EdgeCraft E20 Manual de Usario

Lee a continuación 📖 el manual en español para EdgeCraft E20 (24 páginas) en la categoría Afilador de cuchillos. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
H Y B R I D K N I F E S H A R P E N E R
E20 Hybrid
R E AD TH E S E IN S TR UC TI O N S BE F O R E U S E .
IT I S E S S E N TIA L TH AT YO U F O L LOW THE S E
IN S TR UC TI O N S TO AC H I E V E O P TI M UM R E S U LTS .
© 2021 The Legacy Companies
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the
EdgeCraft® Hybrid® sharpener in water or other liquid.
3. Make sure that only clean knife blades are inserted in Model E20.
4. Disconnect the appliance from its power source when not in use,
before cleaning, during service and when replacing parts.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner.
U.S. customers: You can return your sharpener to EdgeCrafts
factory for service where the cost of repair or electrical or
mechanical adjustment can be estimated. When the electrical
cord on this appliance is damaged, it must be replaced by the
Chef’sChoice® factory or other qualified service to avoid the
danger of electrical shock.
Outside U.S.: Please return your sharpener to your local
distributor where the cost of repair or electrical or mechanical
adjustment can be estimated. If the supply cord of this appliance
is damaged, it must be replaced by a repair facility appointed
by the manufacturer because special tools are required. Please
consult your EdgeCraft® distributor.
7. CAUTION! This appliance may betted with a polarized power
plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug willt in a polarized outlet only one way.
If the plug does nott fully in the outlet, reverse the plug. If it still
does nott, contact a qualified electrician. Do not modify the
plug in anyway.
English — 2
8. The use of attachments not recommended or sold by The
Legacy Companies may causere, electric shock or injury.
9. The EdgeCraft® Hybrid® sharpener is designed to sharpen
American, European, and Asian style knives as described in
following sections. Do not attempt to sharpen scissors, ax blades
or any blade that does not fit freely in the slots.
10. Do not let the cord hang over edge of table or counter or touch
hot surfaces.
11. When in the “ON” position (Red flash on switch is exposed when
“ON”), the EdgeCraft® sharpener should always be on a stable
countertop or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR
EdgeCraft® Hybrid® SHARPENER WILL BE SHARPER THAN YOU
EXPECT. TO AVOID INJURY, USE AND HANDLE THEM WITH
EXTREME CARE. DO NOT CUT TOWARD ANY PART OF YOUR
FINGERS, HAND OR BODY. DO NOT RUN FINGER ALONG
EDGE. STORE IN A SAFE MANNER.
13. Do not use outdoors.
14. Appliance is not intended to be used or cleaned by children or
persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge of the hazards involved.
15. Do not use honing oils, water or any other lubricant with the
EdgeCraft® Hybrid®
sharpener Model E20.
16. For household use only.
17. This appliance is intended to be used in household and similar
applications such as: - stakitchen areas in shops, oces, and
other working environments; - farm houses; - by clients in hotels,
motels, and other residential type environments; - bed and breakfast
type environments.
SAVE THESE INSTRUCTIONS.
English — 3

Especificaciones del producto

Marca: EdgeCraft
Categoría: Afilador de cuchillos
Modelo: E20

¿Necesitas ayuda?

Si necesitas ayuda con EdgeCraft E20 haz una pregunta a continuación y otros usuarios te responderán




Afilador de cuchillos EdgeCraft Manuales

Afilador de cuchillos Manuales

Últimos Afilador de cuchillos Manuales