Elite Screens ezCinema F135NWH Manual de Usario

Elite Screens pantalla de proyección ezCinema F135NWH

Lee a continuación 📖 el manual en español para Elite Screens ezCinema F135NWH (7 páginas) en la categoría pantalla de proyección. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

Rev121517BR www.elitescreens.com 1

ezCinema Series

Portable Floor Pull Up Screen-

USER’S GUIDE

Precautions:

Warning! Screen damage can result from product mishandling if the following

precautions are not followed.

In accordance with practicing home fire safety and to avoid screen damage, do not place the

screen near or beside a fireplace or high temperature appliances such as a gas stove, BBQ or

heater. (Fig. 1)

Fig.1 Fig.2

Place the screen beyond the reach of children. (Fig.2)

Rev121517BR www.elitescreens.com 2

PARTS IDENTIFICATION:

For models 100”, 120”, 135” and 150”

Refer to the table below for information regarding quantity of the base feet and cup

Diagonal Size

QTY (Base foot)

QTY (Short Foot Cup)

QTY (Long Foot Cup)

100" 1 pcs 2 pcs 2 pcs

120" 1 pcs 2 pcs 2 pcs

135" 3 pcs 6 pcs 0 pcs

150" 2 pcs 4 pcs 0 pcs

Attention:

- Please install the two telescoping support rods simultaneously when pulling up and retracting

the screen material.

- Do not use the screen in a very strong windy environment

- not use on uneven surfaces Do

New Functions and features of F100 and above models:

1. foot allows screen to be adjusted up to 1 inch to level the screen to the ground Base

2. 40” bottom black border of F120 and above models for better viewing for people in the back

Lock

Back

Note: Second telescoping

rod available on 150”

models only.

Box Cover

Big support rod

Locking sleeve

Small support rod

Bracket Hook

Upper scroll bar

Pull hook

Adjustable

up to 1"

Base foot

(available on

models 100" above only)

Adjustment screw for leveling

Front

Black Masking

Border Edge

Long Foot Cup

Box

Bottom Black Masking

White projection surface

S hort Foot Cup

Rev121517BR www.elitescreens.com 3

Setting up the screen

Installation:

The ezCinema screen is designed to be used as an easy to operate portable screen for a variety of

presentation environments. Its design enables it to be versatile for use in either classroom,

conference room, home or patio presentations. When packed, the unit carries with ease and opens up

for projection presentations within seconds. As a general rule, portable projector screens should be

installed in an area free from wind and heat or open flame sources such as a heater, BBQ grill or

fireworks display.

Extend the base feet:

For sizes below 100”

Locate the base feet on the bottom of the box cover at each end and rotate the base foot until it forms

a right angle between the footboard and the cover box.

For sizes 100” – 150”

All models including 100” utilize the short and long feet cups. Locate each screw hole on the bottom

of the case of the screen and screw in a short foot cup on the base feet and the long foot cup on the

ends. Short cups included only in the 135” and 150” models.

Open the box cover:

Unlatch the buckles on both ends of the box and open the box cover. Next, secure the box with one

hand while removing the telescopic support rod with your other hand.

Long foot cup

Short cup

Especificaciones del producto

Marca:	Elite Screens
Categoría:	pantalla de proyección
Modelo:	ezCinema F135NWH
Peso.:	819 g
Ancho:	244 mm
Profundidad:	211 mm
Altura:	60 mm
Tipo de conector USB:	USB Type-A
red LAN:	Ja
Resolución Máxima:	3840 x 2160 Pixels
Cables suministrados:	SATA
Número de puertos USB 2.0:	2
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	1
Salidas de auriculares:	3
Soporta Windows:	Windows 10 x64
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Zócalo del procesador:	LGA 1200 (Socket H5)
Fabricante del procesador:	Intel
Memoria interna máxima:	64 GB
Canales de salida de audio:	7.1 kanalen
Tipo de interfaz Ethernet:	Gigabit Ethernet
placa base con chipset:	Intel B560
Tipo de ranura de memoria:	DIMM
chip de audio:	Realtek ALC887 / Realtek ALC897
Controladores suministrados:	Ja
Canal de memoria:	Dubbelkanaals
Ranuras PCI Express x1 (Gen 3.x):	2
Interfaces de unidad de almacenamiento compatibles:	M.2, SATA III
Puerto(s) PS/2:	1
Componente para:	PC
Controlador LAN:	Intel® I219-V
Número de conectores SATA III:	6
No ECC:	Ja
Activación de la LAN:	Ja
Procesadores compatibles:	Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium G
Número de unidades de almacenamiento admitidas:	8
Tipos de memoria soportados:	DDR4-SDRAM
Wifi.:	Nee
Código del Sistema Armonizado (SA):	84733020
Tipos de unidades de almacenamiento compatibles:	HDD & SSD
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	micro ATX
Número de ranuras de memoria:	2
Velocidades de reloj de memoria admitidas:	2133,2400,2666,2800,2933,3200,3333,3466,3600,3733,4000,4266,4400,4600,4800,5000 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	128 Mbit
Soporte para procesamiento paralelo:	Niet ondersteund
Conexiones COM:	1
Conexión para refrigerador de CPU:	Ja
Conexiones para ventiladores de caja:	1
Conector de alimentación ATX (24 pines):	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Memoria sin búfer:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	1
Conector TPM:	Ja
Salida-S/PDIF:	Ja
Conector de alimentación EPS (8 pines):	Ja
Conectores de alimentación de periféricos (Molex) (4 pines):	2
Borrar puente CMOS:	Ja
Zócalos de procesador compatibles:	LGA 1200 (Socket H5)
Número de ranuras M.2 (M):	2
conector de alimentación de 12V:	Ja
Carril de conexión LED RGB:	Ja
Ranuras PCI Express x16 (Gen 4.x):	1