Edgestar TBC50-ACC Manual de Usario

Edgestar No categorizado TBC50-ACC

Lee a continuación 📖 el manual en español para Edgestar TBC50-ACC (12 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

Table of Contents

Thank you 2

Accessories 2

Installation 2

Tapping your first mini keg 3

Operation 9

Cleaning 9

Important safeguards 10

Limited warranty 10

Thank you

Thank you for purchasing this EdgeStar mini kegerator. Once you get this unit set up,

it will provide you and your family with years of great service.

This mini kegerator is designed to refrigerate and serve most 5 Liter mini kegs- under

optimal conditions, it can refrigerate to the mid to high 30°s Fahrenheit. It ships with a

tap for Heineken brand DraughtKeg 5 Liter mini kegs. An optional accessory kit is

available that fits most other brands of 5 Liter mini keg. A 5 Liter mini keg has about

169 ounces of beer in it, so it should provide about 10 ½ pints of beer or the

equivalent of about 14 12 oz cans.

If you are reading this owner’s manual, you’ve probably already unpacked the unit.

Note that you should save the packaging in case you need to safely transport this

unit in the future.

Accessories

Included accessories:

• Main unit

• AC power cord

• DC power cord

• “Squeeze bottle” cleaning kit

• Heineken-style mini keg tap

• Dispenser handle

• Emblem for dispenser handle

• Drip tray assembly

Optional accessories:

• Regulator

• 16g CO2 cartridges (3)

• 16g CO2 adapter

• 16g CO2 holder

• Non-pressurized mini keg tap

• CO2 releaser

• Pressurized cleaning kit

• Rubber ring (2)

If you would like to order the optional accessory kit, or if you need any help with this

unit, please feel free to call EdgeStar at 866.319.5473.

Installation

In order to assemble this appliance, carefully unpack all parts.

Place the unit on a flat and level surface. It will work best in a

room temperature environment, away from the sun and other

heat sources, and with 2”-3” of ventilation room all around it.

Install the drip tray by sliding it partially underneath the main unit (align the “tab”

sticking out of the drip tray assembly with the notch in the underside of the main unit).

Install the dispenser handle by screwing it onto the dispenser head.

There is also a circular emblem that magnetically attaches directly to the

top of the dispenser handle. Place this on the dispenser handle.

Now select the appropriate power cord (three prong grounded 115V or

the 12V DC plug [cigarette lighter adapter]). Plug the power cord into the

back of the unit, and then plug the other end into your power source.

Check to make sure the unit is on by looking at the LED in front of the

unit. If the LED is lit, your unit is powered up.

We suggest you clean the lines prior to tapping your first mini keg,

and cleaning them again after every mini keg.

Note that this mini kegerator ships with the connections to tap and

enjoy Heineken brand DraughtKeg 5 Liter mini kegs. This is the most

popular and widely-available 5 Liter mini keg. Heineken brand

DraughtKeg 5 Liter mini kegs are already pressurized and need no

additional CO 2 to tap them. With the optional upgrade kit, you can tap and enjoy all

commercially available 5 Liter mini kegs.

Tapping your first mini keg

Cleaning the lines

Before tapping your first mini keg, and after each mini keg, clean the lines.

1. Fill the “Squeeze bottle” cleaning kit half full of water. Add a small amount of

detergent, baking soda, white vinegar, or beer line cleaner. Mix the mixture

thoroughly.

2. Attach the nozzle of the squeeze bottle to the beer line. Place a cup or bowl

underneath the beer dispenser.

3. Squeeze the bottle while opening the dispenser all the way, forcing the

cleaning mixture through the beer line and into the cup/bowl beneath the

nozzle.

4. Once all the mixture has run through the line, rinse out the squeeze bottle.

5. Refill the squeeze bottle with water and repeat the above process with water

until the lines are clear of cleaning solution.

General instructions

Regardless of the brand of 5 Liter mini keg, here are the basic steps for tapping it:

1. Chill your keg- although this mini kegerator has a cooling plate that will cool

your keg, best results will come from a keg that is already cooled to drinking

temperature- this way, the cooling plate only has to keep your keg cool.

2. Follow the instructions on the mini keg to eliminate excess gas or pressure.

3. Connect the beer line to the correct dispenser head and tap the keg (use the

included head for Heineken brand DraughtKeg 5 Liter mini kegs; use the

optional head for all other brands)

4. Connect the gas lines (if using the optional head for non-pressurized 5 Liter

mini kegs)

Especificaciones del producto

Marca:	Edgestar
Categoría:	No categorizado
Modelo:	TBC50-ACC
Colocación del dispositivo:	Aanrecht
Tipo de operación:	Knoppen
Color del producto:	Silver, White
Ancho:	190 mm
Profundidad:	230 mm
Altura:	20 mm
Amable:	Elektronische keukenweegschaal
Apagado automático:	Ja
Exactitud:	1 g
Capacidad máxima de peso:	5 kg
Forma:	Rechthoek
Indicación de batería baja:	Ja
Unidad de medida:	g, lb, ml, oz
Tipo-de-visualización:	LCD
Función de tara:	Ja
Tamaño de los dígitos:	20 mm