Empire BeBa_25978 Manual de Usario

Empire Grúa BeBa_25978

Lee a continuación 📖 el manual en español para Empire BeBa_25978 (5 páginas) en la categoría Grúa. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
CODE: BeBa_25978
Empire Wall Mounted Bath Filler
2
1 NOTES FOR INSTALLATION
2)Please do not connect hot and cold water supply lines in reverse. This could result in hot water flowing from cold
line and cause scalding.
3)The feed-water temperature of water shall not exceed 85° °C. Exceeding 85 may cause scalding, the service life of
faucets might be shortened, or the faucet might be damaged.
4) The valve must be installed on the wall that is strong and thick enough.
5)After installation, please make sure the faucet is securely mounted.
WarningRead all the instructions completely before proceeding. We recommend calling a professional if
you are uncertain about installing this product.
1)Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws.
Minimum and Maximum working pressure : 1 - 5 bar
2 DIMENSIONS(mm)
3 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter.
3
Ø
Either, sheet around the mixer body with fibre cement
sheeting or backfill the exposed channels ready for tiling.
Ensure tiles are cut as close to the plastic template covering
the mixer dome as possible; Remove the plastic template
after the tiling is completed.
Based on the size of the body and the wall type, either
secure it to the noggins or embed it into the wall at an
approximate height. Ensure that the body is installed
level, plumb and square.
Connect the hot(left) and cold(right)supply and the
mixed water pipes using applicable sealing practices.
Remove the plastic tiling templates and test for water
security with the mixer in both open and shut positions
and the diverter open in both positions.
4 INSTALLATION

Especificaciones del producto

Marca: Empire
Categoría: Grúa
Modelo: BeBa_25978

¿Necesitas ayuda?

Si necesitas ayuda con Empire BeBa_25978 haz una pregunta a continuación y otros usuarios te responderán