Dymo P3 Manual de Usario

Lee a continuación 📖 el manual en español para Dymo P3 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Digital Postal Scale User Guide
Guide d'utilisation de la Balance postale numérique
1
DYMO® Digital Postal Scale
This User Guide provides instructions for
using your DYMO® Digital Postal Scale.
Visit www.dymo.com/register to register
your scale.
Setting Up the Scale
The scale is powered by three AAA batteries.
To set up the scale
1. Unpack the scale.
2. Set the scale on a firm, flat surface.
Inserting the Batteries
The scale uses three AAA alkaline batteries. The scale automatically
turns off after three minutes of inactivity.
To insert the battery
1. Turn the scale over.
2. Remove the battery compartment cover.
3. Insert three AAA batteries as shown.
Make sure to insert the batteries correctly. Inserting the
batteries backwards can damage the scale.
4. Replace battery compartment cover.
Remove the batteries if the scale will not be used for a long
period of time.
Turning On the Power
The scale has an Auto Shut Off feature which automatically turns off the scale after three
minutes of inactivity.
To turn the scale on
Press on the front of the scale.
When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing
items. The display shows 0 g 0.00 oz , 0.0 oz, or when ready.
To turn the scale off
Press on the front of the scale to turn the scale off.
The scale turns off automatically after three minutes of inactivity.
0.0
TARE
kg lb
HOLD
Power
LCD
display Kg/Lb Hold
Tare/
Zero
AAA
AAA
AAA
!
!
2
Using the Scale
Always wait for 0 g 0.00 oz, 0.0 oz, or to display before placing
an item on the scale platform.
After placing an item on the scale, wait for several seconds for
the weight to appear. When the scale is ready, a o appears to the
left of the weight.
To weigh an item
Place an item on the scale platform.
Using the Tare Feature
You can weigh small items or items that cannot be easily placed on the scale platform by
placing the items in a container and using the Tare/Zero button to eliminate the weight of
the container.
To use the tare feature
1. Place an empty container on the platform.
2. When the scale is ready, press .
The display is set to zero.
3. Place the items to be weighed in the container.
The display shows the weight of the items, without the weight of the container.
4. After removing the container, press to reset the scale to zero.
Using the Hold Feature
When an item being weighed extends over the front of the scale and you cannot see the
display, you can freeze the display so that the weight is still displayed after removing the item.
To use the Hold feature
1. Press .
The display shows and then HOLD
0 g, 0.0 oz, or 0.00 oz w
hen ready.
2. Place the item on the scale.
3. After a few seconds, remove the item from the scale.
The weight continues to be displayed for about ten seconds.
Changing the Units of Measure
Your scale can display weight in English (pounds) or metric (kilograms) units. The default unit
of measure is Englishmetric. Each time you turn on the scale, the scale defaults to the unit of
measure that was last used.
To change the units of measure
Press to toggle between English and metric units.
0.0
TARE
0.0
TARE
HOLD
kg lb

Especificaciones del producto

Marca: Dymo
Categoría: No categorizado
Modelo: P3

¿Necesitas ayuda?

Si necesitas ayuda con Dymo P3 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Dymo Manuales

No categorizado Manuales

Últimos No categorizado Manuales