIRONMENT.
MAINTAIN ALL TOOLS AND MACHINES IN PEAK
CONDITION.
CHECK FOR DAMAGED PARTS.
should be properly repaired or
replaced with DELTA® or factory authorized replacement
parts.
KEEP THE WORK AREA CLEAN.
KEEP CHILDREN AND VISITORS AWAY.
REDUCE THE RISK OF UNINTENTIONAL STARTING.
USE THE GUARDS.
REMOVE ADJUSTING KEYS AND WRENCHES BEFORE
STARTING THE MACHINE.
USE THE RIGHT MACHINE.
USE RECOMMENDED ACCESSORIES.
USE THE PROPER EXTENSION CORD.
SECURE THE WORK PIECE.
FEED THE WORK PIECE AGAINST THE DIRECTION OF
THE ROTATION OF THE BLADE, CUTTER, OR ABRASIVE
SURFACE.
DON’T FORCE THE WORK PIECE ON THE MACHINE.
DON’T OVERREACH.
NEVER STAND ON THE MACHINE.
NEVER LEAVE THE MACHINE RUNNING UNATTENDED.
TURN THE POWER OFF.
TURN THE MACHINE “OFF”, AND DISCONNECT THE
MACHINE FROM THE POWER SOURCE
MAKE YOUR WORKSHOP CHILDPROOF WITH
PADLOCKS, MASTER SWITCHES, OR BY REMOVING
STARTER KEYS.
. STAY ALERT, WATCH WHAT YOU ARE DOING, AND
USE COMMON SENSE. DO NOT USE THE MACHINE
WHEN YOU ARE TIRED OR UNDER THE INFLUENCE
OF DRUGS, ALCOHOL, OR MEDICATION.
USE OF THIS TOOL CAN GENERATE
AND DISBURSE DUST OR OTHER AIRBORNE
PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE
SILICA DUST AND ASBESTOS DUST.
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
Especificaciones del producto
| Marca: | Delta |
| Categoría: | taladradora |
| Modelo: | 14-651 |
¿Necesitas ayuda?
Si necesitas ayuda con Delta 14-651 haz una pregunta a continuación y otros usuarios te responderán
taladradora Delta Manuales
24 Agosto 2024
21 Agosto 2024
taladradora Manuales
- taladradora Bosch
- taladradora AEG
- taladradora DeWalt
- taladradora Silverline
- taladradora Ferm
- taladradora Workzone
- taladradora Ozito
- taladradora Gude
- taladradora Makita
- taladradora Tryton
- taladradora Hitachi
- taladradora Black And Decker
- taladradora Vonroc
- taladradora Maestro
- taladradora Stanley
- taladradora Skil
- taladradora Hyundai
- taladradora Yato
- taladradora Hilti
- taladradora Ryobi
- taladradora Festool
- taladradora Metabo
- taladradora Parkside
- taladradora Worx
- taladradora Meec Tools
- taladradora Milwaukee
- taladradora Hikoki
- taladradora Sun Joe
- taladradora Dremel
- taladradora Tacklife
- taladradora Hazet
- taladradora Einhell
- taladradora Baumr-AG
- taladradora Luxor
- taladradora Maktec
- taladradora Steren
- taladradora Bort
- taladradora Tanaka
- taladradora Craftsman
- taladradora Malmbergs
- taladradora Power Craft
- taladradora Powerplus
- taladradora Porter-Cable
- taladradora Cotech
- taladradora Genesis
- taladradora Eibenstock
- taladradora Topcraft
- taladradora Scheppach
- taladradora Sparky
- taladradora Gamma
- taladradora Clas Ohlson
- taladradora Powerfix
- taladradora Carat
- taladradora Kress
- taladradora Bavaria
- taladradora Flex
- taladradora Duro
- taladradora Kawasaki
- taladradora Berner
- taladradora Zipper
- taladradora Mafell
- taladradora Fieldmann
- taladradora Varo
- taladradora Defort
- taladradora Max
- taladradora Truper
- taladradora Kinzo
- taladradora Bruder Mannesmann
- taladradora Cocraft
- taladradora Powerblade
- taladradora Herkules
- taladradora Meister Craft
- taladradora Toolcraft
- taladradora RIDGID
- taladradora Rupes
- taladradora Batavia
- taladradora Proxxon
- taladradora Protool
- taladradora Westfalia
- taladradora Economy
- taladradora Holzmann
- taladradora Fein
- taladradora Huvema
- taladradora Black Decker
- taladradora Stomer
- taladradora Fe Powertools
- taladradora Elu
- taladradora Blucave
- taladradora Max Bahr
- taladradora Lux Tools
- taladradora Goon
- taladradora Wolfcraft
- taladradora Dedra
- taladradora Kreg
- taladradora Sthor
- taladradora Verto
- taladradora Wurth
- taladradora Spit
- taladradora Global
- taladradora Rok
- taladradora Profitech
- taladradora Graphite
- taladradora Narex
- taladradora Rikon
- taladradora Duro Pro
- taladradora Baier
- taladradora Alpha Tools
- taladradora RUKO
- taladradora Felisatti
- taladradora MSW
- taladradora Ribimex
- taladradora Robust
- taladradora Einhell Bavaria
- taladradora Ergotools Pattfield
- taladradora MyTool
- taladradora McKenzie
- taladradora G-Technology
- taladradora Rodcraft
- taladradora Bavaria By Einhell
- taladradora Handwerk
- taladradora Stalco
Últimos taladradora Manuales
27 Octubre 2024
24 Octubre 2024
23 Octubre 2024
21 Octubre 2024
19 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
16 Octubre 2024
16 Octubre 2024