Elmo TNC4604X Manual de Usario

Elmo Cámara de vigilancia TNC4604X

Lee a continuación 📖 el manual en español para Elmo TNC4604X (8 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
T N C 4 6 0 4 X
I N S T R U C T I O N M A N U A L
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION
•Do not use any power supply other than
specified.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
* The CAUTION label is attached on the
bottom of camera.
INFORMATION
This equipment has been tested and found
to comply with the limits for Class A digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, use, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his
own expense.
USER-INSTALLER CAUTION: Your
authority to operate this FCC verified
equipment could be voided if you make
changes or modifications not expressly
approved by the party responsible for
compliance to Part of the FCC Rules.
- 1 -
IMPORTANT SAFEGUARDS
1. Read Instructions
All the Safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions
The safety instructions and instruction manual
should be retained for future reference.
3. Heed Warnings
All warnings on the appliance and in the instruction
manual should be adhered to.
4. Follow Instructions
All operating and use instructions should be
followed.
5. Cleaning
Disconnect this video product from the power
supply before cleaning.
6. Attachments
Do not use attachments not recommended by the
video product manufacturer as they may cause
hazards.
7. Water and Moisture
Do not use this video product near water - for
example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a
swimming pool and the like.
8. Accessories
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table. The video product
may fall, causing serious injury to a child or adult,
and serious damage to the appliance. Use only with
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the video product. Any
mounting of the appliance should follow the
manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.
9. Ventilation
This video product should never be placed near or
over a radiator or heat register. This video product
should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.
10. Power Sources
This video product should be operated only from the
type of power source indicated on the marking label.
If you are not sure of the type of power supply to
your location, consult your appliance dealer or local
power company.
11. Power-Cord Protection
Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, screws, and the point
where they exit from the appliance.
12. Lightning
For added protection for this video product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the power supply and
cable system. This will prevent damage to the video
product due to lightning and power-line surges.
13. Overloading
Do not overload power supply and extension cords,
as this can result in a risk of fire or electric shock.
14. Object and Liquid Entry
Never push objects of any kind into this video
product through openings as they may touch
dangerous voltage points or short-out parts that
could result in a fire or electrical shock. Never spill
liquid of kind on the video product.
15. Servicing
Do not attempt to service this video product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
16. Damage Requiring Service
Disconnect this video product from the power
supply and refer servicing to qualified service
personnel under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the video product.
c. If the video product has been exposed to rain or
water.
d. If the video product does not operate normally by
following the operating instructions in the
instruction manual. Adjust only those controls that
are covered by the instruction manual as an improper
adjustment of other controls may result in damage
and will often require extensive work by a qualified
technician to restore the video product to its normal
operation.
e. If the video product has been dropped or the
cabinet has been damaged.
f. When the video product exhibits a distinct change
in performance - this indicates a need for service.
17. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or
other hazards.
18. Safety Check
Upon completion of any service or repairs to this
video product ask the service technician to perform
safety checks to determine that the video product is
in proper operating condition.
- 2 -
PART NAMES AND FUNCTIONS
Lens mount
Mount a CS-mount lens.
Camera mount
For mounting a camera on bracket, housing,
etc. (1/4"-20UNC thread)
Focusing dial
Refer to "HOW TO USE" on page 3 for
adjustment of the lens back-focus.
IRIS terminal
Connect when an automatic iris lens is used.
VIDEO OUT terminal
Connect to a monitor TV, etc. (BNC connector)
AC power terminal
Connect this to the AC24V 60Hz or DC12V
power supply.
6
5
4
3
2
1
Ground terminal
Connect this to the ground wire of the
power supply cord.
Camera control switches
Refer to "CAMERA CONTROLS" on
page 4.
8
7
+
1
-
2
+
-
DC12V
AC24V
All dimensions in mm (inch)
HOW TO CONNECT
Before connection, make sure that power of all units to be connected are OFF and cords are unplugged.
1. Mount a lens onto the camera. Refer to "HOW TO USE" on page 3 for usable lens.
2. Connect video terminal of the camera and the video input terminal of a monitor TV, etc. with a
75Ωcoaxial cable.
3. Connect the power terminal of the camera to a power supply.
Caution: Installation should be made by a qualified service personnel and should conform to
all local codes.
Lens, coaxial cable for video signal and power supply are not supplied with a camera.

Especificaciones del producto

Marca: Elmo
Categoría: Cámara de vigilancia
Modelo: TNC4604X

¿Necesitas ayuda?

Si necesitas ayuda con Elmo TNC4604X haz una pregunta a continuación y otros usuarios te responderán


Cámara de vigilancia Elmo Manuales

Elmo

Elmo TNC4604X Manual de Usario

20 Agosto 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024
Vivotek

Vivotek AI-108 Manual de Usario

27 Octubre 2024
Acti

Acti E88 Manual de Usario

27 Octubre 2024
Yale

Yale WIPC-303W Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024
Airlive

Airlive DM-720 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3615W Manual de Usario

27 Octubre 2024
Vivotek

Vivotek IP8133 Manual de Usario

27 Octubre 2024
Olympia

Olympia OC 1280P Manual de Usario

27 Octubre 2024