Digitus 1000Base-T Manual de Usario

Digitus Convertidor de audio/video 1000Base-T

Lee a continuación 📖 el manual en español para Digitus 1000Base-T (3 páginas) en la categoría Convertidor de audio/video. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Gigabit Fiber Ethernet Converter

10/100/1000Base-T/TX to 1000Base-SX/LX

User’s Manual

Overview

Gigabit fiber media converter is a 10/100/1000 auto negotiating media converter. The copper port

auto negotiates the connected device’s speed and duplex mode: 10/100/1000Mbps half duplex;

or 10/100/1000 Mbps full duplex; the fiber port always operates at 1000Mbps. The maximum

distance is Multi-mode 0.5 or 2km and single-mode 10/20/40/60km or 80km.

Installation

1. Interface

RJ-45 interface

The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.

It features the function of automatically identifying the through line and cross wire

Fiber interface

Fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the

two sets of optical transceiver are interfaced or connected to switch with fiber interface, the

fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).

2. Connection

The network device (work station, hub or switch is connected to RJ-45 ) with RJ-45 interface

jack of the media converter through twisted-pair. The fiber device is connected to fiber

interface of the media converter. Then switch on. The corresponding LED is on for correct

connection. (See the table below for the LED indicator lamp)

Table 1 : Front panel for single fiber media converter

Table 2 : Front panel for dual fiber media converter

Explanation for LED indicator

LED indicator serve as device monitoring and trouble display.

The following is the explanation for each LED indicator lamp.

LED Status Function Describing

PWR Power LED ON Power is ON.

OFF Power is Fail.

FX Fiber port signal

detect LED

ON Laser is receiving.

OFF No laser input.

FX-LINK/ACT Fiber port link/action

status LED

ON Fiber link is ok.

Blink Data is been received

or transmitted.

OFF Fiber link is fail.

1000M UTP port speed LED ON 1000M speed

OFF 100M speed

TX-LINK/ACT UTP port link/action

status LED

ON Link is ok.

Blink Data is been received

or transmitted.

OFF Fiber link is fail.

FDX/COL UTP port duplex LED ON Full duplex

OFF Half Duplex

Technical parameters:

1. Standard Protocol:

IEEE802.3 10 Base-T standard

IEEE 802.3u 100Base-TX/FX standard

IEEE 802.3z 1000Base-TX/FX standard

2. Connector: one UTP RJ-45connector,one SC/ST connector

3. Operation mode: full duplex mode or half duplex mode

4. Environmental temperature: 0℃-60 ℃

5. Relative humidity: 5%-90%

6. TP cable: Cat5 UTP cable

7. Transfer fiber:

multi-mode: 50/125, 62.5/125 or 100/140μm

single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

8. Max. 2M buffer memory built in chip

9. Automatic identification of MDI/MDI-X cross line

10. High-performance 1.4Gbps memory bandwidth.

Cautions:

1. This product is suitable for indoor application.

2. Put on the dust cover of fiber interface when not used.

3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.

4. Single optical fiber transceiver must be used in scription in delivery). pair (See the attachment de

Trouble shooting:

1. Device is not matched. Please select the corresponding network device according to the transfer rate of

the product (10Mbps or 100Mbps) when connected to other network devices (network card, hub, switch).

2. Line loss is excessive during the fiber wiring. Excessive loss in connector plug-in and fiber soldering

welding, and excessive intermediate nodes may cause excessive loss rate or abnormal operation.

Especificaciones del producto

Marca:	Digitus
Categoría:	Convertidor de audio/video
Modelo:	1000Base-T

¿Necesitas ayuda?

Si necesitas ayuda con Digitus 1000Base-T haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Convertidor de audio/video Digitus Manuales

Digitus DN-82022 Manual de Usario

12 Septiembre 2024

Digitus DN-82024 Manual de Usario

12 Septiembre 2024

Digitus DN-82140 Manual de Usario

12 Septiembre 2024

Digitus DN-652104 Manual de Usario

12 Septiembre 2024

Digitus DN-82124 Manual de Usario

12 Septiembre 2024

Digitus DN-82133 Manual de Usario

12 Septiembre 2024

Digitus 1000Base-T Manual de Usario

12 Septiembre 2024

Digitus DS-40310 Manual de Usario

31 Agosto 2024

Digitus Digital to Analog Audio Converter DS-40133 Manual de Usario

20 Julio 2024

Digitus DS-40137 Manual de Usario

18 Julio 2024

Convertidor de audio/video Manuales

Últimos Convertidor de audio/video Manuales

StarTech.com ST122VGA Manual de Usario

25 Octubre 2024

D-Link DMC-805X Manual de Usario

23 Octubre 2024

Trendnet TFC-GSFP Manual de Usario

22 Octubre 2024

Trendnet TFC-FSFP Manual de Usario

22 Octubre 2024

D-Link DMC-300M Manual de Usario

21 Octubre 2024

Tripp Lite P569-006-IND2 Manual de Usario

19 Octubre 2024

Abus TVAC20001 Manual de Usario

10 Octubre 2024

Cambridge DacMagic Manual de Usario

4 Octubre 2024

Konig KN-HDMICON26 Manual de Usario

2 Octubre 2024

LevelOne GVM-1101 Manual de Usario

30 Septiembre 2024