Epson LQ-2080 Manual de Usario

Epson Printer LQ-2080

Lee a continuación 📖 el manual en español para Epson LQ-2080 (31 páginas) en la categoría Printer. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/31

User’s Guide

24-Pin Dot Matrix Printer

or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,

or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The

information contained herein is designed only for use with this EPSON printer. EPSON is

not responsible for any use of this information as applied to other printers.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of

this product or third parties for damages, losses, costs, or expenses incurred by the

purchaser or third parties as a result of: accident, misuse, or abuse of this product or

unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.)

failure to strictly comply with SEIKO EPSON CORPORATION’s operating and maintenance

instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising

from the use of any options or any consumable products other than those designated as

Original EPSON Products or EPSON Approved Products by SEIKO EPSON

CORPORATION.

EPSON and EPSON ESC/P are registered trademarks and EPSON ESC/P 2 is a trademark

of SEIKO EPSON CORPORATION.

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

IBM is a registered trademark of International Business Machines Corporation.

General Notice: Other product names used herein are for identification purposes only and

may be trademarks of their respective owners. EPSON disclaims any and all rights in those

marks.

FCC Compliance Statement

For United States Users

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio or television

reception. However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

interference to radio and television reception,

which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures.

❑Reorient or relocate the receiving antenna

❑Increase the separation between the

equipment and receiver

❑Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected

❑Consult the dealer or an experienced radio/

TV technician for help.

WARNING

The connection of a non-shielded equipment

interface cable to this equipment will invalidate

the FCC Certification of this device and may

cause interference levels which exceed the limits

established by the FCC for this equipment. It is

the responsibility of the user to obtain and use a

shielded equipment interface cable with this

device. If this equipment has more than one

interface connector, do not leave cables

connected to unused interfaces.

Changes or modifications not expressly

approved by the manufacturer could void the

user’s authority to operate the equipment.

For Canadian Users

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

Declaration of Conformity

According to ISO/IEC Guide 22 and EN 45014

Manufacturer:

SEIKO EPSON

CORPORATION

Address: 3-5, Owa 3-chome, Suwa-shi,

Nagano-ken 392-8502 Japan

Representative: EPSON EUROPE B.V.

Address: Prof. J. H. Bavincklaan 5 1183

AT Amstelveen

The Netherlands

Declares that the Product:

Product Name: Dot Matrix Printer

Model: P911B

Conforms to the following Directive(s) and

Norm(s):

Directive 73/23/EEC:

EN 60950

Directive 89/336/EEC:

EN 55022 Class B

EN 61000-3-2

EN 61000-3-3

EN 50082-1

IEC 801-2

IEC 801-3

IEC 801-4

January 1999

H. Horiuchi

President of EPSON EUROPE B.V.

Control Panel Buttons and Lights

n = On

f = Flashing

o = Off

Tear Off/Bin button

●Advances continuous paper to the tear-off

position.

●Feeds continuous paper backward from the

tear-off position to the top-of-form position.

●Selects a cut-sheet feeder bin when the

cut-sheet feeder is installed.

●Turns on the card mode to print on

postcards and envelopes. See

Chapter 3.

Tear Off/Bin lights

●f f when continuous paper is in the tear-

off position.

●o n when bin 1 of the optional cut-sheet

feeder is selected.

●n o when bin 2 of the optional cut-sheet

feeder is selected.

●n n when the printer is in the card mode.

Micro Adjust

When you hold down the Pause button for three seconds,

the printer enters the micro adjust mode. In this mode, you

can press the D and U buttons to adjust the top-of-form or

tear-off position. See Chapter 2.

Load/Eject button

●Loads a single sheet of

paper.

●Ejects a single sheet of

paper if a sheet is loaded.

●Loads continuous paper

from the standby position.

●Feeds continuous paper

backward to the standby

position.

Font button

Selects the font.

See Chapter 5.

Font lights

Indicate which font

is selected.

Paper Out light

●On when no paper is

loaded in the selected

paper source or paper is

not loaded correctly.

●Flashes when paper has

not been fully ejected or

a paper jam has

occurred.

Operate button

Turns the printer on

and off. The printer is

off when the top of

this button is even

with the button

protectors.

Pause button

Stops printing

temporarily, and resumes

printing when pressed

again.

Pause light

●On when the printer is

paused.

●Flashes when the

printer is in the micro

adjust mode.

LF/FF button

●Feeds paper line by

line.

●Ejects a single sheet

or advances

continuous paper to

the next top-of-form

position when held

down.

Condensed button

Turns on the

condensed mode.

Condensed light

Lights up when the

condensed mode is

on.

Especificaciones del producto

Marca:	Epson
Categoría:	Printer
Modelo:	LQ-2080
Color del producto:	Zwart
Ancho:	111 mm
Profundidad:	112 mm
Altura:	37 mm
Método de montaje:	Plafond
Capacidad máxima de peso:	11.3 kg
Rango de ángulo de inclinación:	-16.5 - 16.5 °