Elite Screens ZSP-TR01 Manual de Usario

Elite Screens controlador ZSP-TR01

Lee a continuación 📖 el manual en español para Elite Screens ZSP-TR01 (3 páginas) en la categoría controlador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Rev. 042710- JA

www.elitescreens.com info@elitescreens.com

Wireless RF Projector Trigger Controller

Part# ZSP-TR01

User Guide

Rev. 042710- JA

www.elitescreens.com info@elitescreens.com

SPECIFICATIONS

1. Size and Weight: W x H x D: 4.8”x2”x0.7”, Weight: 0.09LBS

2. : 80 feet (25M) Max. Control Distance

Control Type: ASK / FSK

3. 15V Projector Output Support Trigger Voltage: 3－

4. 315Mhz, Power Below 2 milli-watts RF Spec. Frequency: ：

5. : Directions for user

a. Connect the wireless RF trigger controller and the projector as shown below.

b. Use the wireless RF trigger controller to synchronize the screen drop/rise with the

projection s power cycle via remote control according to the version number on ’

your screen. Version number can be located either on the screen’s end cap

sticker or on the outside sticker of the packaging box.

Location of version number

on end cap sticker.

Fig. 1

Location of version number

on packaging box sticker.

Fig. 2

Rev. 042710- JA

www.elitescreens.com info@elitescreens.com

Note: Directions for synchronizing your 5-12V wireless trigger according to the

version number.

Version 1.4 (5-12V wireless trigger and Elite electric screen must be the same version)

Step 1: Push the small button located on the circuit board on the left side of the projection screen

(please note: you may require a small sharp object to achieve this After the light turns on, ). LED

press & hold the button on your Wireless RF Trigger Controller and make sure the LED light on UP

circuit board turns on.

Step 2: Continue to hold the button for an additional 3-4 seconds. After 3-4seconds, your 5- V up 12

Wireless Trigg should er be activated and you’ll be able to control your screen with your projector s ’

power cycle .

Repeat the steps again if not successful.

(Please be aware, the projector on/oﬀ cycle may take longer to fully activate. It usually takes around

20-30 seconds for full oﬀ and on cycle each time)

Version 2.0 (5-12V wireless trigger and Elite electric screen must be the same version)

Step 1: Make sure to unplug your screen from the power outlet

Step 2: Hold the UP button on your 5-12V wireless trigger

Step 3: While holding the button, plug the screen back to the power outlet UP

Step 4: Wait 5 seconds and then release the button UP

Step 5: Your 5-12V wireless trigger should now be activated with your screen and ready to be used

and able to control your screen with your projector s power cycle. ’

Repeat the steps again if not successful.

Note: Once your RF remote has been activated, th synchronization will be saved even the power e if

is cut off.

Fig. 3

Especificaciones del producto

Marca:	Elite Screens
Categoría:	controlador
Modelo:	ZSP-TR01
Color del producto:	Zwart
Ancho:	300 mm
Profundidad:	30 mm
Altura:	211 mm
Bluetooth:	Nee
Mostrar.:	LCD
Diagonal de la pantalla:	10.2 "
Resolución:	800 x 480 Pixels
Pantalla táctil:	Nee
Formato de audio soportado:	MP3, WMA
Formatos de vídeo soportados:	AVI, DAT, MPEG, MPEG1, MPEG2, MPEG4
Tipo de enchufe de conexión:	Nee
red LAN:	Nee
Tipo de fuente de energía:	AC
Salida de corriente (voltios):	+5V
Salida de corriente (amperios):	2 A
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	Memory Stick (MS), MMC, SD, SDHC
Relación de contraste típica:	300:1
Brillo:	200 cd/m²
Agenda:	Ja
Número de puertos USB 2.0:	1
Altavoces incorporados:	Ja
Interfaz:	USB 2.0
Memoria interna:	16 MB
3D:	Nee
Formato de imagen soportado:	BMP, JPG
relación de aspecto:	16:10
Conecta y reproduce:	Ja
Visualización en pantalla (OSD):	Ja
Temperatura de almacenamiento:	0 - 60 °C
Modos de reproducción:	Rotation, Slideshow
Despertador:	Ja
Función de reloj:	Ja
Reproduce el video:	Ja
Dimensiones (Ancho x Fondo x Alto):	300 x 30 x 211 mm
Mando a distancia incluido:	Ja
Wifi.:	Nee
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Temperatura de funcionamiento (TT):	0 - 50 °C