Earthworks SR30 Manual de Usario

Lee a continuación 📖 el manual en español para Earthworks SR30 (2 páginas) en la categoría micrófono. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Product Registration
To help you get the most out of your
Earthworks purchase, please take a moment
and register your product with us online at
earthworksaudio.com/register.
Service & Repair
If you have any problems with your Earthworks
products, please contact our Service & Repair
Department.
Email: returns@earthworksaudio.com
Telephone: (603) 654-2433, ext. 119
MADE IN USA
Printed in USA
User’s Guide
earthworksaudio.com
July 11, 2018
Pin 1
“Shield”
Pin 2
“+”
Pin 3
“ ”-
Description
The Earthworks SR30 is a directional pre-polarized con-
denser microphone with a rst-order cardioid pickup pat-
tern directly coupled to a dedicated wideband, low out-
put impedance transformerless preamplier. The SR30
requires a standard 24-48V Phantom Power supply. It
features a frequency response from 20Hz to 30kHz, fast
impulse response, very low handling noise, uniform po-
lar pattern, and high SPL handling capabilities. It pro-
vides excellent uncolored rejection of sounds arriving
off-axis.
Each microphone is delivered with its own calibration
chart providing the individually measured frequency re-
sponse curve. A mounting clip is included with the mi-
crophone.
Applications
The Earthworks SR30 is easy to operate. Connect the
microphone to a microphone preamplier supplying 24-
48V phantom power using a standard XLR microphone
cable. Please allow up to one minute for the microphone
to settle. Plugging in the microphone “hot” (phantom
power already present at the input) will not damage the
microphone, and is actually preferred for faster settling.
It is normal for any phantom powered mic to “pop” when
plugged in or powered up. Make sure to mute the signal
to speakers or headphones when phantom power is rst
applied.
The excellent performance characteristics of the SR30
make it ideal for a wide range of applications. In the
studio or on stage the SR30 is an ideal choice for a va-
riety of instruments including sax, ute, trumpet, guitar,
piano, and percussion. It is superior for choir because
it doesn’t spotlight. Rather, it picks up an entire section
with no hot spots. The SR30 is popular among concert
tapers because of its open uncolored sound and among
jazz enthusiasts for its ability to capture explosive per-
formances while retaining the subtle nuances of artistic
expression.
This microphone has no removable parts.
Care of Microphone
The Earthworks SR30 microphone is a precision instru-
ment designed and built to provide years of top perfor-
mance. Following these simple rules will help to protect
your investment in the SR30:
Avoid touching the front protective screen.
Never attempt to disassemble the microphone –
it cannot be opened.
Avoid extreme heat and condensing humidity.
Allow the microphone to warm up in the case when
bringing it in from the cold weather.
Rough handling may damage the microphone even
if no visible marks are left.
When not in use keep the SR30 in its case.
XLR Output Connector Assignment of SR30
Specications
Frequency response: 20Hz to 30kHz
Polar Pattern: Cardioid
Sensitivity: 20mV/Pa (-34dBV/Pa)
Power Requirements: 24-48V Phantom, 10mA
Peak Acoustic Input: 139dB SPL
Output: XLR-3
Output Impedance: 65Ω, balanced between pins 2 & 3
Minimum Load: 600Ω btw. pins 2 & 3
Noise: 16dB, A equivalent
Dimensions L x D: 229 x 22 mm (9 x .860 in.)
Weight: 225g (.5lb)
Impulse Response of SR30 (typical)
Polar Response of SR30 (typical)
Frequency Response of SR30 (typical)
Specications are subject to change without notice.

Especificaciones del producto

Marca: Earthworks
Categoría: micrófono
Modelo: SR30

¿Necesitas ayuda?

Si necesitas ayuda con Earthworks SR30 haz una pregunta a continuación y otros usuarios te responderán




micrófono Earthworks Manuales

micrófono Manuales

Últimos micrófono Manuales