Edision OS NINO PRO S2X + T2/C Manual de Usario
Edision
Decodificadores digitales
OS NINO PRO S2X + T2/C
Lee a continuación 📖 el manual en español para Edision OS NINO PRO S2X + T2/C (2 páginas) en la categoría Decodificadores digitales. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Congratulations on purchasing an
EDISION OS NINO PRO S2X + T2/C
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Remote control with 2 AAA batteries Documentation Service note
1
2
Receiver EDISION OS NINO PRO S2X + T2/C
Notes: The front is factory tted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1 POWER button: Activates/Deactivates the device
2 CH- / CH+ buttons: for moving in the program lists
3
Infrared sensor for the reception of remote
control commands
4
Display LED, displays current information
5 Card reader
Back Panel
6 Input for connecting to terrestrial or cable signal
from the antenna
7 LNB IN: Connection for the coaxial cable
to the signal from the satellite system
8 WIFI: External Antenna 2.4GHz
9 IR IN: Infrared connection port
10
HD OUT: Connection to an HDTV quality TV
11
ETHERNET: Ethernet port RJ45 10/100 Mbps
12
S/PDIF: Audio interface for amplier/audio console
13
RS 232: For connecting to a PC,
using RS-232 cable, for receiver software update
14
Connection for an adapter (DC 12V/2,0A)
Subpage
15
/ 2 x USB: Connection for USB storage devices
Note: For interference-free satellite TV reception,
a specialist technician must calibrate your satellite
TV system with a digital TV level meter
•
Connect the receiver using via HDMI cable
the HD OUT output port to your TV’s HDMI input port
•
Now connect the receiver to the satellite
antenna cable via the input. ANT IN or LNB IN
•
Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
•
Connect the receiver to the power supply.
•
The receiver starts with the BOOT process
and is operational within a short time
Please contact
your EDISION
specialist dealer
for any further
support
and service.
OS NINO PRO S2X + T2/C
F u l l H D L i n u x C o m b o R e c e i v e r
32mm
110mm
146mm
1
HDMI in
2
HD im
kabel
HDMI
kabel
DC 12V/2,0 A
HD OUT
LNB IN 13/18V
400mA MAX
ETHERNET
ANT IN RS232IR IN
WIFI
S/PDIF
Power socket
HD OUT:
Output receiver
HDMI cable
TV set connection panel
Use an HDMI input!
LNB IN:
Connecting
the cable to the satellite
signal
ANT IN:
coaxial-wire
input from terrestrial /
cable signal
Antenna cable
coaxial-wire Antenna
15
DC 12V/2,0 A
HD OUT
LNB IN 13/18V
400mA MAX
ETHERNETANT IN RS232IR IN
WIFI
S/PDIF
6 7
9
10
11
13
12
14
POWER CH- CH+
OS nino pro
1 2
3
4
5
8
The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support
OS NINO PRO S2X + T2/C
F u l l H D L i n u x C o m b o R e c e i v e r
Visit us on:
www.edision.gr
Remote Control UNIVERSAL 1 PRO
3
Power
Switches between operation and standby
< (PREV)
Return to the previous channel/service or
move to the end of the Service List or the Play List
Help
This provides users with a quick guide of
using Edision OS nino
Menu
Open main menu & select sub menu using
by navigation buttons
EXIT
Close and return to the previous menu and screen
RADIO - TV
Switch to TV mode.
Switch to Radio mode
COLOR BUTTONS
Activates certain menu functions.
Usage instructions are shown in each OSD menu
Audio
Select an audio track and a sound mode
PLAY
Starts timeshift if available
REC
Activates immediately recording-option
NUMERIC KEY (0-9)
Control the numerical operation
and change the Channel/Service
number directly
> (NEXT)
Go to the next channel/service
or move to the beginning of the
Service List or the Play List
TIMER
Start timer function
INFO
Displays the Electronic Program Guide (EPG)
information if provided
EPG
Displays the Electronic Program Guide (EPG)
information if provided
Mute
Mutes or unmutes the audio temporarily
TEXT
Switch between the teletext and TV modes
SUBTITLE
Display the subtitle language list
<
PREV
MANUAL INSTRUCTION FOR LEARN REMOTE CONTROL EDISION UNIVERSAL 1 PRO
Your set-top-box remote control has 5 learning-function keys, in the up right hand side TV keypad panel area. Each one can be used accordingly
as the following example:
1. Turning your TV set ON/OFF [TV POWER]
2. Selecting screen RATIO [Auto, 16:9, 4:3, etc)]
3. Increasing/decreasing volume [VOL+ , VOL-]
4. Command confirmation [BACK or EXIT]
The other 48 keys are for the control of the EDISION set-top-box.
SET UP FOR LEARNING FUNCTION
• Press [TV POWER] key in the up right hand side TV keypad panel area continuously for 5 Sec. until the LED lights up and keep lighting, then release the
key. This means the remote control is in the learning mode.
• Within 10 seconds, press the key in the original TV IR control, which needs to be learned, for example the key, then the red LED is flashing. It [POWER]
means this button is ready to receive the learning signal.
• Aim the emission port of the original TV remote control at the front at the emission port at the front of your set-top box remote control (distance between
these two ports has to be about 2~3 CM).
• Then press the key which is to be learned in your original TV remote control, for example the [POWER] key of your original TV remote control continuously
for 3 seconds. If the red LED flashes quickly for three times and keep lighting, it means the set-top box remote control has succeeded in receiving the
signal and you have completed the learning procedure of ON/OFF key.[TV POWER]
• Then release the key of your original TV remote control.[POWER]
If the copying procedure fails , the red LED will blink and stay OFF. In this case please repeat the procedure.
For the next programmable function, please repeat steps 1 to 3:
• Selecting screen ratio with RATIO [Auto, 16:9, 4:3, etc]
• Increasing/decreasing volume [VOL+ , VOL-]
• Command confirmation [BACK or EXIT]
Now you can operate your TV with the 5 programmed by you keys of your set-top box remote control. During the operation, the LED will flash to indicate that the
signal is transmitted!
EDISION UNIVERSAL 1 PRO REMOTE CONTROL is compatible with all EDISION STB’s*, plus it is pre-programmed with 5 basic functions
for SAMSUNG & LG** tv sets. Alternatively, you can program its 5 programmable buttons to any 5 functions of your TV.
* For EDISION STB compatibility, please visit our webpage
**LG & SAMSUNG are brand names that belong solely to LG Electronics Inc. and Samsung Electronics Co., Ltd
respectively. Any brand name reference in this text is only for informational purposes towards the consumer
that is interested in the product.
VOL
+
RATIO
BACK
VOL
-
TV POWER
Notes: Many of the listed buttons have multiple functions, which, are displayed in the
menus. Some buttons and functions are optional. Important functions and buttons are
briey explained below. The buttons to be used are marked in red in the diagrams.
EDISION HELLAS LTD • FARMAKEIKA - 57001 N. RYSIO • THESSALONIKI - GREECE
Especificaciones del producto
| Marca: | Edision |
| Categoría: | Decodificadores digitales |
| Modelo: | OS NINO PRO S2X + T2/C |
¿Necesitas ayuda?
Si necesitas ayuda con Edision OS NINO PRO S2X + T2/C haz una pregunta a continuación y otros usuarios te responderán
Decodificadores digitales Edision Manuales
13 Septiembre 2024
6 Agosto 2024
Decodificadores digitales Manuales
- Decodificadores digitales JVC
- Decodificadores digitales ADB
- Decodificadores digitales Strong
- Decodificadores digitales Hikvision
- Decodificadores digitales Thomson
- Decodificadores digitales Manta
- Decodificadores digitales Megasat
- Decodificadores digitales Black Box
- Decodificadores digitales Denver
- Decodificadores digitales Hama
- Decodificadores digitales Matrox
- Decodificadores digitales Kathrein
- Decodificadores digitales Dahua Technology
- Decodificadores digitales Goclever
- Decodificadores digitales Konig
- Decodificadores digitales Trevi
- Decodificadores digitales Marmitek
- Decodificadores digitales Humax
- Decodificadores digitales Emtec
- Decodificadores digitales Conceptronic
- Decodificadores digitales Crestron
- Decodificadores digitales Formuler
- Decodificadores digitales Extron
- Decodificadores digitales Blustream
- Decodificadores digitales Triax
- Decodificadores digitales Tams Elektronik
- Decodificadores digitales TELE System
- Decodificadores digitales AMX
- Decodificadores digitales Best Buy
- Decodificadores digitales Atlantis Land
- Decodificadores digitales C2G
- Decodificadores digitales Golden Media
Últimos Decodificadores digitales Manuales
12 Octubre 2024
12 Octubre 2024
8 Octubre 2024
29 Septiembre 2024
23 Septiembre 2024
20 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024