Elmo TSE270X Manual de Usario

Elmo No categorizado TSE270X

Lee a continuación 📖 el manual en español para Elmo TSE270X (8 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
T S E 2 7 0 X · T S E 2 7 1 X · T S E 2 7 2 X
I N S T R U C T I O N M A N U A L
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
WARNING
TO RE D UCE THE RIS K OF FI RE OR
ELE CTRIC SH OCK, DO NOT EX P OS E THIS
APPLIAN CE T O RA IN OR MOISTURE.
CAUTION
Do not use any power supply other than specified.
The CAUTION label, shown on the left, is attached
on the top of camera.
INFORMATION
This equipment has been tested and found to comply
with the limits for Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are
desinged to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be required
to correct the interference at his own expense.
USER-INSTALLER CAUTION: Your authority to operate
this FCC verified equipment could be voided if
you make changes or modifications not expressly
approved by the party responsible for compliance
to Part of the FCC Rules.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFEGUARDS
- 1 -
1. Read Instructions
All the Safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions
The safety instructions and instruction manual should
be retained for future reference.
3. Heed Warnings
All warnings on the appliance and in the instruction
manual should be adhered to.
4. Follow Instructions
All operating and use instructions should be
followed.
5. Cleaning
Disconnect this video product from the power supply
before cleaning.
6. Attachments
Do not use attachments not recommended by the
video product manufacturer as they may cause
hazards.
7. Water and Moisture
Do not use this video product near water - for
example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming
pool and the like.
8. Accessories
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table. The video product
may fall, causing serious injury to a child or adult,
and serious damage to the appliance. Use only with
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the video product. Any
mounting of the appliance should follow the
manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.
9. Ventilation
This video product should never be placed near or
over a radiator or heat register. This video product
should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.
10. Power Sources
This video product should be operated only from the
type of power source indicated on the marking label.
If you are not sure of the type of power supply to
your location, consult your appliance dealer or local
power company.
11. Power-Cord Protection
Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to
cords at plugs, screws, and the point where they exit
from the appliance.
12. Lightning
For added protection for this video product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the power supply and
cable system. This will prevent damage to the video
product due to lightning and power-line surges.
13. Overloading
Do not overload power supply and extension cords,
as this can result in a risk of fire or electric shock.
14. Object and Liquid Entry
Never push objects of any kind into this video
product through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electrical shock. Never spill liquid
of kind on the video product.
15. Servicing
Do not attempt to service this video product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
16. Damage Requiring Service
Disconnect this video product from the power supply
and refer servicing to qualified service personnel
under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the video product.
c. If the video product has been exposed to rain or
water.
d. If the video product does not operate normally by
following the operating instructions in the instruction
manual. Adjust only those controls that are covered
by the instruction manual as an improper adjustment
of other controls may result in damage and will often
require extensive work by a qualified technician to
restore the video product to its normal operation.
e. If the video product has been dropped or the
cabinet has been damaged.
f. When the video product exhibits a distinct change
in performance - this indicates a need for service.
17. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or
other hazards.
18. Safety Check
Upon completion of any service or repairs to this
video product ask the service technician to perform
safety checks to determine that the video product is
in proper operating condition.
- 2 -
PRECAUTIONS FOR USE AND INSTALLATION
* Never aim the camera at the sun.
Never aim or point the camera at the sun even if you are
not shooting.
* Do not shoot intense light.
Strong light such as a spot light on the image plane will
cause blooming or smear. When strong light comes into
the image plane, vertical stripes may appear on it.
However, this does not mean that the camera is defect.
* Take precautions when handling a camera.
Do not drop your camera, or give it a strong shook or
vibration. This may cause camera to malfunction.
* Do not touch internal parts.
Be sure not to touch the internal parts. This may cause to
electrical shock.
* Do not let the camera get wet.
Install the camera at the place where it will not get wet.
Should it gets wet, turn off the power immediately and
contact your dealer.
* Install your camera where no video noise appears.
When camera cables have been laid near electric wires or
television receivers, a noise may interfere the image.
If noise occurs, relocate cables or reinstall equipment.
* Check the ambient temperature and humidity.
Avoid using camera in areas where temperature is
consistently hotter or colder than the specified range (See
Specifications chart below) or poor image quality or
damaged parts may occur.
Precautions should also be taken to avoid areas of high
humidity.
* Should you notice any trouble.
If any trouble occurs while you are using the camera, turn
off the camera and contact your dealer. Failure to do so may
cause damage to the camera.
* The socket-outlet should be installed near the equipment
and should be easily accessible.
SPECIFICATION
Power source
Power consumption
Pick-up device
Effective picture element
Scanning area
Scanning system
Scanning frequency(H)(V)
Sync. system
Resolution
S/N ratio
Recommended illumination
AGC
Sens-up
Backlight control
AES
(Automatic Electronic Shutter)
Gamma correction
Accumulation node
Output signal
Auto-iris terminal
Power terminal
Lens mount
Ambient temperature
Ambient humidity
Dimensions
Weight
AC24V 10% 60Hz 1Hz± ±
Approx.6W
1/3" Black & White interline-transfer CCD
512 (H) X 492 (V)
4.92mm (H) X 3.69mm (V)
2:1 interlaced
15.75Hz 60Hz
Line-lock
380TV lines (Horizontal) 350TV lines (Vertical)
More than 46dB
22 lx (F1.2 under incandescent lamp)
Built into camera circuitry
Provided (Factory-set at OFF)
Provided (Factory-set at OFF)
Provided (Factory-set at OFF)
0.45
Field
VBS 1.0 Vp-p, 75 , EIA, compatibleΩ
4P (DC/Video)
3P terminal
CS
-10°C ~ +50°C (14°F~122°F)
30% ~ 90%
60(W) X 60(H) X 120(D)mm (2.4 X 2.4 X 4.9 inches)
510 grm (1.13 lbs)
Model TSE270X TSE271X
DC12V (DC11V-16V)
Approx.3.2W
15.734Hz 59.94Hz
Internal
2P terminal
320 grm (0.71 lbs)
TSE272X
AC120V ± 10% 60Hz ± 1Hz
Approx.6W
15.75Hz 60Hz
Line-lock
Power cord
600 grm (1.32 lbs)
Note: Weight and dimensions are approximate.
Design and specifications are subject to change without prior notice.

Especificaciones del producto

Marca: Elmo
Categoría: No categorizado
Modelo: TSE270X

¿Necesitas ayuda?

Si necesitas ayuda con Elmo TSE270X haz una pregunta a continuación y otros usuarios te responderán


No categorizado Elmo Manuales

Elmo

Elmo HS-2 Manual de Usario

18 Septiembre 2024
Elmo

Elmo TSN400A Manual de Usario

18 Septiembre 2024
Elmo

Elmo CC431E Manual de Usario

18 Septiembre 2024
Elmo

Elmo EV-2000AF Manual de Usario

18 Septiembre 2024
Elmo

Elmo TSE270X Manual de Usario

18 Septiembre 2024
Elmo

Elmo PentaClass ABM Manual de Usario

18 Septiembre 2024
Elmo

Elmo PentaClass AB Manual de Usario

18 Septiembre 2024
Elmo

Elmo TT-02S Manual de Usario

18 Septiembre 2024
Elmo

Elmo PTC-401C IP Manual de Usario

18 Septiembre 2024
Elmo

Elmo LX-2200 Manual de Usario

18 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024