DeWalt DW7187 Manual de Usario

DeWalt máquina de aserrar DW7187

Lee a continuación 📖 el manual en español para DeWalt DW7187 (28 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/28
DW7187 Miter Saw Laser System
Système laser pour scie à onglets DW7187
Sistema láser para sierra ingletadora DW7187
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com
English
1
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-
4-DEWALT (1-800-433-9258)
Safety Instructions for Lasers
WARNING! Read and understand all instructions.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious personal injury.
WARNING: For your own safety, read the tool
instruction manual before using any accessory. Failure
to heed these warnings may result in personal injury and
serious damage to the tool and the accessory. When
servicing this tool, use only identical replacement parts.
SAVE THESE INSTRUCTIONS
WARNING! Laser Radiation Exposure. Do not disassem-
ble or modify the laser. There are no user serviceable parts
inside. Serious eye injury could result.
WARNING: Hazardous Radiation. Use of controls or adjust-
ments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
• Do not operate the laser in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
• Store idle laser out of reach of children and other
untrained persons. Lasers are dangerous in the hands of
untrained users.
• Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqual-
ified personnel may result in injury. To locate your nearest
DEWALT service center call 1-800-4-DEWALT (1-800-433-
9258) or go to http://www.dewalt.com on the Internet.
• Do not use optical tools such as a telescope or transit to
view the laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause any-
one to intentionally or unintentionally stare into the laser
beam. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser
on increases the risk of staring into the laser beam.
• Do not disassemble the laser or laser power supply.
There are no user serviceable parts inside.
• Do not modify the laser in any way. Modifying the tool may
result in Hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow
children to operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. Removing labels
increases the risk of exposure to radiation.
•Use Miter Saw Laser System only with specifically
designated DEWALT Miter Saws. Use of Miter Saw Laser
System on non-designated tools may create a risk of injury.
•Use Laser part # 623020-00 only with Laser Power Supply
part # 618212-00. Use of Laser with another laser power
supply may create injury.
•Use Laser Power Supply part # 618212-00 only with Laser
part # 623020-00. Use of Laser with another laser power
supply may create injury.
CAUTION: Use of controls or adjustments or perform-
ance of procedures other than those specified herein may
result in Hazardous Radiation Exposure.
• The label on your tool may include the following symbols.
V ..................volts mW ........milliwatts
......Laser warning nm ..........wavelength in
.................... ..............symbol nanometers
II ..................Class II Laser IIIa ..........Class IIIa Laser
................alternating current ........direct current
W..................watts Hz ..........hertz
English
2
WARNING LABELS
For your convenience and safety, the following label is on your
laser (Fig. 1).
CAUTION: LASER
RADIATION – DO
NOT STARE INTO
BEAM. CLASS 2
LASER PRODUCT.
CAUTION: CLASS 2
LASER RADIATION
WHEN OPEN DO
NOT STARE INTO
THE BEAM.
Laser
Information
The DW7187 Miter Saw
Laser System is a Class 2
laser product and complies
with 21CFR 1040.10 and
1040.11 except for devia-
tions pursuant to laser notice No. 50, dated July 26, 2001.
Installation of Miter Saw Laser
System
WARNING: Read all instructions for the Installation of Laser
Power Supply and the Installation of Laser before proceeding
with the Installation of the Miter Saw Laser System.
INSTALLATION OF LASER POWER SUPPLY (LPS)
WARNING: Disconnect the saw from the power source.
1. Remove the two screws from the miter saw handle with sup-
plied T20 Torx wrench. Save the screws for the assembly of
the Laser Power Supply (LPS) in Step 4. Retain the handle
cover for future use if LPS is removed.
FIG. 1
2. Attach the connections to the LPS.
3. Arrange the wire connection
such that the wide portion of the
connector is placed against the
bottom of the miter saw handle
and fit the LPS to the handle.

Especificaciones del producto

Marca: DeWalt
Categoría: máquina de aserrar
Modelo: DW7187

¿Necesitas ayuda?

Si necesitas ayuda con DeWalt DW7187 haz una pregunta a continuación y otros usuarios te responderán


máquina de aserrar DeWalt Manuales

DeWalt

DeWalt DWM120 Manual de Usario

2 Octubre 2024
DeWalt

DeWalt DW309K Manual de Usario

30 Septiembre 2024
DeWalt

DeWalt DW317 Manual de Usario

30 Septiembre 2024
DeWalt

DeWalt DW100 Manual de Usario

23 Septiembre 2024
DeWalt

DeWalt DW861 Manual de Usario

19 Septiembre 2024
DeWalt

DeWalt DCS397 Manual de Usario

17 Septiembre 2024
DeWalt

DeWalt DWE249 Manual de Usario

17 Septiembre 2024
DeWalt

DeWalt DCMCS574 Manual de Usario

16 Septiembre 2024
DeWalt

DeWalt DAH180032 Manual de Usario

16 Septiembre 2024
DeWalt

DeWalt DCS378 Manual de Usario

16 Septiembre 2024

máquina de aserrar Manuales

Últimos máquina de aserrar Manuales

Hikoki

Hikoki C 6BU3 Manual de Usario

27 Octubre 2024
Dedra

Dedra DED7060 Manual de Usario

27 Octubre 2024
Einhell

Einhell KGS 190 Manual de Usario

27 Octubre 2024
Sun Joe

Sun Joe SWJ599E Manual de Usario

27 Octubre 2024
McCulloch

McCulloch CSE1935S Manual de Usario

27 Octubre 2024
Hikoki

Hikoki C10FSB Manual de Usario

27 Octubre 2024
Metabo

Metabo STA 18 LTX 150 BL Manual de Usario

26 Octubre 2024
Craftsman

Craftsman 917.377662 Manual de Usario

26 Octubre 2024
Maruyama

Maruyama MCV51 Manual de Usario

26 Octubre 2024
Powerplus

Powerplus POWX53300T Manual de Usario

22 Octubre 2024