EBS Metal Drive II Manual de Usario

EBS No categorizado Metal Drive II

Lee a continuación 📖 el manual en español para EBS Metal Drive II (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

USERS MANUAL

B L SLACK ABEL ERIES

EBS M DETAL RIVE

SAMPLE OUND ETTINGSS S

The following examples below show a few of the many sonic

possibilities of the EBS MetalDrive.

MODERN METAL

FULL METAL DRIVE

METAL OVERDRIVE

MY PERSONAL SOUND

The tubesim mode activates the second tube

simulator giving higher compression, less

attack and tube-like sounds. This position is

useful for edging up your sound while

obtaining the warmth and body of the classical

vintage tubes.

his is the fullrange distortion mode, useful for

affecting the overall sound. This mode gives

less low end with harder compression and gives

the possibility to create fuzz-like sound when

tweaking the Dist

his is an example of a standard distortion

setting with a good clean edgy sound together

with untouched low end for better definition.

Use high setting for Dist and compensate the

level with the Output

Thank you for purchasing the

is an ultra compact and

robust box, capable of producing high gain

distortion and many other useful mean

“tubeamp”, distorted sounds. The overdrive

engine that makes this all possible is a

simulation circuit

, which emulates a classic vintage style

preamp tube. The EBS MetalDrives’ high quality

makes this pedal a perfect choice for the

recording environment, as well as live

playing.

pedal.

in pure class A with a wide gain

range

EBS Black Label MetalDrive pedal!

The EBS MetalDrive

We hope you'll enjoy using the

EBS MetalDrive

TUBESIM

STANDARD

FLAT

- Activates the second tube simulator, which adds

extra harmonics with added compression and slightly less high

end attack. Very useful when using moderate Dist setting for

tightening up your sound. Otherwise this mode works the

same as standard mode.

(STD) - This mode selects the standard operation

for the pedal. It bypasses the low end for excellent bass

response. Very high gain settings are possible and very useful,

with great dynamics and typical tube-like sounds.

- This position selects linear gain across the entire audio

spectrum. Useful for heavily distorted bass sound. This mode

also produces some fuzz-like sounds when used with high Dist

setting.

I LEDNDICATOR

Indicates when the pedal is active.

This LED should glow when the pedal in switched on. When this LED stops

lighting you should replace the battery as soon as possible.

F SOOT WITCH

Switches the pedal on or off. This switch is a TRUE BYPASS SWITCH for optimum

performance.

T CHE ONTROLS

- Controls the output

volume when the

pedal is active.

You can also use this

control to boost your

sound.

- Controls the amount

of gain and distortion

for the “distortion

engine”. The gain

ranges from half clean

up to

in maximum

position.

very distorted

sound

EBS PROFESSIONAL BASS EQUIPMENT

H C BOW TO HANGE ATTERY

1) Carefully remove the four screws holding the bottom plate.

2) Remove the bottom plate gently.

3) Replace the old battery with a new one of the same type, 9V alkaline

type; 6LR61.

4) Gently place back the bottom plate, and make sure no cables are

squeezed. Attach the four mounting screws using moderate tension.

The EBS Phantom Power System™ makes it

possible to power the EBS MetalDrive with 9V

DC directly from the EBS NeoDrome,

NeoGorm, Fafner, HD350 and TD650 amps.

Here is a step-by-step instruction on how to do

H EBS P P ™OW TO USE THE HANTOM OWER

1) Connect a stereo ¼” instrument cable (TRS, tip-ring-sleeve) between

the EBS MetalDrive pedal and the EBS amp.

2) Activate the phantom power on the amp. This is made with a flick of

a switch on most EBS amps. Please consult the manual for the EBS

amp you are using.

3) Connection done. You should now have power in the pedal, even if

the input jack is left open.

EBS P P T SHANTOM OWER ROUBLE HOOTING™

Note that only the pedal that is directly connected to the EBS amp can be powered

with phantom power. This means that if you have more than one pedal, ONLY THE

LAST one can use the EBS Phantom Power™.

Checkpoint

1) Is a ¼” STEREO cable used between

the pedal and the amp?

2) Is there power available on the

RING connection of the ¼” plug?

T S GROUBLE HOOTING UIDE

Please consult the following checkpoints, before consulting one of the

authorized EBS service centers.

*EBS Sweden AB guarantees no error free operation when using a DC

adapter other than the EBS AD-9. Warranty is void if higher voltage than

9.3 V has been used to power the EBS MetalDrive pedal.

Action if answered NO

- Replace cable to a ¼” STEREO cable.

- Make sure the phantom power is

activated on the amp.

- Check cable.

Checkpoint

1) Does the cable(s) work

properly?

2) Are the ¼” plugs properly

connected all the way in?

3) Are the Instrument cable

attached to the Right (input)

jack, and the Amp cable

connected to the Left (output)

jack?

4) Does the pedal have a battery,

and is the battery OK?

5) Does the indicator LED light

When pressing the foot switch

alternatively?

6) Does the instrument work?

7) Does the amplifier work and is

the volume turned up?

8) If you are using a DC adapter,

Are you using an EBS AD-9?

Action if answered NO

- Replace cable(s).

- Push the ¼” plugs all the way in.

- Reconnect input and output jacks.

- Put a new battery in the pedal.

- Replace battery.

- Check the instrument at your

nearest service center.

- Turn up volume or check the amp

at your nearest service center.

- Check the voltage and polarity of

the adapter you are using.*

TECHNICAL SPECIFICATIONS ETALEBS M DRIVE

Nominal Input Level - 8 dBv

Power Requirements 9 V DC Regulated,

18 mA max*.

Dimensions Width

Height

Depth ( )

Weight 480g (1.07 lb.)

Input Impedance 700 kohms

Dry Bandwidth +0/-3 dB 20 - 20k Hz

Effect Bandwidth +0/-3 dB 60 - 7k Hz

Dist Gain Range 6 - 70 dB min

Types Standard, Flat or

Tubesim Mode

70 mm (2.8")

115 mm (4.5")

35 mm 1.4"

Specifications are subject to change without notice.

EBS Sweden AB · Grindstuvägen 44-46 · SE-16733 Bromma · Sweden

Phone: +46-8-7350010 · Fax: +46-8-7350005

Web: http://www.ebssweden.com

E-mail: ebs.info@bass.se

U HSEFUL INTS

In order to obtain best possible performance and operation from

the EBS MetalDrive, check the hints below on how to improve and

find your own personal sound.

1) Try using the MetalDrive pedal as one of the first pedals

in your effects chain. This is because the gain stage will

amplify every small noise from other pedals being used

before the MetalDrive.

2) The MetalDrive is excellent for use in an effects loop. In

this setup you can use the pedal as a post-filter

enhancement stage. It could be a good choice to make

your solid state amplifier sound like a full tube amp.

*EBS recommends the use of the EBS AD-9 power supply,

which supplies a well stabilized power to the EBS MetalDrive

and all your other pedals that operate with a 9V battery. The

high current capacity, 650mA, makes it possible to supply all

pedals with only one adapter, EBS AD-9!

GND PH.

POWER.

SIGNAL

Especificaciones del producto

Marca:	EBS
Categoría:	No categorizado
Modelo:	Metal Drive II
Color del producto:	Zwart
Peso.:	1540 g
Ancho:	280 mm
Profundidad:	179 mm
Altura:	44 mm
Peso del embalaje:	1840 g
Ancho del embalaje:	370 mm
Empaquetadura en profundidad:	230 mm
Altura del embalaje:	80 mm
Manual de usuario:	Ja
Material de la carcasa:	Metaal
Fuente-de-alimentación:	AC
Indicadores LED:	Ja
País de origen:	China
Código arancelario comercial del Reino Unido:	85176200
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Estándar de red:	IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Adecuado para uso en exteriores:	Nee
Tipo de interfaz Ethernet:	Gigabit Ethernet
Fuente de alimentación incluida:	Ja
VLAN=soporte:	Ja
Alimentación a través de Ethernet (PoE):	Nee
Apilable:	Nee
Capacidad de conmutación:	48 Gbit/s
Dirección MAC:	8000 entries
soporte 10G:	Nee
Gestión del flujo de datos:	Ja
Tipo de interruptor:	Unmanaged
Número de puertos Ethernet RJ-45 de conmutación básica:	24
Número de puertos Gigabit Ethernet (cobre):	24
Enchufe de red:	AC-in-aansluiting
Tipo de conmutación básica de puertos Ethernet RJ-45:	Gigabit Ethernet (10/100/1000)
Almacenamiento de búfer de paquetes:	4.1 MB
Compatibilidad con tramas gigantes:	Ja
Duplex completo:	Ja
Volumen de embalaje:	6808 cm³
Velocidad de envío:	35.7 Mpps
Marcos gigantes:	9216
Resistente al vandalismo:	Nee
Medio duplex:	Ja