Durkopp Adler 1280-5 Manual de Usario
Durkopp Adler
máquina de coser
1280-5
Lee a continuación 📖 el manual en español para Durkopp Adler 1280-5 (77 páginas) en la categoría máquina de coser. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/77
1280/5
En gi nee red se wing sta ti on for
closing long se ams
Operating instructions
Installation instructions
Service instructions
Frohn rad stra ße 10, D-63768 Hös bach
Telefon Ser vice +49 (0) 60 21/ 50 19 40 Telefax +49 (0) 60 21/ 54 00 61 E-mail: Vertrieb@beis ler-gmbh.de
1
2
3
Aus ga be / Edi ti on: 06/2005 Prin ted in Fe de ral Re pub lic of Ger ma ny Tei le-Nr.:/Part-No.:
Foreword
This instruction manual is intended to help the user to become familiar
with the machine and take advantage of its application possibilities in
accordance with the recommendations.
The instruction manual contains important information on how to
operate the machine securely, properly and economically. Observation
of the instructions eliminates danger, reduces costs for repair and
down-times, and increases the reliability and life of the machine.
The instruction manual is intended to complement existing national
accident prevention and environment protection regulations.
The instruction manual must always be available at the
machine/sewing unit.
The instruction manual must be read and applied by any person that is
authorized to work on the machine/sewing unit. This means:
– Operation, including equipping, troubleshooting during the work
cycle, removing of fabric waste,
– Service (maintenance, inspection, repair and/or
– Transport.
The user also has to assure that only authorized personnel work on
the machine.
The user is obliged to check the machine at least once per shift for
apparent damages and to immediatly report any changes (including
the performance in service), which impair the safety.
The user company must ensure that the machine is only operated in
perfect working order.
Never remove or disable any safety devices.
If safety devices need to be removed for equipping, repairing or
maintaining, the safety devices must be
remounted directly after completion of the maintenance and repair
work.
Unauthorized modification of the machine rules out liability of the
manufacturer for damage resulting from this.
Observe all safety and danger recommendations on the machine/unit!
The yellow-and-black striped surfaces designate permanend danger
areas, eg danger of squashing, cutting, shearing or collision.
Besides the recommendations in this instruction manual also observe
the general safety and accident prevention regulations!
General safety instructions
The non-observance of the following safety instructions can cause
bodily injuries or damages to the machine.
1. The machine must only be commissioned in full knowledge of the
instruction book and operated by persons with appropriate
training.
2. Before putting into service also read the safety rules and
instructions of the motor supplier.
3. The machine must be used only for the purpose intended. Use of
the machine without the safety devices is not permitted. Observe
all the relevant safety regulations.
4. When gauge parts are exchanged (e.g. needle, presser foot,
needle plate, feed dog and bobbin) when threading, when the
workplace is left, and during service work, the machine must be
disconnected from the mains by switching off the master switch or
disconnecting the mains plug.
5. Daily servicing work must be carried out only by appropriately
trained persons.
6. Repairs, conversion and special maintenance work must only be
carried out by technicians or persons with appropriate training.
7. For service or repair work on pneumatic systems, disconnect the
machine from the compressed air supply system (max. 7-10 bar).
Before disconnecting, reduce the pressure of the maintenance
unit.
Exceptions to this are only adjustments and functions checks
made by appropriately trained technicians.
8. Work on the electrical equipment must be carried out only by
electricians or appropriately trained persons.
9. Work on parts and systems under electric current is not permitted,
except as specified in regulations DIN VDE 0105.
10. Conversion or changes to the machine must be authorized by us
and made only in adherence to all safety regulations.
11. For repairs, only replacement parts approved by us must be used.
12. Commissioning of the sewing head is prohibited until such time
as the entire sewing unit is found to comply with EC directives.
It is absolutely necessary to respect
the safety instructions marked by these signs.
Danger of bodily injuries !
Please note also the general safety instructions.
Especificaciones del producto
| Marca: | Durkopp Adler |
| Categoría: | máquina de coser |
| Modelo: | 1280-5 |
¿Necesitas ayuda?
Si necesitas ayuda con Durkopp Adler 1280-5 haz una pregunta a continuación y otros usuarios te responderán
máquina de coser Durkopp Adler Manuales
20 Octubre 2024
17 Octubre 2024
17 Octubre 2024
13 Octubre 2024
11 Octubre 2024
6 Octubre 2024
28 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024
15 Septiembre 2024
máquina de coser Manuales
- máquina de coser AEG
- máquina de coser Ambiano
- máquina de coser Alfa
- máquina de coser Brother
- máquina de coser Sinbo
- máquina de coser Jata
- máquina de coser Emerio
- máquina de coser Singer
- máquina de coser Bernina
- máquina de coser Pfaff
- máquina de coser Juki
- máquina de coser Elna
- máquina de coser Mellerware
- máquina de coser Termozeta
- máquina de coser Jocca
- máquina de coser Toyota
- máquina de coser Husqvarna
- máquina de coser Bernette
- máquina de coser Janome
- máquina de coser Necchi
- máquina de coser Yamato
- máquina de coser Kayser
- máquina de coser RCE
- máquina de coser Veritas
- máquina de coser Union Special
- máquina de coser Easy Home
- máquina de coser Vendomatic
- máquina de coser Baby Lock
- máquina de coser Empisal
- máquina de coser Lewenstein
- máquina de coser Meister Craft
- máquina de coser Yamata
- máquina de coser Weasy
- máquina de coser Victoria
- máquina de coser Prince
- máquina de coser Muller
- máquina de coser Sinojo
- máquina de coser Huskystar
- máquina de coser Gritzner
- máquina de coser W6
- máquina de coser Prixton
- máquina de coser Feiyue
- máquina de coser Husqvarna-Viking
- máquina de coser SteamMax
Últimos máquina de coser Manuales
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
20 Octubre 2024