Ernitec 0070-08214 Manual de Usario

Ernitec Cámara de vigilancia 0070-08214

Lee a continuación 📖 el manual en español para Ernitec 0070-08214 (2 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Special Announcement

, For more i nform ation please refe r to website.

Fully u nderstand this do cument before using this device,

and strictly observe rules in this document when using this

device. If you insta ll this device in public pla ces, provide the

tip "You have entered the area of electronic surveillance" in

an eye-catching place. Failure to correctly use electrical

products may cause fire and severe injuries.

ŸStrictly observe installation requirements when installing

the device. The manufacturer shall not be held responsible

for device damage caused by users' non-conformance to

these requirements.

ŸStrictly conform to local electrical safety standards and use

power adapters that are marked with the LPS standard

when installing and using this device. Otherwise, this

device may be d amaged.

ŸUse accessories delivered with this device. The voltage

must meet input voltage requirements for this device.

ŸIf this device is installed in places with unsteady voltage,

ground this device to discharge h igh energy such as

electrical surges in order to prevent the power supply from

burning out.

ŸWhen this device is in use, ensure that no water or an y

ŸAvoid heavy loads, in tensive shakes, and soaking to

preve nt damages during transportation and storage. The

warranty does not cover any device damage that is caused

durin g secondary p ackaging and transportation after the

original packaging is taken apart.

ŸProtect this d evice from fall-down and intensive strikes,

keep the device away from magnetic field interference, and

do not install the device in places with shaking surfaces or

under shocks.

ŸClean the device with a soft dry cloth. For stubborn dirt, dip

the cloth into slight neutral clea nser, gently wipe the dirt

with the cloth, and then dry the device.

ŸDo not jam the ventila tion opening. Follow the installation

instructions provided in this document when installing the

device.

ŸKeep the device away from heat sources such as radiators,

electric heaters, or other heat equipment.

ŸKeep the device away from moist, dusty, extremely hot or

cold places, or places with stron g electric radiation.

ŸIf the device is installed outdoo rs, take insect- and

moisture-proof measures to avoid circuit board corrosion

that can affect monitoring.

ŸRemove the power plug if the device is idle for a long time.

ŸBefore unpacking, check whether the fragile sticker is

damaged. If the fragile sticker is damaged, contact

customer services or sales personnel. The manufacturer

shall not be held responsible for any artificial damage of the

fragile sticker.

ŸAll complete products sold by the manufacturer are

delivered along with nameplates, quick setup guide and

accessories after strict inspection. The manufacturer shall

not be he ld responsible for counterfeit products.

ŸThe manufacturer will update this manual according to

product function enhancement or changes and regularly

update the software and hardware described in this manual.

Update information will be added to new versio ns of this

manual without prior notice.

ŸThis manual may contain misprints, technology information

that is not accurate enough, or product function and

operation description that is slightly inconsistent with th e

actual prod uct, the final interpretation of company is as a

standard.

ŸThis manual is only for reference and does not ensure that

the information is to tally consistent with the actual prod uct.

For con sistency, see the actual product.

Precautions

Open the package, check the appearance of product for no

obvio us damage, and confirm the item list for table 1-1 is

consistent.

Table 1 1- Packing list

2.1 Device Ports

Different devic es may have differe nt ports and multi-head

cable; Please refer to the ac tual product.

NOTE

liquid flows into the device. If water or liquid unexpectedly

flows into the device, immediately power off the device and

disconnect all cables (such as power cables and network

cable s) from this device.

ŸDo not focus strong light (such as lighted bulbs or sunlight)

on this device. Otherwise, the service life of the image

sensor may be shortened.

ŸIf this device is installe d in places where thunder an d

lightning frequently occur, ground the device nearby to

discharge high energy such as thunder strikes in order to

preve nt device damage.

It alerts you to moderate dangers which, if not

avoid ed, may cause minor or moderate injuries.

It alerts you to risks. Neglect of these risks may

cause device damage, data loss, device

performance deterioration, or unpredictable

results.

It provides additional information.

NOTE

CAUT ION

WARNING

CAUTION

Device Structure2

Open Package Examination

Bullet Network Camera

Quick Setup Guide

Installation location sticker

Accessory package

Component Quantity Remark

Figure2 1- Multi-head cable

Table 2-1 Multi-head cable description

Figure 2 3 Install SD card-

Port

OUT

Connects to a standard Ethernet

cable or PoE . The green light is on,

the network connection is normal;

the yellow light flashes when the

data is transmitted. Some models

maybe not have the lights; Please

refer to the actual product.

Connects to an external audio

device such a s a speaker.

Applied for

camera with

audio

function

Receives an a nalog audio s ignal

from devices such as a sound

pickup device.

Connects to a 12V direct current

(DC) power supply.

Alarm outpu t COM Applied for

alarm

function

Alarm outpu t terminal

Alarm input COM

Alarm input terminal

Network

access port

Support PoE

supply.

Core Description Remark

Audio output

Power suppl y

(DC 12V)

Audio input

port

OUT

Reset PWR SD

2-1/4UNC x8

4-φ4.5

100

275

107

273~~303 ajuﬆable

2.3 Fill light settings

Camera’s fill lig ht has four modes, they are intelligen t dual light (

current fill light will switch to warm li ght after an al arm is triggered,

and will switch back to the original fill l ight for 30s after the alert is

released.), warm light, infrared la mp and none (Cl ose the fill light

and the color of image will stay in previous mode).

The different cam eras can be set d ifferent fill light modes, pl ease

set fill light modes according to the actual scene.

Day mode: It can be used in the scene with sufficie nt ambient li ght

for 24 hours, do not turn on the fill light, and the image is in color.

Night mode: it can be used in the scene where there is insuffici ent

ambient light for 24 hours , turn on the fil l light (it can b e selected

according to the four mode s of the fill light).

Auto mode: Automatically switch the fill light mode ac cording to

the luminance of the environment.

Timing mode: Set the start and end time of the day, this time

period is day m ode for camera.

Different devic es may have differe nt fill lights; Please refer to

the actual product.

NOTE

2 2 Camera Dimensions.

Figure 2 2 -Dimensions Unit: mm （）

Differe nt devices may have different dimensions; Please

refer to the actual product.

Deimos Network Camera

5MP Fix Lens – day & night colour

Quick Setup Guide

Item no.: 0070-08214

Step 3 Turn on the camera, connect the monitor, adjust the

camera screen to the corresponding area. If user

need to adjust the position of the camera, he can

loosen the three-axis screws on bracket to manually

adjust the position, then tighten the screws after

finishing adjustment, as shown in figure 3-2.

Step3 Click Login, the main page is displayed.

4.2 Modify IP address

Choose > > , the Conﬁguration Device Local Network Local

Network page is displayed.

Input the IP address in the IP Address box and click as Apply

shown in ﬁgure 4-2.

After the IP address is set successfully, please use the new IP

address to login the Web interface.

Figure 4 2 - Local Network

4.3 Browsing Video

To ensure the real-time video can be played properly, you muﬆ

perform the following operation when you login the web for the ﬁrﬆ

time. If you can vi the video immediately please ignore itew , .

Step 1 The Internet Explorer. Choose Tools Internet options > >

Security T > ruﬆed sites > , in the display dialog boxSites ,

click as shown in 4 3 , Add ﬁgure - .

Step 2 In the Internet Explorer, choose > > Tool Internet Options

Security Download unsigned > , and set Cuﬆomer level

ActiveX control initialize and script ActiveX and

controls not marked as safe for scripting under ActiveX

controls and plug-ins to enable, as shown in ﬁgure 4-4.

User Name

Password

English

Figure 4 1 - Login

4.1 Login

Step 1 Open the Internet Explorer, enter the IP address of IP

camera (the default value: 192.168.0.120) in the address

box, and press Enter. The login page is displayed as

shown in ﬁgure 4-1 .

Step Input the user name and password.2

Quick Configuration(e.g IE)

The default user name and password are both admin. Modify the

password when user logs into the syﬆem for the ﬁrﬆ time to

ensure syﬆem security.

You can change the syﬆem display language on the login page.

F 3 2igure - Finish installation

NOTE

Figure 3-1 Installing bracket

The Bullet Network Camera can be installed on the column

or wall. You can select an installation mode based on site

requirements. If the camera is installed on a concrete wall,

install the expansion bolts before installing the bracket. If the

camera is installed on a wooden wall, use self-tapping

screws to install the bracket directly.

NOTE

3Device Installation

NOTE

During installation, please take care of the waterproofness of

the bracket and line. Please make sure the head of line bend

down then go upward, avoid the water go along the line into

the bracket.

The wall where the support is mounted must be able to

withstand at least three times of the total weight of the support

and the camera.

You can route cables from the top or from the side. If you use the top

routing method, drill a hole in the surface first. If you use the side

routing method, please route the multi-head cable out from the side

gap at the bottom of the camera.

Installation Steps:

Step 1 Stick the Installation location sticker on the ceiling or

wall. Drill four holes based on the marks on the

sticker. Drive the plastic anchors into the holes,

Install the camera on the ceiling or wall and fix the

screws as shown in figure 3-1.

Step 2 Connect the multi-connector cable.

Local Network

Netw or k Card ID

IP Protoco l

DHCP

IP Addre ss

Subnet Mask

Defaul t Gateway

Prefer red DNS Server

Alternat e DN S Serv er

MT U( 12 80-1 50 0)

Re fr esh Ap pl y

IP v4

19 2. 168 .0 .1 20

25 5. 255 .2 55 .0

19 2. 168 .0 .1

19 2. 168 .0 .2

15 00

Figure 4 3 - Adding a trusted site

Step 2 In the Internet Explorer, choose Tool Internet Options > >

Security > Cuﬆomer level, and set Download unsigned

ActiveX control and initialize and script ActiveX controls not

marked as safe for scripting under ActiveX controls and

plug-ins to Enable, as shown in ﬁgure 4-4.

Step 3 Download and install the player control as prompted.

If the repair tips displayed when installing the control , please

ignore the prompt, and continue the installation, the login page is

displayed when the control is loaded.

To browse a real-time video, click Live Video. The Live Video

page is displayed, as shown in figure 4-5.

Figure 4 5 - Live Video

Figure 4 4- Configuring ActiveX control and plug-in

NOTE

ht tp :// 19 2. 16 8 . 0.1 20

Li ve V ide o Pl ayba ck Pe rson ne l Cou nt Co nf ig ur ation

Not e: Activ eX is being us ed to play l ive v ideo now

Swi tch to VL C, then p lay the v ideo

Swi tch to Pl ugin, t hen pla y the vid eo

St rea m

str eam 1

4.4 Intelligent Analysis

At Intelligent Analysis interface user can set the " > Conﬁguration " ,

parameters of Perimeter Single Virtual Fence Double Virtual Fence , , ,

Multi Loiter Converse and Personnel Count as shown in 4 7 , , ﬁgure - .

Figure 4 7 - Intelligent Analysis

Li ve Vi deo Pl ayb ack Pe rso nne l Cou nt Co nfi gur ati on

Dev ice Inf o

Str eam

Dev ice

Ext ernal D evice

Int ellig ent Anal ysis

Per imete r

Sin gle Vir tua l Fen ce

Dou ble Virtua l Fen ces

Mul ti Loit er

Con verse

Per sonne l Count

Ala rm

AI Mu ltiob ject

Dev ice Rec ord

Pri vacy M a sking

Net work Se rvice

Pri vileg e Manag er

Pro tocol

Dev ice Log

Loc al Conf ig

Mai ntena nce

Pe rim ete r

Ena ble

Sen sitiv ity

Out put Cha nnel

Ala rm Reco rd

SMT P

FTP U plo ad

Cle ar

Ref resh

App ly

Sun

4.5 AI Multi object

At “Configuration > AI Multi object” interface, user can enable face

detection, full body detection, vehicle detection, set the other

parameters of detection, as shown in figure 4-8.

Face De te cti on

Fullbody Det ect ion

Veh icl e De tec tio n

Dis play Tra ce I nfo

Sh ow Dete ction Are a

Co nfi de nce Coe ff icient

Fa ce Pixe l Min (30 -300)

Bo dy Pixe l Min (30 -300)

Veh icl e Pi xel M in(30-3 0 0)

Ima ge Mat tin g Qu a lity

Sn apsho t M od e

Upl oa d Image Inte rval(1- 10 s)

FTP Upl oa d Ima ge Mat tin g

FTP Upl oa d Whole Ima ge

Alg orith ms Lib rar y Ver sio n

Figure 4 8 - AI Multi-object

1 Personnel Count: User can query the data of personnel count,

through year, month, day. The statistics can be downloaded. The

data can be shown by line chart, histogram, list.

2 AI Live video: Click the icon to view the snapshots of human face

or license plate (click “Face” or “Plate” to switch ).

The bottom page will show the captured images of vehicle and

human .

Pedestrian direction

15°

If user requires higher

accuracy of personnel count,

we recommend the user to

install camera and draw the

line following a gure 4-6. s ﬁ

Figure 4 6 - Installation of personnel count

CAU TION

NOTE

For better capture performance, it is recommended to use 6mm

focus length lens or above.

Especificaciones del producto

Marca:	Ernitec
Categoría:	Cámara de vigilancia
Modelo:	0070-08214

¿Necesitas ayuda?

Si necesitas ayuda con Ernitec 0070-08214 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Cámara de vigilancia Ernitec Manuales

Ernitec 0070-24127-WATERPROOF Manual de Usario

16 Septiembre 2024

Ernitec 0070-08117 Manual de Usario

15 Septiembre 2024

Ernitec Wolf Pro Manual de Usario

13 Septiembre 2024

Ernitec 0070-08112 Manual de Usario

4 Septiembre 2024

Ernitec 0070-08214 Manual de Usario

4 Septiembre 2024

Ernitec 0070-08215 Manual de Usario

4 Septiembre 2024

Ernitec 0070-08316 Manual de Usario

4 Septiembre 2024

Ernitec Orion DX 832 IR Manual de Usario

2 Septiembre 2024

Ernitec TAURUS DX 622 Manual de Usario

2 Septiembre 2024

Ernitec 0070-04344IR Manual de Usario

2 Septiembre 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024

Vivotek AI-108 Manual de Usario

27 Octubre 2024

Acti E88 Manual de Usario

27 Octubre 2024

Yale WIPC-303W Manual de Usario

27 Octubre 2024

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024

Airlive DM-720 Manual de Usario

27 Octubre 2024

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024

Grandstream GXV3615W Manual de Usario

27 Octubre 2024

Vivotek IP8133 Manual de Usario

27 Octubre 2024

Olympia OC 1280P Manual de Usario

27 Octubre 2024