FaseLunare VEGA Manual de Usario

Lee a continuación 📖 el manual en español para FaseLunare VEGA (12 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
FASELUNARE VEGA MANUAL 1.0
Hello!
Thank you for choosing VEGA!
When we started thinking about our first module, we thought about what we wanted to put in our rack. We wanted a rhythmic section that
would allow us to have multiple sounds simultaneously.
Another thing we wanted was to save space because the number one enemy of modular systems is the space.
So we started thinking about VEGA. It had to be small and have multiple functions.
In the end, we came to have a module of only 6HP with 4 voices dedicated to percussive sounds with the possibility of having synthesis
and samples as a sound source.
Each voice therefore has 4 samples (stored on SD card) and 1 synth engine dedicated to specific types of sound (Kick, Snare, Hats x 2)
The interface is very simple, 4 voice buttons (amber), 1 function button (amber), 2 RGB encoders and a series of colored LEDs for the
pages.
FOR QUESTIONS ABOUT VEGA, PLEASE WRITE TO SUPPORT@FASLEUNARE.COM
USER INTERFACE
A - SD CARD - Used to store samples and preset.
Each voice uses and they must4 samples in wave format 44100 Mono
be named: A1.wav, A2.wav, A3.wav, A4.wav for the first voice (K), B1.wav,
B2.wav, B3.wav, B4.wav for the second voice (L), C1.wav, C2.wav, C3.wav,
C4.wav for the third voice (M) and D1.wav, D2.wav, D3.wav, D4.wav for the
last voice (N).
B - PAGES - A key point of the vega UI is pagination, the 4 leds (B)
indicate the different pages. Each page hosts 2 parameters.
C - FUNCTION - The function button used alone allows you to change the
parameters page. When used in tandem with one of the voice buttons, this
activates the mode.MUTE
D - METER - The 5 LEDs indicate the value of the parameters and, on the
first page, indicate the sound source (samples or synthesis).
E - F - ENCODERS - The 2 encoders are , which means that differentRGB
colors correspond to different functions. corresponds to theGREEN
PARAMETERS BLUE SOURCE RED, corresponds to the selection and
indicates the selection and storage of the .PRESETS
G H I J VOICE- - - - selection buttons. Select the voice to edit by pressing
the corresponding button. When a voice is selected, it is brighter. Pressing
the C button MUTEtogether with one of the voice buttons enters the
mode. Pressing again exits the MUTE mode. While in MUTEC + VOICE
MODE, the button flash with a FADE IN and FADE OUT effects.
K L M N VOICE TRIGGERS -- - - - Each VEGA voice has its own trig
compatible with the Eurorack standard. Accept trig signals from other
modules and external sequencers.
O - ACCENT TRIGGER - This additional trigger adds an accent at the L
VOICE, normally the L voice is dedicated to the CLOSED-HATS SOUNDS,
when the accent is triggered, the release time of the sound is extended
creating an OPEN-HATS EFFECTS . The release time is fixed.
P - AUDIO OUTPUT - All the 4 voices are internally summed and sent to
the .AUDIO OUTPUT

Especificaciones del producto

Marca: FaseLunare
Categoría: No categorizado
Modelo: VEGA

¿Necesitas ayuda?

Si necesitas ayuda con FaseLunare VEGA haz una pregunta a continuación y otros usuarios te responderán




No categorizado FaseLunare Manuales

No categorizado Manuales

Últimos No categorizado Manuales