DJI Zenmuse H20 Manual de Usario

DJI No categorizado Zenmuse H20

Lee a continuación 📖 el manual en español para DJI Zenmuse H20 (21 páginas) en la categoría No categorizado. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/21
2020.08
v1.2
User Manual
ZENMUSE H20 SERIES
2 © 2020 DJI All Rights Reserved.
Using this Manual
Legend
Warning Important Tips
DJI Pilot App Download
The DJI Pilot app is required when using Zenmuse H20 series.
Scan the QR code to download and install the app.
Searching for Keywords
Search for keywords such as “batteryand “installto nd a topic. If you are using Adobe Acrobat
Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.
© 2020 DJI All Rights Reserved.
3
Caution
1. When not in use, store the Zenmuse H20 series in the storage case and replace the desiccant
packet as necessary to prevent fogging the lenses due to excessive ambient humidity. If the
lenses fog up, the water vapor will usually dissipate after turning on the device for a while. The
recommended storage environment is a relative humidity less than 40% at a temperature of 20±5 ℃.
2. Do not expose the infrared camera lenses to a strong energy source such as the sun, lava or laser
beam. The temperature of the observation target should not exceed 800℃, otherwise it will burn
the camera and cause permanent damage.
3. Do not place the product under direct sunlight, in areas with poor ventilation, or near a heat source
such as a heater.
4. Do not frequently power on/off the product. After it is turned off, wait at least 30 seconds before
turning back on, otherwise the product life will be affected.
5. Under stable laboratory conditions, the Zenmuse H20 series achieves an IP44 protection rating by
IEC60529 standards. However, this protection rating is not permanent and may reduce over time
after long-term use.
6. Make sure the gimbal port and gimbal surface are free from any liquid before installation.
7. Make sure the gimbal is securely installed onto the aircraft, the microSD card slot cover is clean
and rmly in place.
8. Make sure the gimbal surface is dry before opening the microSD card slot cover.
9. Do not plug or unplug the microSD card during use.
10. Do not touch the surface of the camera lenses and keep it away from hard objects, as doing so
may lead to blurred images and affect the imaging quality.
11. Clean the surface of the camera lenses with a soft, dry, clean cloth. Do not use alkaline
detergents.

Especificaciones del producto

Marca: DJI
Categoría: No categorizado
Modelo: Zenmuse H20

¿Necesitas ayuda?

Si necesitas ayuda con DJI Zenmuse H20 haz una pregunta a continuación y otros usuarios te responderán




No categorizado DJI Manuales

No categorizado Manuales

Últimos No categorizado Manuales