Elgento E22001 Manual de Usario

Elgento Hierro E22001

Lee a continuación 📖 el manual en español para Elgento E22001 (6 páginas) en la categoría Hierro. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Afx
stamp
Here
TO:
CUSTOMER SERVICES DEPARTMENT.
ELGENTO.
SUTTON HOUSE,
BERRYHILL ROAD,
FENTON,
STOKE ON TRENT,
STAFFORDSHIRE,
ST4 2NL.
Steam Iron
INSTRUCTION MANUAL E22001
2600W
PARTS IDENTIFICATION
This product is guaranteed for 12 months from the date of the original purchase.
If any defect arises due to faulty materials or workmanship the faulty products must
be returned to the place of purchase. Refunds or replacement is at the discretion of
the store.
The following conditions apply:
The product must be returned to the retailer with the original proof of purchase.
The product must be installed and used in accordance with the instructions contained
in this instruction guide.
It must be used only for domestic purposes.
It does not cover wear and tear, damage, misuse or consumable parts.
PFD has no responsibility for incidental or consequential loss or damage.
Valid in the UK and Eire only.
Technical Specication.
Guarantee.
Steam Iron
Model No E22001
AC: 220V-240V ~50Hz
Power 2600W
Sutton House,
Berryhill Road,
Fenton
Stoke on Trent
Staffordshire,
ST4 2NL.
Before using for the rst time
Dispose of all packaging and plastic bags and in a responsible manner
Some parts of the iron have been slightly greased and as a result, the iron may
smoke slightly when switched on for the rst time.
It will not happen again after the rst use.
Before using for the rst time remove any protective lms or stickers from the
sole plate and the cabinet. Clean the sole place with a soft cloth.
When using the iron for the rst time, test it on an old piece of fabric to ensure
that the sole plate and water tank are completely clean.
Technical Support
If you require technical support or in the unlikely event that your purchase is faulty
please telephone our Helpline for immediate assistance.
0871 221 3619
IMPORTANT SAFETY INFORMATION
ALWAYS FOLLOW THE SAFETY INSTRUCTIONS
Use the iron only for its intended use.
Retain the manual and the safety information in a safe place.
To protect against the risk of electric shock, do not immerse the iron in water
or any other liquids.
The iron should always be turned to the minimum heat setting before plugging
or unplugging from the mains socket.
Never pull the cord to disconnect from the mains: switch off at the wall socket
then grasp plug and pull out to disconnect.
Do not allow the cord to touch hot surfaces.
Allow the iron to cool completely before putting away.
Always switch off at the wall socket and disconnect the iron from the electrical
outlet when lling with water or emptying and when not in use
Do not operate the iron with a damaged cord or if the iron has been dropped
or damaged.
To avoid the risk of electric shock, do not disassemble as there are no user
serviceable components in the iron please take it to a qualied electrician
for examination and/or repair
Close supervision is necessary for any appliance being used by or near children.
Do not leave the iron unattended when connected to the mains or on an ironing
board.
Burns can occur from torching hot metal parts, hot water or steam, use caution
when you turn a steam iron upside down-there may be hot water in the reservoir.
If the iron is not operating normally, disconnect from the power supply and have it
inspected by a qualied electrician.
Your iron is designed to rest on the heel.
Do not leave the iron unattended when switched on.
Do not place the iron on an unprotected surface even if it is on its heel rest.
This appliance is not intended for use by children or the inrm without adequate
supervision or training by a person responsible for their safety.
Children should be supervised at all time to ensure that they do not play
with the appliance.
Keep electrical appliances out of reach from Children
The lling aperture must not be opened during use.
The iron must be used and rested on a stable surface.
SAVE THE INSTRUCTION MANUAL FOR FUTURE REFERENCE
ELECTRICAL SAFETY
The wires in the mains lead are coloured
in accordance with the following code:
GREEN/YELLOW: EARTH (E)
BLUE: NEUTRAL (N)
BROWN: LIVE (L)
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN & YELLOW must be connected to the terminal
in the plug which is marked with the letter “E” by the earth symbol or coloured
GREEN, GREEN/YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is
marked with the letter “N” or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is
marked with the letter “L” or coloured RED
Always ensure that the Mains Cord is xed into the plug through the Cord Guard
or Cable Clamp, (plug wiring diagram above), and that the Cord Guard screws are
tightened to clamp the Cord (outer sheath and inner coloured wires) into position in
the plug. Make sure that plug top is also tted securely.
This appliance must be protected by a 13 Amp fuse in a 13 Amp type (BS1363) plug.
Should you need to replace the fuse, use only a 13Amp ASTA approved BS1362 fuse
(13A).
Elgento.
Product Helpline. 0871 221 3619
For all your product needs.

Especificaciones del producto

Marca: Elgento
Categoría: Hierro
Modelo: E22001

¿Necesitas ayuda?

Si necesitas ayuda con Elgento E22001 haz una pregunta a continuación y otros usuarios te responderán




Hierro Elgento Manuales

Hierro Manuales

Últimos Hierro Manuales