Extron TLP Pro 525C Manual de Usario
Lee a continuación 📖 el manual en español para Extron TLP Pro 525C (10 páginas) en la categoría Monitor. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/10
1
TLP Pro 525C Series • Setup Guide
Overview
The Extron TLP Pro 525C is a 5-inch Cable Cubby touchpanel. It has a ip-up, 800x480 (WVGA), LCD touchscreen with
24-bit color depth. The TLP Pro 525C NC is a streamlined model, with a set of features that adhere to government and military
security protocols.
These touchpanels are suitable for any AV application requiring a Cable Cubby touchpanel with a customizable interface.
This guide provides instructions for experienced installers to mount and install these touchpanels. For more complete instructions,
see the at TLPPro 525C and 725C Series User Guide www.extron.com.
Setup Checklist
Get Ready
Download and install the latest version of the following software:
GUI Designer — For designing layouts for Extron TouchLink® Pro touchpanels and third party touch interfaces.
Global Configurator® Professional and Global Configurator Plus — For setting up and conguring the control
processor and touchpanel.
Toolbelt — Provides device discovery, device information, rmware updates, and conguration of network settings,
system utilities, and user management for TouchLink Pro devices.
Global Scripter® — Provides an integrated development environment for Extron control systems programming.
NOTE: All four software programs are available from www.extron.com.
Obtain the following network information from your network administrator:
DHCP status — (on or off). If DHCP is off, you must also obtain:
IP address Subnet mask Gateway
User name — This can be either or .
Password — The factory congured passwords for all accounts on this device have been set to the device serial
number. Passwords are case sensitive.
NOTE: If the device is reset to default settings, the password will be the default password conguration. The default
password is (for either or ).
Make a note of the touchpanel MAC address.
Make sure you are familiar with all the included parts and have all the necessary Tools Required for Installation (see
page 4) for installing the cable cubby.
Included Parts
Check that all the following parts are included:
3/8” Hole Plug (4)1/4” Hole Plug (1)
#6-32 Sc w (4)#6 Star Washer (4) re
TLP Pro 525C or
TLP Pro 525C NC (1)
2-space
MAAP Frame (1)
TLP Pro 525C
Connectivity
Bracket (1)
Short Clevis Pin (1)
Cotter Pin (1)
HDMI Lockit (1)
Tie wrap (1)
5-cable Pass-through
Plate (1)
Figure 1. TLP Pro 525C Included Parts
NOTE: Active or passive MAAPs must be purchased separately (see www.extron.com).
2
TLP Pro 525C Series • Setup Guide (Continued)
Mount and Cable All Devices
ATTENTION:
• Do not power on the touchpanels until you have read the attention notication in the “Base Features” section of the
TLPPro 525C and 725C Series User Guide.
• Ne branchez pas les écrans tactiles avant d’avoir lu la mise en garde de la section «Base Features » du TLPPro 525C and
725C Series User Guide.
Cut a hole in the table (see Step 1 — Verify Cut-out Dimensions Step 2 — Cut the Surface on page 4 and on
page 5).
Run cables to the cable cubby (see on page 5).Step 3 — Run all Cables
Install modules into the Cable Cubby enclosure. Multiple optional modules can be installed in the TLP Pro 525C Cable Cubby
in a variety of congurations. Decide which modules and which conguration best serve your needs. Options include:
• Cable Retractors (see on page 5).Step 4 — Install Cable Retractors (Optional)
• Pass-through Cable Modules (see Step 5 — Assemble the Pass-through Cable Module (Optional) on page 6).
• AAP Modules (see on page 6).Step 6 — Assemble the MAAP Module (Optional)
• Power Modules (see on page 7).Step 7 — Install Modules
Use the setup menu for initial conguration of the touchpanel (see on page 10).Setup Menu
Mount the units (see on page 9).Step 8 — Mounting the Enclosure
Connect the touchpanel to a Power over Ethernet (PoE) injector (see on page 10).figure 13
Connect the power injector to the LAN and power it on (see ).figure 13
Set up the Touchpanels for Network Communication
Connect the PC that you are using for setup, the control processor, and the touchpanel to the same Ethernet subnetwork.
Use the (see page 10) or Toolbelt to set the DHCP status and, if necessary, the IP address, subnet mask, Setup Menu
gateway, and related settings for the touchpanel.
Configure the Touchpanels
The , the , and the GUI Designer Help File Global Configurator Help File Toolbelt Help File provide step-by-step instructions and
detailed information. The includes an introduction to the software and sections on how to start a Global Configurator Help File
project and conguration.
Global Scripter provides an Extron-exclusive Python library (ControlScript®) and Global Scripter modules to get you started.
3
Front Panel Features
A — The TLP Pro 525C series has a 5-inch LCD screen
touchscreen with a 800x480 resolution.
B — Detects motion between three to ve Motion sensor
feet from the touchpanel, and at least 15° from the center
axis.
• When no motion has been detected for a user-
dened period of time, the touchpanel enters sleep
mode.
• When motion is detected by the sensor, the screen
display is restored and active.
C — This LED shows the Communication LED
conguration and connection status of the touchpanel:
• Unlit during normal operation (the touchpanel is
congured and connected to an IP Link Pro control
processor).
• Blinks red if the touchpanel has been congured but
is not connected to an IP Link Pro control processor.
• Permanently lit if the touchpanel has not been
congured and is not connected to an IP Link Pro
control processor.
The indicator can be toggled between enabled and
disabled, using the (see page 10).
Setup Menu
D — This sensor monitors ambient light level Light sensor
and adjusts screen brightness, based on the settings
congured using the .
Setup Menu
A
A
A
A
A
A
B
B
B
B
B
B
C
C
C
C
C
C
D
D
D
D
D
D
B
B
B
B
B
B
F
F
F
F
F
F
E
E
E
E
E
E
Figure 2. TLP Pro 525C Front Panel and Enclosure
Features
Enclosure Features
E – The left side of the lid hinge mechanism contains a switch. When the lid is closed, the switch sends the Activation switch
screen into sleep mode. When the lid is opened, the screen display is restored and active.
When the lid is shut, the screen is not activated by motion near the touchpanel.
F — A single speaker, located on the side of the enclosure, provides audible feedback for the user.Speaker
Base Panel Features
These features are accessed from underneath the touchpanel.
A — Pressing the button activates the setup Menu button
menu (see ).Setup Menu
B — Pressing the button allows the unit to be Reset button
reset in any of three different modes (for an overview, see Reset
Modes: a Brief Summary on page 10).
C — Provides feedback about the reset status when Reset LED
the user presses the button (see Reset Modes: a Brief
Summary).
D — Compatible with USB 2.0.USB port
E — The TLP Pro 525C must be powered LAN/PoE port
through this port (see Step 9 — Connecting the Power to the
Touchpanel on page 10 for details).
MENU RESET
USB
275 mA
LAN / PoE
D
D
D
D
D
D E
E
E
E
E
EA
A
A
A
A
AB
B
B
B
B
BC
C
C
C
C
C
Figure 3. TLP Pro 525C Base Panel
ATTENTION:
• Do not power on the touchpanel until you have read the attention notication in the “Base Features” section of the TLPPro
525C and 725C Series User Guide.
• Ne branchez pas les écrans tactiles avant d’avoir lu la mise en garde de la section «Base Features » du TLPPro 525C and
725C Series User Guide.
NOTE: Once the enclosure is permanently mounted, the and buttons are under the table and may be difcult to
access. Use the setup menu to congure the TLP Pro 525C before mounting the unit.
Especificaciones del producto
Marca: | Extron |
Categoría: | Monitor |
Modelo: | TLP Pro 525C |
¿Necesitas ayuda?
Si necesitas ayuda con Extron TLP Pro 525C haz una pregunta a continuación y otros usuarios te responderán
Monitor Extron Manuales
19 Septiembre 2024
Monitor Manuales
- Monitor Sony
- Monitor Samsung
- Monitor LG
- Monitor Huawei
- Monitor HP
- Monitor Philips
- Monitor Panasonic
- Monitor Daewoo
- Monitor JVC
- Monitor Medion
- Monitor Toshiba
- Monitor Xerox
- Monitor Abus
- Monitor Ag Neovo
- Monitor Acer
- Monitor AOC
- Monitor Alienware
- Monitor Archos
- Monitor Hikvision
- Monitor BenQ
- Monitor Sharp
- Monitor Silvercrest
- Monitor Hitachi
- Monitor Thomson
- Monitor Pyle
- Monitor Asus
- Monitor Westinghouse
- Monitor LC-Power
- Monitor 3M
- Monitor Lenovo
- Monitor EMOS
- Monitor Denver
- Monitor Omron
- Monitor Optoma
- Monitor Schneider
- Monitor Sanyo
- Monitor Gigabyte
- Monitor Mitsubishi
- Monitor Nec
- Monitor GlobalTronics
- Monitor Marquant
- Monitor Cisco
- Monitor Haier
- Monitor Iiyama
- Monitor Kubo
- Monitor IFM
- Monitor Fujitsu
- Monitor Asrock
- Monitor Neumann
- Monitor RCF
- Monitor Barco
- Monitor Dahua Technology
- Monitor Boss
- Monitor LaCie
- Monitor Behringer
- Monitor Godox
- Monitor Marshall
- Monitor Dell
- Monitor Focal
- Monitor InFocus
- Monitor Midas
- Monitor Planar
- Monitor MSI
- Monitor Orion
- Monitor Viewsonic
- Monitor Ikan
- Monitor Chauvet
- Monitor Cooler Master
- Monitor Hannspree
- Monitor Marshall Electronics
- Monitor Vivitek
- Monitor Newstar
- Monitor Newline
- Monitor Genelec
- Monitor Interlogix
- Monitor Eizo
- Monitor EverFocus
- Monitor Eurolite
- Monitor RGBlink
- Monitor POSline
- Monitor Dynaudio
- Monitor NZXT
- Monitor Monoprice
- Monitor Yorkville
- Monitor Fostex
- Monitor Prowise
- Monitor HyperX
- Monitor Crestron
- Monitor HKC
- Monitor Ibm
- Monitor Maxell
- Monitor Provision ISR
- Monitor Brandson
- Monitor Advantech
- Monitor ELO
- Monitor Belinea
- Monitor AVer
- Monitor Triton
- Monitor Vimar
- Monitor Kogan
- Monitor Speco Technologies
- Monitor Posiflex
- Monitor MicroTouch
- Monitor EKO
- Monitor Mirai
- Monitor Palmer
- Monitor COMMBOX
- Monitor Pelco
- Monitor Lilliput
- Monitor KRK
- Monitor Ernitec
- Monitor Datacolor
- Monitor HELGI
- Monitor Desview
- Monitor DoubleSight
- Monitor Approx
- Monitor Oecolux
- Monitor AMX
- Monitor Transvideo
- Monitor KeepOut
- Monitor Elvid
- Monitor AIS
- Monitor Atlantis Land
- Monitor IStarUSA
- Monitor Qian
- Monitor UPERFECT
- Monitor Freedom Scientific
- Monitor OSEE
- Monitor GVision
- Monitor Cocopar
- Monitor Titan Army
Últimos Monitor Manuales
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024