Dri Eaz F530 Manual de Usario

Lee a continuación 📖 el manual en español para Dri Eaz F530 (1 páginas) en la categoría purificador de aire. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
07 1916-0 C F530 1 Legend Brands, Inc.
Duct Attachment Kit
Installation Instructions
F530
LEGEND BRANDS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800- -3030 Fax: 360- -7950 932 757 LegendBrandsRestoration.com
The Duct Attachment Kit allows the user to secure layat ducting to the process air
outlet of the Revolution LGR, CMC200 and PHD200 Compact Dehumidiers.
KIT INCLUDES
Four oset screws
Four nylon spacers
Four oversize retaining washers
Four small washers
Duct retention ring
Two 10 ft. lengths of 16 in. layat ducting
TOOLS REQUIRED
Phillips screwdriver or cordless drill with Phillips bit
Scissors
INSTALLING THE OFFSET SCREWS
Place the dehumidifier on a work bench or other
suitable location.
1. Remove one of the outlet grill retaining screws
and replace it with one of the oset screws
provided. Be sure to install the spacer and
washer in the correct sequence (Fig. A). Do not
overtighten.
2. Remove three remaining screws and replace
with oset screws.
INSTALLING THE DUCTING
3. Insert the end of the layat ducting provided through the inside of the metal ring until about 3 in. (6 cm)
of ducting protrudes. Fold the ducting back over the outside of the ring.
4. Place the duct ring inside one of the oset screws behind the oversize washer. Now gently squeeze the
duct ring just enough to t the ring side the remaining three oset screws and behind the oversize in
washers.
The duct attachment is now ready for use.
TIP: The oset screws may be left in place when not using the duct ring.
TIP: Do not use more than 10 ft. of ducting. Excessive ducting lengths will reduce airow and decrease
water removal performance.
IMPORTANT
Please refer to the dehumidier Owner’s Manual for important safety, operation and
maintenance instructions for your dehumidier equipment.
Fig. A Screws and ring installation detail. :
Replace 4 grill screws with
offset screws provided in
the kit.
Note correct placement
of spacers and washers
on each screw.

Especificaciones del producto

Marca: Dri Eaz
Categoría: purificador de aire
Modelo: F530

¿Necesitas ayuda?

Si necesitas ayuda con Dri Eaz F530 haz una pregunta a continuación y otros usuarios te responderán




purificador de aire Dri Eaz Manuales

Dri Eaz

Dri Eaz F530 Manual de Usario

5 Septiembre 2024

purificador de aire Manuales

Últimos purificador de aire Manuales