Edgewater EdgeMarc 4562T4W Manual de Usario

Edgewater Enrutador EdgeMarc 4562T4W

Lee a continuación 📖 el manual en español para Edgewater EdgeMarc 4562T4W (7 páginas) en la categoría Enrutador. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
4562 Converged
Networking Router
Quick Start Guide
Version 1.0
Page 1 of 7
200-4562-001
Before You Start
Please read this guide thoroughly as it describes the basic installation of
the device. Additional configuration needed to deploy the device in a
specific environment can be performed with the help of online help.
This guide also provides an example of a typical 4562 deployment that
can be used as a guideline for your installation.
Requirements for Installation
A computer with a web browser such as Microsoft Internet Explorer or
Netscape Navigator or any other browser of your choice
At least one Ethernet cable
Following information supplied by the VoIP Service Provider
o IP address of the WAN interface
o if T1 is being used for WAN connection then:
T1 frame format
Layer 2 protocol such as PPP, Frame Relay/DLCIs, HDLC,
etc.
o IP address of the Softswitch
Page 2 of 7
Instructions
Step 1 Connecting the Cables
1. Connect one end of an Ethernet cable to local LAN port 4 of 4562. This port can be seen
in the area “B” of the above diagram. Connect the other end of the cable to your
computer’s Ethernet port.
2. If T1 is used for the WAN connectivity then perform the following steps, otherwise go to
step 5.
Page 3 of 7

Especificaciones del producto

Marca: Edgewater
Categoría: Enrutador
Modelo: EdgeMarc 4562T4W

¿Necesitas ayuda?

Si necesitas ayuda con Edgewater EdgeMarc 4562T4W haz una pregunta a continuación y otros usuarios te responderán




Enrutador Edgewater Manuales

Enrutador Manuales

Últimos Enrutador Manuales