Elite Screens ezFrame R106H Manual de Usario

Lee a continuación 📖 el manual en español para Elite Screens ezFrame R106H (3 páginas) en la categoría pantalla de proyección. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
Insta- 2 Screen Series RP
Self Adhesive Rear Projecon Screen Film-
Installation Guide
PRECAUTIONS
1. This product is an adhesive rear-projecon screen that can be applied to various surfaces such
as transparent glass or acrylic.
2. This product is made for a one-me applicaon. It has a non-reusable adhesive that bonds
rmly to a window surface. If the window has any layer treatment such as nng, it is likely
that the layering will be damaged upon removal of the screen.
3. To ensure an even andbubble free” installaon, make sure that the window surface is clean -
and evenly moistened previous to installaon.
4. Do not fold the Insta-RP2 Screen’s material. Folding will result in a permanent crease that
cannot be removed.
5. Avoid touching the screen with any hard or sharp objects that may cut, scratch or otherwise
deface the material.
6. The Insta- 2 Screen is applied to a moist surface. This can impact the installaon of the RP
material by possibly creang slight ripples or bubbling. These will disappear within the rst few
weeks as the micro-droplets of water trapped in the adhesive evaporate.
Contents of this package Pad
Please make sure that all parts listed below are included. Contact Elite Screens Immediately if anything is
missing.
a . b .
Parts List
QTY
a. 2 Insta-RP Screen Material
1
b. Microfiber cleaning cloth
1
Installation
1. Use a spray bole lled with water and a mild detergent (1:1000 rao column)
2. Thoroughly clean the glass surface using the correct glass cleaning equipment-
3. Make sure that the glass surface is smooth (unblemished) and perfectly at.
4. Cut the screen to t the required size of the product
5. Parally separate the lm from the screen’s adhesive backing.
(*Tip, it is easier to apply the screen while separang the lm from the adhesive at the same
me. This keeps the material from scking together or going on unevenly)
6. Spray applicators are ideal to evenly spread the moisture before aaching the screen material
to the glass.
7. Carefully smooth out the surface (preferably using latex gloves) to ensure that the screen is
level with no bubbles or ripples present.
8. Now that the material is perfectly at, make sure that it is properly aligned .
9. Use of a leveling brush or scraper will eliminate the residual moisture and make sure that the
material has been applied properly.
10. Allow material to stand unused for 2 to 3 hours to allow the adhesive to bond and set.
For a local Elite Screens contact or Technical Support, please visit
www.elitescreens.com

Especificaciones del producto

Marca: Elite Screens
Categoría: pantalla de proyección
Modelo: ezFrame R106H

¿Necesitas ayuda?

Si necesitas ayuda con Elite Screens ezFrame R106H haz una pregunta a continuación y otros usuarios te responderán




pantalla de proyección Elite Screens Manuales

pantalla de proyección Manuales

Últimos pantalla de proyección Manuales