Digitus DA-81608 Manual de Usario

Digitus trituradora de papel DA-81608

Lee a continuación 📖 el manual en español para Digitus DA-81608 (5 páginas) en la categoría trituradora de papel. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/5
Paper Shredder X10
Manual
DA-81608
2
This device is solely intended to shred/destroy a maximum of 10 (unstapled) sheets of paper
per operation. Any other use is deemed incorrect use and thus will invalidate the extended
warranty and endanger your safety. The device cannot shred laminated paper or plastic
sleeves and will be irreparably damaged if used in this way.
Safety precautions:
Warning:
• Read through these operating instructions before starting to use the device and keep them
safe for later consultation.
• To avoid injury, keep long and/or lightweight objects, such as clothing (scarves, ties, etc.),
jewellery (necklaces, bracelets, etc.) as well as long hair away from the opening where
paper is inserted.
• If the device is not going to be used for an extended period, switch it off entirely and
unplug the power socket.
• Do not insert hands or fingers into the input slot since this may cause serious injuries.
• Avoid all contact with liquids and do not spray any flammable liquids, compressed air or
gases into or onto the device as these could easily ignite.
• Unplug or switch off the device before moving, cleaning or emptying it.
• Immediately switch off the device in the event of damage or improper functioning and
unplug the power socket. Get the device checked by a specialist dealer or customer service.
• The device must not be operated using a damaged power cable.
• Empty the collecting container regularly.
• Do not leave the shredder unattended, especially if there are children or animals nearby.
The device is not a toy - ensure it is out of the reach of children and animals.
• The device is only suitable for use indoors.
• Keep the device as close as possible to the source of power in case of emergencies . If
possible, do not use an extension cable.
• This device was designed to shred paper up to DIN A4 size (80g/m²). Larger sheets of paper
must be folded or cut until they are A4-sized or smaller.
• To avoid overloading, ensure that you do not exceed the maximum number of sheets per
operation.
• Do not insert any plastic covers or metal strips into the cutting unit since such materials
may damage the blades.
• Remove all paper clips and staples before inserting the paper.
3
Placing the shredder:
1. Place the device on a smooth and flat surface.
2. Ensure the device is positioned in a distance from heaters or other sources of heat.
3. Where possible, avoid using extension cables or multi-way sockets. It is advisable to
connect the device directly to the wall socket using the power cable (in accordance with
the technical specifications).
4. Safely position the shredder above the paper basket while ensuring your fingers do not get
caught between the top of the paper basket and the shredder attachment.
5. Connect the mains plug to a conventional 220- 240 volt AC power socket.
Important notice: The device is fitted with a release mechanism which stops the device from
functioning if it is not being operated correctly with the paper basket provided. The unit must
be flush with the edge of the paper basket with the extensions locking into the device to
enable it to function. If this does not occur, re-position the device on the paper basket or place
it the other way around until you hear a faint click.
Operating the shredder:
A switch is located on the top of the device and can be set in three (3) positions.
1. AUTO position: the cutting process is automatically initiated as soon as paper, a CD/DVD or
credit card is inserted into the corresponding input slot. Please do not insert any CDs/DVDs
or credit cards into the input slot while shredding paper since the device is incapable of
shredding of paper at the same time as CDs/DVDs or credit cards. Once the chosen
material has fully passed through the cutting unit, the cutting process will stop
automatically.
2. REV is used to fix paper blockages. This changes the cutting direction before an operating
cycle has ended enabling the blades to be released. If you realise that you have
unintentionally inserted too much paper, and the shredding process becomes noticeably
slower, set the switch to this position.
3. The switch should be set to if you wish to empty the paper basket, or do not intend “ ” OFF
to use the device for an extended period. After doing so, unplug the device from the power
supply.
The device is only intended for personal use indoors and for a short operation period of a
maximum of 2 minutes. Do not use the shredder for commercial purposes or outdoors.

Especificaciones del producto

Marca: Digitus
Categoría: trituradora de papel
Modelo: DA-81608

¿Necesitas ayuda?

Si necesitas ayuda con Digitus DA-81608 haz una pregunta a continuación y otros usuarios te responderán


trituradora de papel Digitus Manuales

Digitus

Digitus DA-81608 Manual de Usario

11 Septiembre 2024

trituradora de papel Manuales

Últimos trituradora de papel Manuales

Olympia

Olympia PS 58 CC Manual de Usario

27 Octubre 2024
Olympia

Olympia PS 53 CC Manual de Usario

27 Octubre 2024
Bonsaii

Bonsaii S123-B Manual de Usario

25 Octubre 2024
Bonsaii

Bonsaii C206-G Manual de Usario

25 Octubre 2024
Fellowes

Fellowes Powershred 79Ci Manual de Usario

15 Octubre 2024
Fellowes

Fellowes Powershred C-525 Manual de Usario

8 Octubre 2024
Fellowes

Fellowes Powershred 225i Manual de Usario

5 Octubre 2024
Nedis

Nedis PASH110BKA4 Manual de Usario

2 Octubre 2024
Fellowes

Fellowes MicroShred MS-450Cs Manual de Usario

29 Septiembre 2024
Fellowes

Fellowes P-35C Powershred Manual de Usario

24 Septiembre 2024