Elkay Lustertone S4819R3 Manual de Usario

Elkay Hundir Lustertone S4819R3

Lee a continuación 📖 el manual en español para Elkay Lustertone S4819R3 (3 páginas) en la categoría Hundir. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Elkay® Stainless Steel Sink Care and Cleaning Instructions

Your Elkay® stainless steel sink is designed to give you a lifetime of service. For your

convenience, we’ve outlined our recommended care and cleaning instructions.

Prior to cleaning your stainless steel sink, conrm your sink model and nish. If you

need help nding this information, please:

• Visit the Elkay Help Center: https://helpcenter.elkay.com/hc/en-

us/sections/360000408813-Care- -Cleaningand

• Contact Elkay Customer Care: email call 800-476-4106 custcare@elkay.com or

• Scan the QR code below

Daily cleaning of your stainless steel sink is recommended to avoid build-up of soap or

mineral deposits, which may adversely impact Use an the product’s appearance.

ordinary mild detergent to wash the sink, rinse, and then dry with a soft cloth .

• DO clean your Elkay stainless steel sink prior to rst use.

• DO wash and dry your sink after each use.

• DO use a bottom grid or rinsing basket to protect your sink .

• DO run cold water in the sink when pouring boiling water inside it .

DO NOT

• DO NOT use soap pads, steel wool or wire brushes on or within your sink the ;

particles can adhere to the sink surface and will eventually rust. If an abrasive

pad must be used, recommend you use blue Scotch-Britewe ® -Scratch pads. No

Others will scratch and dull the surface.

• DO NOT use dish mats, as these can trap soap and dirt, hindering cleanliness

and harboring harmful bacteria.

• DO NOT use cleaners containing ammonia, chlorides (bleac or other harsh h)

chemicals. If exposed to bleach, your stainless steel sink should be rinsed

immediately to prevent corrosion.

• DO NOT store open containers of household cleaners and chemicals containing

chlorides beneath the sink: bleach, acid, drain cleaner and toilet bowl cleanser.

Vapor emission may cause corrosion and pitting to the exposed stainless steel

and other metals, such as water supply lines.

• DO NOT leave standing water or liquids, such as coee or tea, in your sink;

doing so may result in unwanted stains.

General Cleaning

Light scratches are normal for stainless steel sinks; over time, these light scratches will

blend into the uniform nish pattern.

Maintenance and repair guidelines for Elkay stainless steel sinks are dependent upon

nish type. Finish-specic recommendations are outlined below. For each nish, begin

with Step 1; if unsuccessful, move to the next recommended step.

❖ Lustert Classic and Lustertone Iconix Ground Finishes one® ®

Recommended cleaning kit: LK34

For stains or light scratches, we suggest use of a mildly aggressive cleaner, such as

Shiny Sinks Plus or Flitz . For stubborn stains and more noticeable scratches, we ® ®

recommend use of a more aggressive cleaner, such as Bar Keepers Friend Ensure ®.

the cleaner is rubbed in the direction of the sink grain lines and the sink completely

dried when nished.

Step 1. Powder with sponge

Step 2. Paste with sponge

Step 3. Green Scotch-Brite Pad with powder or paste working with grain

Step 4. Black sanding screen with powder or paste working with grain

❖ Crosstown , Dayton and Celebrity Satin Finishes® ® ®

Recommended cleaning kit: LK34*

*Note: DO NOT use strong abrasive cleaner in the kit, use powder cleaner ONLY.

For stains or light scratches, we suggest use of a mildly aggressive cleaner, such as

Shiny Sinks Plus or Flitz. For stubborn stains and more noticeable scratches, we

recommend use of a more aggressive cleaner, such as Bar Keepers Friend. Ensure the

cleaner is rubbed in the direction of the sink grain lin and the sink completely dried es

when nished.

Step 1. Powder with sponge

Step 2. Paste with sponge

Step 3. Blue Scotch-Brite Pad with powder or paste working with grain

❖ Asana Polished High Glass Mirror Finish®

Recommended cleaning kit: LKCLKIT

Stainless Steel Sink Maintenance and Repair

We suggest the use of mild liquid dishwashing detergent to clean the sink; rinse

thoroughly and dry with a soft cloth. DO NOT use an abrasive cleanser or cloth, as it will

permanently scratch the nish.

Step 1. Mild liquid dishwashing detergent with sponge

Step 2. Dry with soft cloth

The outlined steps above are dependent upon water quality. Failure to follow the recommended care and

cleaning instructions will void product warranty.

❖ Home Remedies

For major grime and/or stains, we recommend th below home remedies. Prior to use, e

test your preferred solution on an unseen area to determine potential eects on nish.

- Vinegar/water solution: Mix ½ cup white vinegar with ½ cup water. Dip a soft

cloth into the solution and then rub in the direction of the grain lines. Once

nished, rinse the solution and dry with soft cloth to prevent damage to sink

nish.

- Baking soda/toothbrush mixture: Appy a small amount of baking soda and water

to a toothbrush, then rub gently in the direction of the grain lines. Once nished,

rinse thoroughly and dry with soft cloth to prevent damage to sink nish.

DO NOT allow any part of your stainless steel sink to soak in either home remedy.

For additional information, please visit elkay.com or contact Elkay Customer Care:

call (800) 476-4106 or email . custcare@elkay.com

Especificaciones del producto

Marca:	Elkay
Categoría:	Hundir
Modelo:	Lustertone S4819R3
Color del producto:	Zwart, zilver
Peso.:	386 g
Ancho:	90 mm
Profundidad:	79 mm
Altura:	136 mm
Ancho del embalaje:	104 mm
Empaquetadura en profundidad:	149 mm
Altura del embalaje:	210 mm
Amable:	Koeler
Nivel de ruido (baja velocidad):	17 dB
Nivel de ruido (alta velocidad:	30 dB
País de origen:	China
Material:	Aluminium
Flujo de aire mínimo:	15.7 cfm
Flujo de aire máximo:	43.1 cfm
Abarcando:	12 V
Velocidad de rotación (máx.):	2200 RPM
Velocidad de rotación (mín.):	800 RPM
Ubicación adecuada:	Processor
Procesadores compatibles:	AMD A, AMD FX, Intel Celeron, Intel Core 2 Duo, Intel Core 2 Extreme, Intel Core 2 Quad, Intel Pentium, AMD Phenom II X2, AMD Phenom II X3, AMD Phenom II X4, AMD Phenom X3, AMD Phenom X4
Consumo de energía (típico):	1.8 W
Código del Sistema Armonizado (SA):	84733080
Diámetro del ventilador:	92 mm
Tensión nominal de red:	0.15 A
Zócalos de procesador compatibles:	Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+
Presión de aire máxima:	2.63 mmH2O
Número de tubos de calor:	3
Ventilador de alimentos (ancho x fondo x alto):	92 x 92 x 25 mm
Diámetro de los tubos de calor:	6 mm
Dimensiones del disipador de calor (An x Pr x Al):	90 x 51 x 136 mm
Peso del disipador de calor:	306 g
Peso de:	73 g
Presión de aire mínima:	0.35 mmH2O
Vida-útil-del-producto:	40000 uur