EdgeCraft Chef-s Choice - EdgeSelect-Pro 125 Manual de Usario

EdgeCraft Afilador de cuchillos Chef-s Choice - EdgeSelect-Pro 125

Lee a continuación 📖 el manual en español para EdgeCraft Chef-s Choice - EdgeSelect-Pro 125 (12 páginas) en la categoría Afilador de cuchillos. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

instruction manual

EdgeSelect-Pro™ Diamond Hone®

Knife Sharpener Model 125

Read instructions before use.

It is essential that you follow these

instructions to achieve optimal results.

imPortant saFEGuarDs

When using electrical appliances, basic safety precautions should always be

followed including the following:

1. Read all instructions.

2. To protect against electrical hazards, do not immerse the Chef’sChoice® Knife

Sharpener in water or other liquid.

3. Make sure only clean knife blades are inserted in the Chef’sChoice® Knife Sharpener.

4. Unplug from outlet when not in use, before putting on or taking off parts and

before cleaning.

5. Avoid contacting moving parts.

6. Do not operate any appliance with a damaged cord or plug or after the appliance

malfunctions, or is dropped or damaged in any manner.

U.S. customers: You may return your sharpener to EdgeCraft Corporation for service

where the cost of repair or electrical or mechanical adjustment can be estimated. When

the electrical cord on this appliance is damaged, it must be replaced by EdgeCraft

Corporation or other qualiﬁed service to avoid the danger of electrical shock.

Outside U.S.: Please return your sharpener to your local distributor where the cost of repair

or electrical or mechanical adjustment can be estimated. If the supply cord of this

appliance is damaged, it must be replaced by a repair facility appointed by the

manufacturer because special tools are required. Please consult your EdgeCraft

Corporation distributor.

7. CAUTION! This appliance may be ﬁtted with a polarized plug (one blade is wider than

the other). To reduce the risk of electric shock, this plug will ﬁt in a polarized outlet

only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does

not ﬁt, contact a qualiﬁed electrician. Do not modify the plug in any way.

8. The use of attachments not recommended or sold by EdgeCraft Corporation may

cause ﬁre, electric shock or injury.

9. The Chef’sChoice® EdgeSelect-Pro™ Knife Sharpener is designed to sharpen kitchen

knives, pocket knives and most sports knives. Do not attempt to sharpen scissors,

ax blades or any blade that does not ﬁt freely in the slots.

10. Do not let the cord hang over edge of table or counter or touch hot surfaces.

11. When in the “ON” position (Red ﬂash on switch is exposed when “on”) the

Chef’sChoice® Knife Sharpener should always be on a stable countertop or table.

12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR CHEF’SCHOICE® KNIFE

SHARPENER WILL BE SHARPER THAN YOU EXPECT. TO AVOID INJURY, USE AND

HANDLE THEM WITH EXTREME CARE. DO NOT CUT TOWARD ANY PART OF YOUR

FINGERS, HAND OR BODY. DO NOT RUN FINGER ALONG EDGE. STORE IN A SAFE MANNER.

13. Do not use outdoors.

14. Close supervision is necessary when any appliance is used by or near children.

15. Do not use honing oils, water or any other lubricant with the Chef’sChoice®

EdgeSelect-Pro™ Diamond Hone® Knife Sharpener.

16. SAVE THESE INSTRUCTIONS.

You maDE

a GooD

choicE

Professional chefs and serious cooks rely on the Chef’sChoice®

EdgeSelect-Pro™ Diamond Hone® Knife Sharpener Model 125

to maintain high performance edges on their favorite knives.

With your Chef’sChoice® Knife Sharpener you will share the same profes-

sional advantage with knives of astonishing sharpness and durability.

The Chef’sChoice® Knife Sharpener incorporates the latest sharpening

technology, to create advanced performance edges on all your ﬁne-edge

and serrated knives.

You will ﬁnd the Chef’sChoice® Knife Sharpener extremely fast, simple

and safe to use on all quality knives. Please read this instruction booklet

thoroughly before using the sharpener to optimize your sharpening results.

Chefs acknowledge the value of a ﬁne cutting edge for elegant food

preparation. As an owner of the Chef’sChoice® EdgeSelect-Pro™ Diamond

Hone® Knife Sharpener Model 125 you have the means to create edges of

perfection, sharpness and durability previously unobtainable with even the

world’s most expensive commercial sharpening systems. You will ﬁnd it is a joy

to sharpen and use your knives but also remember, the edge is incredibly sharp!

The Chef’sChoice® EdgeSelect-Pro™ Diamond Hone® Knife Sharpener

Model 125 creates demonstrably superior multifacet edges on knives of

any steel – carbon, stainless or alloy of any hardness. Edges sharpened

on the Chef’sChoice® EdgeSelect-Pro™ Diamond Hone® Knife Sharpener

Model 125 are much sharper and stay sharp longer than conventional and

hollow ground edges.

You can easily and very quickly sharpen the entire cutting edge of your

favorite knives, from the tip to the handle or bolster. The highly precise edges

will reward you with years of superior knife performance.

Especificaciones del producto

Marca:	EdgeCraft
Categoría:	Afilador de cuchillos
Modelo:	Chef-s Choice - EdgeSelect-Pro 125
Color del producto:	Zwart
Peso.:	28000 g
Ancho:	119 mm
Profundidad:	419 mm
Altura:	318 mm
Nivel de ruido:	50 dB
Indicadores LED:	Ja
factor vorm:	Tower
Batería/Voltaje de la batería:	12 V
Número soportado de baterías/baterías:	6
Certificación:	IEC 62040-1\r\nIEC-62040-2\r\nCE
Alarma(s) audible(s):	Ja
Potencia de salida:	2400 W
Capacidad de la batería:	9 Ah
Batería/Tiempo de carga de la batería:	4 uur
Frecuencia:	47/63 Hz
Factor de potencia:	0.99
Tipo de enfriamiento:	Actief
Enchufar:	C20 stekker
Eficiencia:	90 procent
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	20 - 90 procent
Tipo-de-visualización:	LCD
Número de salidas de CA:	7 AC-uitgang(en)
Tipos de enchufes:	C13 coupler, C19 coupler
Capacidad de potencia de salida:	3 kVA
Voltaje de operación de entrada (min):	110 V
Tensión de operación interna (máx.):	300 V
Tensión de operación de salida (min):	208 V
Tensión de funcionamiento de salida (máx.):	240 V
factor de cresta:	3:1
Número de fases de entrada:	1
Tiempo típico de respaldo a media carga:	- min
Tiempo típico de respaldo con carga completa:	- min
Tensión de salida THD:	2 procent
Regulación de voltaje de salida:	1 procent
Forma de onda:	Sinus
Factor de potencia de salida:	0.8