Emperor's Select CSD-46 Manual de Usario

Lee a continuación 📖 el manual en español para Emperor's Select CSD-46 (4 páginas) en la categoría Refrigerador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
03/2021
REFRIGERATED SUSHI DISPLAY CASE
USER MANUAL
MODELS:
Please read and save these instructions for future reference.
#478CSD46HC • 46"
#478CSD53HC • 53"
#478CSD60HC • 60"
#478CSD71HC • 71"
2
DANGER
RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED ONLY BY
TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING
CAUTION
RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. CONSULT REPAIR
MANUAL/OWNER’S GUIDE BEFORE ATTEMPTING TO SERVICE THIS PRODUCT. ALL SAFETY
PRECAUTIONS MUST BE FOLLOWED.
CAUTION
RISK OF FIRE OR EXPLOSION DUE TO PUNCTURE OF REFRIGERANT TUBING; FOLLOW
HANDLING INSTRUCTIONS CAREFULLY. FLAMMABLE REFRIGERANT USED.
CAUTION
RISK OF FIRE OR EXPLOSION DUE TO FLAMMABLE REFRIGERANT USED. FOLLOW HANDLING
INSTRUCTIONS CAREFULLY IN COMPLIANCE WITH LOCAL GOVERNMENT REGULATIONS.
INSTALIMPORTANT SAFEGUARDS
SPECIFICATIONS
!
!
!
!
Item # 478CSD46HC 478CSD53HC 478CSD60HC 478CSD71HC
Length 46⁄" 70⁄"53¼" 60¼"
Width 1" 1" 1" 1"
Height 1" 1" 1" 1"
Capacity 1⁄ cu. ft. 2⁄ cu. ft. 2¾ cu. ft. 3½ cu. ft.
Voltage 115V 115V 115V 115V
HP 1/6 HP 1/6 HP 1/6 HP 1/6 HP
4
SET
1. Set temperature:
Press button, the set temperature is displayed.
Press or to modify the displayed value.
Press button to exit the adjustment and display the unit’s current temperature.
2. If no more buttons are pressed within 10 seconds, the unit’s current temperature will be displayed.
3. Lights: Press button to turn lights ‘on’ or ‘o.
Manual start/stop defrost: Press button and hold for 6 seconds to defrost or stop defrost.
4. Refrigerant LED: When the compressor is running, the LED is on; when the refrigerator temperature
is constant, the LED is o; During the delay start, the LED flashes.
5. Defrost LED: during the defrost cycle, the LED is on; when it stops defrosting, the LED is o.
During the delayed display of defrost, the LED flashes.
SET
SET
ELECTRICAL
FRONT PANEL OPERATION
Please ensure that the required voltage is being supplied at all times.
unit should be plugged into a grounded and properly-sized electrical outlet with appropriate The
over-current protection. Please refer to the electrical requirements on the units nameplate.
unit should have its own dedicated outlet.The
Do not use extension cords.
the unit is not resting on or against the electrical cord.Ensure
the unit is not in use for a long period of time, please unplug the unit from the outlet.If
avoid shock and fire hazards, do not plug in or unplug the unit with wet hands.To
After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so
could cause damage to the compressor.
OPERATION/M

Especificaciones del producto

Marca: Emperor's Select
Categoría: Refrigerador
Modelo: CSD-46

¿Necesitas ayuda?

Si necesitas ayuda con Emperor's Select CSD-46 haz una pregunta a continuación y otros usuarios te responderán




Refrigerador Emperor's Select Manuales

Refrigerador Manuales

Últimos Refrigerador Manuales