DeWalt DW744X Manual de Usario

DeWalt máquina de aserrar DW744X

Lee a continuación 📖 el manual en español para DeWalt DW744X (56 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/56

DW744

Heavy-Duty 10" (254 mm) Job Site Table Saw

Banc de scie circulaire industrielle de chantier de 254 mm (10 po)

Sierra de banco para el lugar de trabajo de 254 mm (10 pulg.) de alta resistencia

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES

DE USAR EL PRODUCTO.

Before returning this product call

1-800-4-DEWALT

IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR

DEWALT PURCHASE,

call 1-800-4-DEWALT

IN MOST CASES, A D WALT REPRESENTATIVE CAN RESOLVE E

YOUR PROBLEM OVER THE PHONE.

IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.

YOUR FEEDBACK IS VITAL TO THE SUCCESS OF

DEWALT’S QUALITY IMPROVEMENT PROGRAM.

Questions? See us on the World Wide Web at www.dewalt.com

English

Deﬁ nitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read

the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

NOTICE: Indicates a practice not related to personal injury which, if not avoided,

may result in property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,

CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258).

General Safety Rules

WARNING: Read all instructions before operating product. Failure to follow all

instructions listed below may result in electric shock, fire and/or serious injury.

SAVE THESE INSTRUCTIONS

WARNING: FOLLOW ALL WIRING CODES and recommended electrical connections

to prevent shock or electrocution.

Grounding Instructions

If saw is of grounded construction, read the following instructions.

DANGER: SHOCK HAZARD. THIS MACHINE MUST BE GROUNDED WHILE IN USE.

SERIOUS INJURY COULD RESULT.

ALL GROUNDED, CORD-CONNECTED MACHINES

In the event of a malfunction or breakdown, grounding provides a path of least resistance

for electric current to reduce the risk of electric shock. This machine is equipped with

an electric cord having an equipment-grounding conductor and a grounding plug. The

plug must be plugged into a matching outlet that is properly installed and grounded in

accordance with all local codes and ordinances. Do not modify the plug provided - if it

will not fit the outlet, have the proper outlet installed by a qualified electrician. Improper

connection of the equipment-grounding conductor can result in risk of electric shock.

The conductor with insulation having an outer surface that is green with or without

yellow stripes is the equipment-grounding conductor. If repair or replacement of the

electric cord or plug is necessary, do not connect the equipment-grounding conductor

to a live terminal. Check with a qualified electrician or service personnel if the grounding

instructions are not completely understood, or if in doubt as to whether the machine is

properly grounded. Use only three-wire extension cords that have three-prong grounding

type plugs and matching three-conductor receptacles that accept the machine’s plug, as

shown in Figure A. Repair or replace damaged or worn cord immediately.

GROUNDED, CORD-CONNECTED MACHINES INTENDED FOR USE ON A SUPPLY

CIRCUIT HAVING A NOMINAL RATING LESS THAN 150 VOLTS

If the machine is intended for use on a circuit that has an outlet that looks like the one

illustrated in Fig. A, the machine will have a grounding plug that looks like the plug

illustrated in Fig. A. A temporary adapter, which looks like the adapter illustrated in Fig.

B, may be used to connect this plug to a matching two-conductor receptacle as shown

in Fig. B if a properly grounded outlet is not available. The temporary adapter should be

used only until a properly grounded outlet can be installed by a qualified electrician. The

green-colored rigid ear, lug, and the like, extending from the adapter must be connected

to a permanent ground such as a properly grounded outlet box. Whenever the adapter

is used, it must be held in place with a metal screw. DO NOT use a sheet metal screw.

GROUNDED

OUTLET

BOX

GROUNDING PIN

GROUNDING

MEANS

ADAPTER

GROUNDING PIN

FIG.A FIG. B FIG. C FIG. D

NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian

Electric Code.

DANGER: IN ALL CASES, MAKE CERTAIN THAT THE RECEPTACLE IN QUESTION IS

PROPERLY GROUNDED. IF YOU ARE NOT SURE, HAVE A QUALIFIED ELECTRICIAN

CHECK THE RECEPTACLE.

Double Insulation

If saw is of double-insulated construction, read the following instructions.

This symbol represents double insulated construction. Double insulated tools are

constructed throughout with two separate layers of electrical insulation or one double

thickness of insulation between you and the tool’s electrical system. Tools built with this

insulation system are not intended to be grounded. As a result, your tool is equipped with a

two prong plug which permits you to use extension cords without concern for maintaining a

ground connection. Repair or replace damaged or worn cord immediately

NOTE: Double insulation does not take the place of normal safety precautions when

operating this tool. The insulation system is for added protection against injury resulting from

a possible electrical insulation failure within the tool.

POLARIZED PLUGS

To reduce the risk of electric shock, this equipment has a polarized plug

(one blade is wider than the other). This plug will fit in a polarized outlet

only one way. If the plug does not fit fully into the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician to install the proper

outlet. Do not change the plug in any way.

Important Safety Instructions

• TO REDUCE THE RISK OF KICKBACK AND OTHER INJURIES, use all components

of the guarding system (blade guard assembly, riving knife and anti-kickback) for every

operation for which they can be used including all through cutting.

• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that

keys and adjusting wrenches are removed from spindle before turning tool on. Tools,

scrap pieces, and other debris can be thrown at high speed, causing injury.

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

• DO NOT USE THE MACHINE IN A DANGEROUS ENVIRONMENT. The use of power

tools in damp or wet locations or in rain can cause shock or electrocution. Keep your

work area well-lit to avoid tripping or placing arms, hands, and fingers in danger.

• KEEP CHILDREN AWAY. All visitors should be kept at a safe distance from work area.

Your shop is a potentially dangerous environment.

• MAKE WORKSHOP CHILDPROOF with padlocks, master switches, or by removing

starter keys. The unauthorized start-up of a machine by a child or visitor may result in

injury.

Especificaciones del producto

Marca:	DeWalt
Categoría:	máquina de aserrar
Modelo:	DW744X
Color del producto:	Silver, White
Peso.:	17000 g
Ancho:	360 mm
Profundidad:	360 mm
Altura:	610 mm
Indicador de nivel de agua:	Ja
Nivel de ruido:	47 dB
Peso del embalaje:	17300 g
Ancho del embalaje:	385 mm
Empaquetadura en profundidad:	385 mm
Altura del embalaje:	662 mm
Capacidad del tanque de agua:	8 l
Temporizador integrado:	Ja
Medio de refrigeración:	134a
Certificación:	CE
Filtro de aire:	Ja
Filtración:	Ja
Tanque de agua extraíble:	Ja
higrómetro:	Ja
Productos por palet:	6 stuk(s)
Consumo de energía (típico):	650 W
Temperatura de funcionamiento (TT):	5 - 35 °C
Ruedas:	Ja
Adecuado para volúmenes de habitación de hasta:	160 m³
Duración del temporizador (máxima):	24 uur