EAT B-Sharp Manual de Usario

EAT tocadiscos B-Sharp

Lee a continuación 📖 el manual en español para EAT B-Sharp (19 páginas) en la categoría tocadiscos. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/19
European Audio Team
INSTRUCTIONS FOR USE
E.A.T. B-Sharp
2
Dear Music Lover,
Congratulations and thank you for choosing European Audio Products. Your
E.A.T. B-Sharp turntable has been handcrafted and rigorously tested by skilled technicians
at the European Audio Team factory to give you years of enjoyable, trouble free service.
Although it may seem like asking for driving directions, please take a few moments
to read all of this manual. It has many helpful tips and ideas on properly setting up
and using your system. We promise that if you take the time to read and follow these
tips you’ll get better system performance and enjoyment. Please contact your dealer if
you require additional assistance.
The B-Sharp incorporates an array of features that contribute to its audiophile performance:
1. Proprietary ultralow noise AC motor and high precision frequency DC-driven AC
generator for speed stability. The motor is fixed on the main chassis. The tonearm
and platter are mounted on a separate suspended MDF chassis.
2. The platter with TPE damping and felt mat sits on top of a belt-holding sub-
platter. The platter is constructed from an aluminum magnesium alloy sitting on a
brass bearing.
3. The tonearm construction is a combinaton of conical carbon fibre tube, sandwich
aluminium headshell, cardan bearing in horizontal axle with hardened tips sitting in
zircon bowl and ABEC7 ballraces in vertical axle. The counterweight is damped with
thermo-plastic elastomer (TPE) damping pad.
4. All key features for cartridge alignment and adjustability are available on the tonearm
- VTA/SRA, VTF, azimuth, anti-skate, and a slotted aluminum headshell for overhang
and offset angle.
5. The conical thermo-plastic elastomers (TPE) suspension system dampens vibrations.
6. A low-profile sandwich floating chassis made of MDF is what gives this table
a "superflat" silhouette.
Important:
Your turntable was shipped partially disassembled in order to avoid damage to
sensitive parts.
Please check immediately to make sure that neither the packaging nor
the device was damaged in
transit. If you are missing parts or if the unit is damaged,
please do not operate and contact your
dealer.
Throughout the manual, this symbol will alert you to potential hazards for the user or the unit,
and how to avoid possible misuse.
!
3
Contents
Packaging layout 4
Product illustrations and key 5-6
Setup
1. Transport screws 7
2. Platter, sub-platter and drive belt installation 8
3. Adjusting the pulley height 8-9
4. Tonearm assembly 9
a) Cartridge installation 10
b) Counterweight assembly 10
c) Vertical Tracking Force setting (VTF) 11
d) Tonearm output connection 12
e) Vertical Tracking Angle setting (VTA) 12
f) Azimuth setting 13
g) Anti-skating assembly and adjustment 14-15
5. Leveling the turntable 16
6. Using the record clamp, starting the motor, changing the speed 16
Technical specifications 18
Troubleshooting, warranty, service 19

Especificaciones del producto

Marca: EAT
Categoría: tocadiscos
Modelo: B-Sharp

¿Necesitas ayuda?

Si necesitas ayuda con EAT B-Sharp haz una pregunta a continuación y otros usuarios te responderán




tocadiscos EAT Manuales

EAT

EAT C-Sharp Manual de Usario

13 Septiembre 2024
EAT

EAT B-Sharp Manual de Usario

13 Septiembre 2024
EAT

EAT E-Flat Manual de Usario

13 Septiembre 2024

tocadiscos Manuales

Últimos tocadiscos Manuales