Dynacord L1300FD DSP Manual de Usario

Dynacord receptor L1300FD DSP

Lee a continuación 📖 el manual en español para Dynacord L1300FD DSP (5 páginas) en la categoría receptor. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
Engineering Data Sheet | L1300FD DSP power amplifier 2x650W
L1300FD DSP power amplifier 2x650W
L1300FD DSP power amplifier 2x650W
Live performance DSP amplifier
Fully integrated professional speaker processing
with FIR Drive technology
Market leading acoustic performance and rock solid
reliability
True 2 ohm stability
Intuitive system control software, makes setup and
control easy
Technical specifications
Load Impedance
Load Impedance
Load Impedance
Load ImpedanceLoad Impedance 2 Ω 2.6 Ω 4 Ω 8 Ω
Maximum Output
Maximum Output
Maximum Output
Maximum OutputMaximum Output
Power,
Power,
Power,
Power, Power, Single
Channel
1100 W 950 W 660 W 350 W
Maximum Output
Maximum Output
Maximum Output
Maximum OutputMaximum Output
Power,
Power,
Power,
Power, Power, Dual
Channel
1000 W 850 W 600 W 320 W
Maximum Output
Maximum Output
Maximum Output
Maximum OutputMaximum Output
Power,
Power,
Power,
Power, Power, Bridged
- - 2000 W 1200 W
Maximum RMS
Maximum RMS
Maximum RMS
Maximum RMSMaximum RMS
Voltage Swing
Voltage Swing
Voltage Swing
Voltage SwingVoltage Swing
THD = 1%, 1 kHz
55.3 V
Voltage Gain
Voltage Gain
Voltage Gain
Voltage GainVoltage Gain
Ref.1 kHz
32.0 dB
THD
THD
THD
THDTHD at 450 W/4 Ω
MBW = 80 kHz, 1
kHz
< 0.05%
IMD-SMPTE
IMD-SMPTE
IMD-SMPTE
IMD-SMPTEIMD-SMPTE,
60 Hz, 7 kHz
< 0.1%
DIM30
DIM30
DIM30
DIM30DIM30,
3.15 kHz, 15 kHz
< 0.05%
Maximum Input
Maximum Input
Maximum Input
Maximum InputMaximum Input
Level
Level
Level
LevelLevel
+21 dBu
Crosstalk
Crosstalk
Crosstalk
CrosstalkCrosstalk
ref. 1 kHz, at 100
W/4 Ω
< -80 dB
Frequency
Frequency
Frequency
FrequencyFrequency
Response
Response
Response
ResponseResponse,
ref. 1 kHz
10 Hz to 21 kHz (±1 dB)
Input Impedance
Input Impedance
Input Impedance
Input ImpedanceInput Impedance,
Active Balanced
20 k Ω
Signal to Noise Ratio
Signal to Noise Ratio
Signal to Noise Ratio
Signal to Noise RatioSignal to Noise Ratio
Amplifier,
Amplifier,
Amplifier,
Amplifier, Amplifier,
A-weighted, ref to
Max. Output Power
@ 8 Ω
>104 dB
Output Noise
Output Noise
Output Noise
Output NoiseOutput Noise,
A-weighted
< -68 dBu
Output Stage
Output Stage
Output Stage
Output StageOutput Stage
Topology
Topology
Topology
TopologyTopology
Class AB
Power
Power
Power
PowerPower
Requirements
Requirements
Requirements
RequirementsRequirements
240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz
(factory configured)
Power Consumption
Power Consumption
Power Consumption
Power ConsumptionPower Consumption
1/8 Maximum
Output Power @ 4 Ω
550 W
Mains Fuse
Mains Fuse
Mains Fuse
Mains FuseMains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH
Protection
Protection
Protection
ProtectionProtection Audio limiters, high temperature, DC, HF,
Back-EMF, Peak current limiters, Inrush current
limiters, Turn on delay
Cooling
Cooling
Cooling
CoolingCooling Front-to-rear, 3-stage-fans
Ambient
Ambient
Ambient
AmbientAmbient
Temperature Limits
Temperature Limits
Temperature Limits
Temperature LimitsTemperature Limits
+5°C to +40°C (40°F to +105°F)
Safety Class
Safety Class
Safety Class
Safety ClassSafety Class I
Color
Color
Color
ColorColor Black
Dimensions
Dimensions
Dimensions
DimensionsDimensions
(W x H x D), mm
483 x 88 x 462.4
Weight
Weight
Weight
WeightWeight 12.9 kg (28.4 lb)
Signal Processing
Signal Processing
Signal Processing
Signal ProcessingSignal Processing FIR Filters, Audio Limiters
Output delay per channel,
31 band GEQ per channel,
PEQ per channel,
Load impedance
Optional
Optional
Optional
OptionalOptional PC remote control software
Test signal for max. output power according IHF-A-202
(Dynamic-Headroom, burst 1 kHz/20 ms on/480 ms
off/low level -20 dBu).
Input power exceeds 1.1 times rated power
consumption with 2 Ω load in Dual mode or 4 Ω load
in Bridged mode.
2 | L1300FD DSP power amplifier 2x650W
462.4 mm [18.20”] 483 mm [19.02”]
88 mm
[3.47”]
438 mm [17.24”]
148.2 mm
[16.47”]
462.4 mm
[18.20”]
438 mm [17.24”]
462.4 mm [18.20”]
Dimensions
3 | L1300FD DSP power amplifier 2x650W

Especificaciones del producto

Marca: Dynacord
Categoría: receptor
Modelo: L1300FD DSP

¿Necesitas ayuda?

Si necesitas ayuda con Dynacord L1300FD DSP haz una pregunta a continuación y otros usuarios te responderán




receptor Dynacord Manuales

receptor Manuales

Últimos receptor Manuales