Digitus DA-71104 Manual de Usario

Lee a continuación 📖 el manual en español para Digitus DA-71104 (3 páginas) en la categoría Externe harde schijf. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
2.5" SSD/HDD Enclosure SATA 2 – USB 2.0
Introduction
Congratulations on your purchase of this Portable USB2.0 Hard Drive Enclosure. It's a great way of
making a lightweight, portable mass storage device with an unused internal hard drive, and it will
be detected and installed automatically by the computer when connected. Depending on the ca-
pacity of the drive used, you can keep large files, run programs and play videos directly from it,
thanks to its super-speed USB2.0 connection. It can also be used as a backup drive to a computer
or other devices.
Specification
Transfer interface USB2.0
Transfer rate 480Mps (MAX)
Support HDD 2.5" Hard disk
Work temperature -40~65 °C
Work humidity 8%~90%
Storage humidity 5%~95%
Operate system Windows 2000/XP/VISTA/WIN7/8/10,iOS, MAC OS X and above version
System Requirements
Hardware: computer should have USB port
Software: Windows 2000/XP/VISTA/WIN7/8/10, iOS, MAC OS X and above version
Note: Windows98 have to install CD Driver
Package Content
2.5" SSD/HDD Enclosure SATA 2 - USB 2.0
Screwdriver
Screws
USB 2.0 cable
Manual
Installation of Hard Drive
1. Slide opens the disk tray and installs hard drive into the tray
2. Make sure the SATA connector fits into the hard drive well
3. Slide the hard disk in and fix the tray by screws in real
4. Connect the enclosure with computer by USB cable
5. When attached to PC or device, click 'My Computer' and hard drive will appear
6. No additional drivers required
Operation System
Windows 2000/XP/VISTA/WIN7/8/10, iOS, MAC OS X
No driver program is necessary. Connect the USB cable to PC. Click “My computer” and hard-disc
will appear. An icon for online plug should appear on the lower right corner of the status bar (new
hard-disc should be divided into sections with F DISK first, then its icon will appear and normal
operation can start after formatting.)
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of
Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of con-
formity can be requested by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment. In
this case, the user can be requested to undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany

Especificaciones del producto

Marca: Digitus
Categoría: Externe harde schijf
Modelo: DA-71104

¿Necesitas ayuda?

Si necesitas ayuda con Digitus DA-71104 haz una pregunta a continuación y otros usuarios te responderán




Externe harde schijf Digitus Manuales

Externe harde schijf Manuales

Últimos Externe harde schijf Manuales