DOD Gonkulator Ringmod Manual de Usario

DOD sin clasificar Gonkulator Ringmod

Lee a continuación 📖 el manual en español para DOD Gonkulator Ringmod (3 páginas) en la categoría sin clasificar. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
1 3
4 5
6
7
9
8
2
1. GAIN - adjusts the amount distortion gain.
2. DIST - adjusts the distortion output level.
3. OUTPUT - adjusts the overall output level of the eect.
4. FREQ - adjusts the carrier frequency for the ring modulation eect.
5. RING - adjusts the ring modulator eect output level.
6. INPUT - connect your instrument here.
7. FOOTSWITCH - turns the eect on and o.
8. LED - turns on when the eect is enabled.
9. OUTPUT - connect to the next pedals input or to the input of your amplier.
USING GONKULATOR:
With the Gonkulator having a built-in distortion, most guitarists/
bassists will favor placing it at the beginning of their chain of
eects, so start with that placement.
A typical eects signal chain will consist of Distortion eects rst
then Modulation eects (Chorus, Flanger, Phaser, Tremolo, etc...)
next and then nally Time based eects (Delay and Reverb).
The fact that Gonkulator can also be a standalone ring modulator,
you can place it in the middle or the end of the eects chain with
good results. You can always experiment with dierent eect
placements to get it working best for your rig.
SPECIFICATIONS:
Input 1/4” TS Unbalanced - 470
Output 1/4” TS Unbalanced - 100 Ω
Current Draw 20 mA
Bypass True Bypass
Power 9VDC alkaline battery (not included)
HARMAN PS0913DC power adapter (optional)
Warranty 1 Year
DOD
10653 River Front Parkway
South Jordan, UT 84095
USA
801-566-8800 Rev A - 6/15

Especificaciones del producto

Marca: DOD
Categoría: sin clasificar
Modelo: Gonkulator Ringmod

¿Necesitas ayuda?

Si necesitas ayuda con DOD Gonkulator Ringmod haz una pregunta a continuación y otros usuarios te responderán




sin clasificar DOD Manuales

sin clasificar Manuales

Últimos sin clasificar Manuales