Durabrand CDA1366 Manual de Usario
Durabrand
Conjunto midi
CDA1366
Lee a continuación 📖 el manual en español para Durabrand CDA1366 (2 páginas) en la categoría Conjunto midi. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK) NO USER-SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash
and arrowhead within
the triangle is a
warning sign alerting
you of "dangerous
voltage" inside the
product.
The exclamation
point within the
triangle is a warning
sign alerting you of
important instructions
accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
PORTABLE CD SYSTEM
OPERATING INSTRUCTION
Should any trouble occur, disconnect the AC power cord and refer
servicing to qualified personnel.
RATING PLATE LOCATION
The rating plate location is on the bottom of product.
SAFETY PRECAUTIONS
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
• Do not use the unit in places which are extremely hot, cold, dusty or
humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with
poor air flow, by covering it with a cloth, or by placing it on a carpet.
ON SAFETY
• When connecting and disconnecting the AC cord, grip the plug and
not the cord itself. Pulling the cord may damage it and create a
hazard.
• When you are not going to use the unit for a long period of time,
disconnect the AC power cord.
ON AC VOLTAGE
• Before use, check that the rated voltage of your unit matches your
local voltage.
• When there is condensation inside the unit, the unit may not function
normally.
• Let it stand for 1 to 2 hours before turning the power on, or gradually
heat the room up and dry the unit before use.
FCC INFORMATION (for USA)
This device complies with part 15 of FCC Rules. Operations are subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesirable operations.
This product contains a low power laser device.
CLASS 1 LASER
PRODUCT
CLASS 1 LASER PRODUCT
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM
SPECIFICATIONS
GENERAL
Power consumption: 14 W
Power source: AC 120V~60 Hz (USA and Canada)
AC 220V ~50Hz (China)
AC 220V ~60Hz (Korea)
AC 230V~50 Hz (Europe and Hong Kong)
AC 240V~50 Hz (Australia)
AC 110-120V/220-240V~50/60Hz (Others)
DC 9V (6 x "C" size or UM-2 batteries)
Specifications subject to change without notice.
TROUBLE SHOOTING TIPS
CD
Problems
System does not turn on
Disc in place but unit
won't play
RADIO
Problems
Poor FM reception
Poor AM(MW) reception
TAPE
Problems
Distorted or noisy
recording
Record button won't
depress
Solutions
• Make sure AC power plug is secure in the
outlet and inlet has power.
• Batteries may be dead. Install new batteries.
• Make sure the FUNCTION switch is set to
CD position.
• Make sure disc is clean and undamaged.
• Make sure printed side of disc is facing up.
• Make sure PAUSE mode is not activated.
• Make sure the unit is on a secure spot.
Vibration or jarring can cause the disc to
skip.
Solutions
• Electrical interference in your home can cause
poor reception. Move the unit away from
them (especially those with motors and
transformers).
• Reposition or turn the unit for better
reception.
Solutions
• Tape heads are dirty; clean them.
• Tape is damaged. Try another tape.
• Tabs on edge of cassette may be missing or
broken. If you want to record on that cassette,
cover the holes with removable tape.
CARE & MAINTENANCE
HANDLING THE COMPACT DISC
It's important that you periodically clean the laser lens:
1. Turn off the unit's power and disconnect the AC
power.
2. Open the CD door and remove the disc.
3. Clean the lens with a soft cloth or use an air blower
brush designed for cameras.
4. If you still are not able to remove dirt particles,
moisten a cotton swab with isopropyl alcohol and
gently apply to the face of the laser lens, rubbing
gently until all traces of dirt are removed.
GENERAL GUIDELINES
• Do not touch the laser lens on the CD player.
• Temperature changes can cause condensation to form on the laser lens.
If condensation forms on the lens, leave the disc compartment door
open (without disc) for an hour to remove condensation.
• Exposure to direct sunlight or extreme heat (such as inside a car parked
in the sun) can cause damage or malfunction.
• To prevent dust from reaching internal parts, keep the compartment
door closed when not using (except when necessary to remove
condensation).
Laser lens
Although the music tracks in the disc are covered with a
protective layer, it is still advisable to treat the disc
carefully. Always pick up discs by the edge and put
them back in their holders immediately after use.
IMPORTANT NOTICES:
• Should the CD door be opened before the reading of the CD is completed,
a jamming noise may occur. This can be resolved by closing the CD door
and then sliding the FUNCTION switch temporarily to TAPE.
• If an abnormal display indication or an operating problem occurs,
disconnect the AC power cord and remove the batteries. Wait at least 5
seconds, then reconnect the AC power cord or reinstall the batteries.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly wiping with a
soft cloth.
811-136691-011 Printed in China
CLEANING THE TAPE HEADS
Clean the head with a cotton bud slightly moistened
with cleaning fluid or denatured alcohol.
1. Handle
2. Cassette deck
operation controls
PAUSE button
STOP button
F.FWD button
REW button
PLAY button
RECORD button
3. CD REPEAT button
4. CD STOP button
5. CD PLAY / PAUSE button
6. CD door
AC POWER
You can power your portable stereo system by plugging the detachable AC
power cord into the AC inlet on the back of the unit and into a wall AC
power outlet.
Check that the rated voltage of your unit
matches your local voltage. Make sure that
the AC power cord is fully inserted into the
unit.
Caution: (for North America)
To prevent electrical shock, match wide blade
of plug to wide slot, fully insert.
Note : When not being used on mains the
AC Cord should be unplugged from the unit.
NAMES OF CONTROLS RADIO OPERATION
You can listen to your favourite radio stations by sliding the FUNCTION
switch to RADIO, and then
1. Slide the BAND switch to choose AM(MW) or FM.
2. Using the TUNING control to choose a desired station.
• Adjust the VOLUME.
POWERING UP
BATTERY POWER
Insert "C" size batteries in the battery compartment. Be sure that the batteries
are inserted correctly to avoid damage to the unit.
• Always remove the batteries when unit will not be used for a long period
of time, as this will cause leakage of the batteries and subsequently
damage to your unit.
• Playback will automatically come to a
stop when the batteries have no more
power. Replace all the batteries with
new ones.
• Do not mix old and new batteries. Do
not mix ALKALINE, standard
(CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
AM(MW)/FM
• Repositioning the unit to get better AM(MW)/
FM reception.
Note: After listening, slide the FUNCTION switch
to TAPE.
VOLUME
Adjust the VOLUME control of the stereo system to a desired level.
FOR PRIVATE LISTENING
Connect headphones (Ø3.5 mm stereo mini-plug) to the PHONES jack.
When headphones are connected, speakers automatically disconnected.
ADJUSTING THE SOUND
TO STOP PLAYBACK
• Press the CD STOP button to stop disc play.
TO INTERRUPT PLAYBACK
• Press the CD PLAY/PAUSE button while a CD is playing to pause
play (the CD PAUSE " " indicator will blink).
• Press the CD PLAY/PAUSE button again to resume play.
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the CD SKIP or button according to the desired
direction. Each press skips one track. During play, the first press on the
skip backwards button to the beginning of the current track.
• Playback resumes from the selected track.
TO SEARCH THROUGH TRACKS
•Keep either one of the CD SKIP or button pressed, according to the
desired direction, and release at the desired point.
REPEAT PLAY -- in play modes
This function allows one track or all tracks on a disc to be played repeatedly.
TO REPEAT THE SAME TRACK
• Press the CD REPEAT button once during playback, the REPEAT ONE
" " indicator will blink.
TO REPEAT THE WHOLE DISC
• Press the CD REPEAT button a second time to repeat all tracks, the
REPEAT ALL " " indicator will light.
TO CANCEL REPEAT PLAY
• Press the CD REPEAT button until the REPEAT indicator is turned off.
Note: Repeat play can only be done when the unit is in the play mode.
TAPE PLAYBACK
1. Slide the FUNCTION switch to TAPE.
2. Insert a cassette tape.
3. Press the cassette of PLAY button.
TO STOP PLAYBACK
• Press the cassette of STOP button.
TO FAST WIND
• Press the cassette of F.FWD or REWIND button.
• Press the cassette of STOP button to stop winding at the desired position.
RECORDING
USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.
1. Insert a cassette tape.
2. Prepare the source to be recorded and play it.
3. Press the cassette of RECORD button which also engages the cassette
of PLAY button. Recording starts immediately.
TO STOP RECORDING
Press the cassette of STOP button.
WHEN THE END OF THE TAPE IS REACHED
The tape stop and the buttons are released automatically. To record on the
other side, turn the cassette over and press the cassette of RECORD button
again.
TO ERASE A RECORDED TAPE
1. Slide the FUNCTION switch to TAPE.
2. Insert a tape with the side you want to erase facing you.
3. Press the cassette of RECORD button to start erasing.
RECORDING FROM THE RADIO
( Refer to radio operation ) RECORDING FROM A CD
( Refer to CD play )
1. Slide the FUNCTION switch to CD. " " is shown in the display.
2. Open the CD door. Place a disc in the centre with the label side up and
then close the CD door gently. The total number of tracks will show in
the display.
3. Press the CD PLAY/PAUSE button to start CD play. The CD PLAY
" " indicator will light.
• Adjust the VOLUME.
USING THE CD PLAYER
USING THE CASSETTE COMPARTMENT
7. CD display
8. CD SKIP button
9. CD SKIP button
10. Cassette compartment
11. Tuning control
12. BAND switch
13. PHONES jack
14. VOLUME control
15. FUNCTION switch
16. AC socket
To AC inlet
To wall AC outlet
Play " " indicator
Pause " " indicator
Repeat all " " indicator
Repeat one " " indicator
Track number
1
2
3
4
5
13
14
15
16
6
7
8
9
10
11
12
Especificaciones del producto
| Marca: | Durabrand |
| Categoría: | Conjunto midi |
| Modelo: | CDA1366 |
¿Necesitas ayuda?
Si necesitas ayuda con Durabrand CDA1366 haz una pregunta a continuación y otros usuarios te responderán
Conjunto midi Durabrand Manuales
8 Septiembre 2024
Conjunto midi Manuales
Últimos Conjunto midi Manuales
8 Septiembre 2024
3 Septiembre 2024
11 Julio 2024