Digimerge Echelon DCB34DL Manual de Usario

Digimerge Cámara de vigilancia Echelon DCB34DL

Lee a continuación 📖 el manual en español para Digimerge Echelon DCB34DL (2 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Product Information

User Manuals

Quick Start Guides

Specificatio Sheets

Software Upgrades

Firmware Upgrades

VISIT

www.digimerge.com

Digimerge Technologies Inc.

As our products are subject to continuous improvement,

Digimerge reserves the right to modify product design,

specifications and prices, without notice and without

incurring any obligation. E&OE

IT’S ALL ON THE WEB!

Camera Specifications

ULTRA RESOLUTION

VARIFOCAL IR

BULLET CAMERA

Specfications:

1/3" Sony Super HAD™ II

Video Output

Horizontal Resolution

Termination

Lens Focal Length / Type

S/N Ratio

Power Consumption

NTSC: 768 (H) x 494 (V)

600 TVL

2.8-12mm F1.4 / Varifocal

> 50dB (AGC off)

Internal; 2:1 Interlace

75ft (23m); 30 LED's

Operating Temp. -4°F ~ 122°F

Comp. 1.0 Vpp @ 75ohm

Iris & Shutter Speed AES; 1/60 ~ 1/100,000 sec.

Power Requirement

Dimensions

Minimum Illumination

Video Format / Pixels

0.2 LUX @ F2.0 (IR Off)

0 LUX (IR LEDs ON)

0.9kg / 1.9lbs

Height: 85mm / 3.4”

Width: 137mm / 5.4”

Length: 255mm / 10.1”

Weight

Sync. & Scan. Systems

IR Range

Image Sensor

DCB34DL - 12V DC ±10%

DCB44DL- 12V DC/

24V AC ±10%

Video: BNC Female

DCB34DL - 350 mA

DCB44DL - 12V - 500 MA

24V - 330 mA

FOV (Horizontal) 25 - 88 degrees

Dimensions:

137mm / 5.4”

255mm/ 10.1”

85mm

3.4”

DCB34DL (12V)

English Version 2.0

QUICK START GUIDE

www.digimerge.com

DCB44DL (12/24V)

MODEL:

1. Connect the BNC connector of the camera to the

video cable.

2. DC Power—

Power adapto

r: Connect a 12V DC

Power Adaptor (not included) to the camera. Plug

the Power Adaptor into a local power outlet.

• DC Power—

Power Pigtail

(not included):

Connect a Power Pigtail to the camera. Connect

the terminating wires of the cable directly to the

DC power source.

NOTE: The Power Pigtail is a non-polarity input.You can connect the

wires to either the positive or negative ports of the DC power source.

• :DCB44DL ONLY

AC Power:

Connect

a Power Pigtail

(not included)

to the camera. Connect the terminating wires of

the cable directly to the 24V AC power source.

NOTE: If the onscreen display is blurry, you may need to

set the Monitor Impedence switch to 75 ohms.

3. Adjust the ZOOM and FOCUS knobs as required.

NOTE: If the ZOOM and FOCUS knobs are too tight for

adjustment, use a philips screw driver to slightly

loosen the screws on the knobs.

ZOOM / FOCUS knobs

Screw

Contents Installing the camera

1 x Weatherproof IR Bullet

Camera with Varifocal Lens

1. Use the included mounting template to mark

mounting points.

2. Loosen the fastening screw at camera base using

the small allen key.

3. Rotate the camera base counter clockwise to

separate it from the camera stand.

4. Mount the camera base to the wall using the

included screws.

NOTE: This camera is not intended for ceiling mounting.

If you mount the camera to a ceiling, the camera will

have to point downwards for adequate clearance.

5. Loosen the camera stand screws. using the large

allen key.

6. Feed the BNC/power termination cable through

the camera base. Connect video and power cable

as described in next section 'Setting up the

camera'.

7. Screw the camera clockwise onto the camera

base. Do not tighten all the way.

8. Move the camera to the desired position and while

holding it firmly in place, turn the adjustment ring

on the camera stand clockwise to tighten. Next,

tighten the two screws on the camera stand.

Fastening Screw

Adjustment ring

Camera base

Camera stand screws

Features

• Sony Super HAD™ II / 600TVL

• Advanced Digital Noise Reduction (DNR)*

• 75 ft (23m) IR Night Vision Range**

• 2.8 - 12mm Varifocal Lens

• External Zoom/Focus adjustment

• IP66 Weatherproof rating***

• Cable Through bracket Design

*Default Setting

** IR Illumination range under ideal conditions. Objects at or beyond this

range may be partially or completely obscured, depending on the camera

application.

*** Not recommended for submersion in water

WARNING - A REGULATED UL/CSA APPROVED 12V DC / 24V AC power

supply is REQUIRED for use with this camera. Use of a non-regulated,

non-conforming power supply can damage this product and will void

the warranty.

4 x Mounting screws

Setting up the camera

ATTENTION - Test the camera prior to selecting a permanent

mounting location by temporarily connecting the cameras and

cables to the DVR or Observation System.

PRECAUTIONS

• Use an appropriate low voltage power cable to prevent fire or

electrical shock.

• Make sure to install the camera in an area that can support the

camera weight.

• There are no user serviceable parts inside the camera. Please

do not disassemble the camera.

• Do not clean the lens cover with an abbrasive cleaning material

Please use a soft cloth to clean the lens cover.

1x Mounting Template

1 x Small Allen Key

1 x Large Allen Key

Especificaciones del producto

Marca:	Digimerge
Categoría:	Cámara de vigilancia
Modelo:	Echelon DCB34DL
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Touch
Color del producto:	Wit
Bisagras de puerta:	Links
Pantalla incorporada:	Ja
Temporizador:	Ja
Peso.:	72000 g
Ancho:	600 mm
Profundidad:	640 mm
Altura:	850 mm
tipo de cargador:	Voorbelading
Color de la puerta:	Zwart
Contenido del tambor:	67 l
Temporizador de inicio retrasado:	Ja
Retraso del inicio:	19 uur
Indicación de tiempo restante:	Ja
Bloqueo infantil:	Ja
control wifi:	Ja
Clase de eficiencia energética (antigua):	A+++-40%
Consumo de energía de lavado:	0.72 kWu
Consumo anual de energía de lavado:	140 kWu
Clase de medicamentos centrífugos.:	A
Nivel de ruido (lavado):	55 dB
Monitoreo de espuma:	Ja
Sistema de control de desequilibrio:	Ja
Velocidad centrífuga ajustable:	Ja
Velocidad máxima de centrifugado:	1400 RPM
Alarma de puerta abierta:	Ja
Tipo de embalaje:	Doos
Autolimpieza:	Ja
tecnología inversor:	Ja
Agregar función de ropa (pausa):	Ja
Nivel de ruido durante la centrifugación.:	73 dB
Consumo anual de agua de lavado:	9900 l
Comunicación de campo cercano (NFC):	Nee
Porcentaje de humedad residual:	44 procent
Tiempo de ciclo (máx.):	296 min
Número de programas de lavado:	17
Duración del ciclo (programa de lavado rápido):	14 min
Interruptor-encendido-/-apagado:	Ja
Baja capacidad incorporada (abierta en la parte superior):	Ja
Señal de advertencia:	Ja
Función AquaStop:	Nee
medio cargado:	Ja
Selección del programa de sensores:	Ja
Temperatura-ajustable:	Ja
Consumo de energía (en espera):	0.5 W
Certificación:	CE
Suministro de agua:	Koud
Consumo de energía (cuando está apagado):	0.5 W
Velocidad mínima de centrifugado:	400 RPM
parada de enjuague:	Ja
Diagnóstico del coche:	Ja
Limpieza ecológica del tambor:	Ja
Indicador LED de progreso del programa:	Ja
Función Aclarado Plus:	Ja
Iluminación de la pantalla:	Ja
Color de la iluminación:	Wit
Por ángulo de apertura:	125 °
Opción quitamanchas:	Ja
Apilable:	Ja
Reinicio automático:	Ja
Indicador de mensaje de error:	Ja
Capacidad nominal:	10 kg
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Tipo-de-visualización:	LED
Tipo de motor:	Riemloos
turbolavado:	Ja
Contenido del tambor 2:	19 l
No enjuague:	Ja
Reinicio del filtro indicador:	Ja
Programas-de-lavado:	Lingerie, Wave wash, Hygiene/anti-allergy, Baby care, Blouse/shirt, Cotton, Easy care, Hand/wool, Hand, Wool, Jeans/denim, Mix, Quick, Sport, Steam, Synthetics, Timed, Spin/drain, Delicate/silk
tambor 2:	Ja
Capacidad del tambor 2:	2 kg
Tecnologías LG (cuidado de la ropa):	Inverter Direct Drive Motor
Tipo de cargador de tambor 2:	Bovenbelading