Elba EAC-E2094I(WH) Manual de Usario

Elba Aires acondicionados EAC-E2094I(WH)

Lee a continuación 📖 el manual en español para Elba EAC-E2094I(WH) (14 páginas) en la categoría Aires acondicionados. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/14

SAFETY PRECAUTIONS

Keep this appliances out of reach from children. Do not let them to

operate the appliance without supervision.

To protect against the risk of electrical shock, do not immerse the

product, cord or plug into water or any other liquids.

This product is for household and indoor use only.

This product is not intended for use by person (including children)

with reduced physical, sensory or mental capabilities unless they

have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

If the power cord or plug is damaged, it must be replaced by the

service centre or a qualified person to avoid hazard.

Before installation, check if the mains supply voltage is matched

with the voltage stated on the rating plate on the product.

There is a risk of fire if cleaning is not carried out in accordance with

this instruction.

●

Make sure to have the authorized dealers or our service centre to carry out installation of the appliance.

1. The units are not to be installed at places where

there might be leakage of combustible gases.

Earth leakage-

circuit breaker

Make sure that the earth leakage-circuit breaker

is installed.

After the connecting of the wires between the indoor unit and the

outdoor unit, check whether the connection is loose or not by pulling

the wire with a little force.

The loose connection might result in fire hazard.

Make sure that the air conditioner is properly grounded.

The grounding wire on the air

conditi er should be tightly connectedon

to the ground of the power source.

Improper grounding might cause

electric shocks or other hazards.

S K

Do not ss, stretch, e, heatpre damag

or modify the power line.

It might cause electric shocks, overheating, fire

hazards, etc. If the power line wire is damaged or

needs to be replaced due to some other reasons,

please make re to have the aut ized servicesu hor

technician to do the replacement.

Never try to stop the operation of

the air conditioner by pulling out the

power supply line.

Such action might cause electric shocks

or fire hazards.

Do not connect the power supply line to an

int iate c ector. Use of ed werermed onn prolong po

line is strictly f en. Do no share the sameorbidd t

plug connector with other electric appliances.

It might cause electric shocks, overheating,

fire hazards or other accidents.

Do not rate the switch by wetope

hands.

It might cause electric shocks.

Before the connector is plugged

in, please make sure that there is

no dust on it and that it is plugged

fully in place

If there is dust on

the plug or if the

plug is not in place,

it might cause

electric shocks or

fire hazards.

copper

wire

Never use the fuse with incorrect

capacity or any other metal wires.

The use of metal or er es for fuse ghtcopp wir mi

cause operational failures or fire hazards.

In case that the leaked gas accumulates around the units, there

might occur the accident of fire hazards.

Absence of the earth leakage-circuit breaker might lead to electric

shock and some other hazards.

Wrong!

Instructions for Installation

Instructions for Operation

Especificaciones del producto

Marca:	Elba
Categoría:	Aires acondicionados
Modelo:	EAC-E2094I(WH)
Color del producto:	Zwart
Manual de usuario:	Ja
Colocación:	Binnen
Cables suministrados:	Coaxiaal
Cantidad por paquete:	1 stuk(s)
Impedancia:	75 Ohm
Sistema de suspensión para la pared.:	Ja
Bandas de frecuencia soportadas:	UHF
Kit de montaje en pared:	Ja
Longitud del cable de antena:	2 m
Ganar:	3 dB
Rango de recepción (UHF):	470 - 810 MHz